Holesaw Pilot Drill - CobaltThis TIMCO HSS Cobalt Holesaw Pilot Drill Is Designed For Use With Compatible Holesaw Arbors When Cutting Metal And Other Tough Materials. The 135° Split Point Helps Prevent Bit Drift For Accurate Starts, While HSS Cobalt Construction Supports Faster Penetration And Improved Wear Resistance In Trade And DIY Drilling Applications.
Holesaw Pilot Drill - HSS - LongThis Long HSS Pilot Drill Is Designed For Use With Compatible Holesaw Arbors, Providing Accurate Centre Location When Cutting Metal, Timber And Plastics. The 118° Split Point Helps Reduce Bit Drift And Supports Faster Penetration, Making It Suitable For Trade And DIY Holesaw Applications Where Clean, Controlled Starts Are Required.
Holesaw Pilot Drill - HSSTIMCO Holesaw Pilot Drill For Use With Compatible Holesaw Arbors In Cutting Applications. The HSS Construction Supports Reliable Drilling Performance, While The 135° Split Point Helps Reduce Bit Drift And Improves Penetration Speed. Suitable For Accurate Pilot Holes When Preparing Cuts With Holesaws In Trade, Workshop, And Maintenance Use.
Holesaw Arbor - SDS Plus ShankThis TIMCO Holesaw Arbor Is Designed For Use With Compatible Holesaws And SDS Plus Equipped Drills, Providing A Secure Drive Connection For Cutting Clean, Accurate Openings. Supplied With A Pilot Drill, It Supports Controlled Hole Starting And Is Suitable For 14 To 30mm Holesaws In Electrical Installation, Plumbing, Joinery, And General Site Work. The SDS Plus Shank Offers Reliable Tool Engagement For Repeated Trade Use.
Holesaw Arbor - Hex ShankTIMCO Holesaw Arbor With Hex Shank For Secure Fitting In Standard Drill Chucks And Compatible Power Drills. Supplied With A Pilot Drill, It Is Designed For Accurate Hole Starting And Reliable Cutting When Used With 14 To 30mm Holesaws. Suitable For Electrical Installation, Joinery, Plumbing And General Trade Applications Requiring Clean, Controlled Holes In Compatible Materials.
Holesaw - Constant PitchThis Constant Pitch Holesaw Uses A M42 Grade HSS Steel Cutting Edge With 8% Cobalt For Durable Drilling In Metal, Stainless Steel And Wood. The Tooth Pattern Supports Smooth Cutting With Reduced Chatter, Especially On Thin Sheet Metal. Diameter Marking On The Body Aids Quick Size Identification, With Cutting Depths Up To 38mm In Wood, 3mm In Thin Sheet Metal And 2mm In Stainless Steel.
Holesaw - Variable PitchThis Variable Pitch Holesaw Uses A High Quality M3 Grade HSS Steel Cutting Edge For Clean, Accurate Cutting In Wood, Plastic, Non Ferrous Metals And Man Made Boards. The Variable Pitch Tooth Pattern Improves Dust Clearance And Cutting Efficiency, While The Diameter Stamped Body Supports Fast Size Identification. Suitable For Power Tool Applications, It Offers 38mm Cutting Depth In Wood And 3mm In Thin Sheet Metal.
Driver Bit & Ground Jobber Drill Bit SetThis TIMCO Mixed Set Contains Quick Release HSS Ground Metal Drills, S2 Driver Bits, Socket Drivers And A Magnetic Adaptor For Fast Bit Changes Across Drilling And Fixing Tasks. Suitable For Trade And DIY Use, It Supports Metal Drilling, Screwdriving And Socket Applications, With Components Stored In A Robust Weatherproof Case For Site Or Workshop Use.
Ground Jobber & Masonry Drill SetThis Mixed Drill Set Includes 12 HSS Ground Metal Drills With A 135° Quick Start Split Point For Accurate Starting In Steel And General Metalwork, Plus 5 Carbide Tipped Masonry Drills For Brick, Block And Masonry Applications. Supplied In A Robust Weatherproof Case For Site, Workshop And Trade Use.
Flat Wood Bit SetThis TIMCO Flat Wood Bit Set Includes Quick Release Spade Drills For Clean, Accurate Holes In Timber And Sheet Wood. Manufactured From Carbon Steel With A Bright Finish, Each Bit Uses A Three Point Design And Compound Angle, Ground Recessed Cutting Edge For Faster Drilling. The 1/4 Inch Hex Shank Fits 3 Jaw Chucks And Quick Release Adaptors, Supplied In A Weatherproof Case.
Masonry Drill Bit SetThis TIMCO Masonry Drill Bit Set Contains 15 Carbide Tipped Drill Bits For Common Fixing Hole Sizes Used With Plastic Plugs. Made From Hardened Carbon Steel, Each Bit Features A 135° High Grade Industrial Carbide Tip, Ground Flute And Heat Treated Construction For Reliable Drilling In Masonry. Supplied In A Robust Weatherproof Case With A Silver And Black Finish.
Broaching Cutter Replacement Pilot PinThis Replacement Pilot Pin Is Designed For Use With Broaching Cutters To Accurately Centre The Bit When Drilling Metal. Manufactured From M2 Grade HSS Steel, It Supports Clean Cutter Alignment And Reliable Performance In Workshop, Site, Fabrication And Maintenance Applications.
Broaching Cutter - ShortDesigned For Magnetic Drills, This Short Broaching Cutter Is Manufactured From M2 Grade HSS Steel For Drilling Heavy Gauge Non-Alloy Metals. It Provides A 30mm Cutting Depth And Is Supplied With A Pilot Pin To Help Maintain Accurate Alignment. Use With The Correct Pilot Rod To Prevent Drifting During Metal Drilling Applications.
Broaching Cutter - LongDesigned For Accurate Hole Cutting In Heavy Gauge Non Alloy Materials, This Long Broaching Cutter Is Manufactured From High Grade M2 HSS Steel For Use With Magnetic Drills. It Provides A 50mm Cutting Depth And Is Supplied With A Pilot Pin To Help Prevent Drifting, Supporting Clean, Controlled Drilling In Metal Fabrication, Site Work And Engineering Applications.
Step DrillThe TIMCO Step Drill Is Designed For Drilling, Enlarging And Deburring Accurate Holes In Thin Materials, Including Alloy And Non Alloy Metals Up To 4mm Thickness. Made From M2 Grade HSS Steel, It Features A Titanium Nitride Coating To Reduce Friction And Extend Service Life. A 3 Flat Shank Helps Prevent Chuck Slip, While Clearly Marked Steps Support Fast Diameter Selection.
De-Burring CountersinkA Single Flute Countersink Designed For Cleaning, Chamfering And De Burring Alloy And Non Alloy Materials. Manufactured From M2 Grade HSS Steel, It Provides Durable Cutting Performance For Metal Drilling Applications, While The Transverse Hole Supports Burr Extraction And The 3 Flat Shank Helps Prevent Slipping In The Chuck.
Cone CutterThis Cone Cutter Is Designed For Drilling, Enlarging And De-Burring Holes In Thin Sheet Metal Up To 2mm Thickness. Manufactured From M2 Grade HSS Steel, It Provides Durable Cutting Performance For Electrical Installation, Fabrication And Maintenance Work. The 3 Flat Shank Helps Prevent Slipping In The Chuck For Stable, Controlled Use With Compatible Power Drills.
Roll Forged Jobber Drills Set - HSSThis HSS Steel Roll Forged Jobber Drill Set Is Designed For Accurate Drilling In Non-Alloy Materials, Including General Metalwork, Plastics And Wood. The 135° Split Point Helps Reduce Bit Drift And Supports Faster Penetration, Making The Set Suitable For Trade, Workshop And Maintenance Use With Standard Compatible Drill Chucks.
Ground Jobber Drill Bit SetThis Ground Jobber Drill Bit Set Is Manufactured From High Grade M2 HSS Steel For Consistent Drilling In Non Alloy Metals And General Engineering Materials. Fully Ground From Solid Stock For Dimensional Accuracy, It Is Made To DIN 338 With A 135° Split Point To Improve Centring, Reduce Wandering And Support Rapid, Clean Hole Formation In Professional Workshop And Site Applications.
Ground Jobber Drills Set - Cobalt M35This Ground Jobber Drills Set Is Manufactured From M35 Alloyed HSS Steel With 5% Cobalt For Drilling Stainless Steel And Other Alloy Materials. Ground Flutes Support Accurate Hole Formation, While The 135° Split Point Reduces Bit Drift And Improves Penetration In Metalworking, Fabrication, Maintenance And Installation Applications.
Cobalt Jobber Drill Bit SetThis Cobalt Jobber Drill Bit Set Is Manufactured From M35 Alloyed HSS Steel With 5% Cobalt For Drilling Stainless Steel And Tough Alloy Materials. Fully Ground From Solid Material To DIN338, Each Bit Provides Dimensional Accuracy, High Heat Resistance And A 135° Split Point For Cleaner Starts In Professional Metal Drilling Applications.
Ground Stub Drills - HSS M2These HSS M2 Ground Stub Drills Are Manufactured From High Grade M2 Tool Steel And Fully Ground From Solid Material For Dimensional Accuracy. Built To DIN 1897, The Short Stub Format Improves Rigidity And Reduces Deflection, Making Them Suitable For Rapid, Consistent Drilling In Non Alloy Metals, Sheet Steel And General Engineering Applications.
HSS-M Blacksmith Drill BitManufactured From M2 Grade HSS Steel With A Black Oxide Coating, This HSS-M Blacksmith Drill Bit Provides Consistent Drilling Performance In Sheet Metal And Other Non-Alloy Materials. The 118° Split Point Helps Prevent Bit Drift, While The Milled Flute Supports Accurate Hole Formation. A 12.5mm Shank Is Suitable For Use In A 1/2 Inch Chuck.
TIMCO has supplied the UK trade since 1972 growing from a family screw importer into one of Britain's biggest independent suppliers of fixings power tool accessories and building essentials. Discover the full collection at Fixings2Go where TIMCO anchors more shelves than any other supplier we stock. Trade professionals specify it because it delivers real engineering at a price that respects the day rate and DIY users get the same product the professionals fit.
Why Choose TIMCO?
Few brands cover as much of the job as TIMCO. The range at Fixings2Go runs from the C2 screw family and FirmaHold collated nails through the full nail pattern book masonry fixings driver bits and jobber drills to door and gate hardware hose clips and hi-vis workwear. One trusted name one consistent standard across thousands of lines.
Engineered for the Day Rate
TIMCO fixings are designed to save time on the tool. C2 screws pair twin cut points with dual angle threads and ribs under the head so they start fast drive smoothly and countersink cleanly without splitting. Performance that matches premium rivals at a working price.
One Brand Across the Whole Job
First fix to final furniture the range holds together. Frame the stud wall with FirmaHold hang the door on TIMCO hardware fit the letter plate numerals and hooks then drive it all with TIMCO S2 bits. Fewer brands on the van means fewer surprises on site.
Trade Packaging That Makes Sense
Boxes tubs and industry packs sized for real jobs not blister packs. Nails run from handy packs to bulk cartons screws come in trade boxes and driver bits in mixed sets so you buy at the quantity the work demands.
Types of TIMCO Products
Our TIMCO range spans the trades. These are the main families you will find in this collection.
TIMCO Screws
The C2 family from Strong-Fix to Deck-Fix plus Classic Multi Purpose and Solo woodscrews. Sharp starting smooth driving screws for timber decking and general fixing in every common gauge and length.
TIMCO Nails
The full pattern book including round wire lost head clout annular ringshank square twist and slab nails plus FirmaHold collated nails for first fix nailers.
TIMCO Fixings and Fasteners
Masonry and framing anchors timber hangers drive screws rivets staples washers and hose clips. The site consumables that hold the structural and second fix work together.
TIMCO Door and Gate Hardware
One of the deepest sections of the range. Pull handles letter plates door knockers numerals latches padbolts sash fasteners door stops robe hooks and gate furniture in traditional and contemporary finishes.
TIMCO Tools and Driver Bits
Ground jobber drills in singles and sets S2 steel driver bits impact rated magnetic socket drivers and mixed bit sets built to survive impact drivers.
TIMCO Workwear and PPE
Hi-vis clothing and site safety essentials that carry the same trade value as the fixings shelves.
Popular TIMCO Ranges Compared
The named ranges below are the ones tradespeople ask for. Use the table to match the range to the job.
Range
Best For
Key Features
C2 Strong-Fix
Structural timber and heavy carpentry
Twin cut point dual angle thread ribs under head
C2 Deck-Fix
Decking and exterior boards
Weather resistant coating reduced splitting
Classic Multi Purpose
Everyday fixing in timber and board
Sharp point smooth drive clean countersink
Solo Woodscrews
Volume general purpose work
Dependable woodscrew value in trade boxes
FirmaHold
First fix nailers
Collated framing nails for gas and cordless tools
S2 Driver Bits and Ground Jobber Drills
Drilling and driving
Impact ready S2 steel precision ground HSS drills
Frequently Asked Questions
Are TIMCO screws good quality?
Yes TIMCO screws are trade specified across the UK. Ranges like the C2 Strong-Fix carry twin cut points dual angle threads and ribs under the head so they drive faster and hold harder than standard screws at a working price.
What is the difference between C2 Strong-Fix and Classic Multi Purpose screws?
Classic Multi Purpose is the everyday all rounder for timber and board. C2 Strong-Fix adds the full C2 performance package for structural and heavy section timber where drive speed and clamping force matter most.
Is TIMCO a good make?
TIMCO has been a family run British supplier since 1972 and its products are stocked by independent merchants across the country. The brand's reputation rests on trade quality at sensible prices which is exactly why it anchors our fixings shelves.
What does TIMCO make besides screws?
Nails collated nails anchors driver bits drills door and gate hardware hose clips workwear and site consumables. The breadth is the point one trusted brand across the whole van.
Do TIMCO FirmaHold nails fit my nail gun?
FirmaHold collated nails are made for popular gas and cordless first fix framing nailers. Check your tool's angle and gauge against the pack and the range covers the common site standards.
Why shop for TIMCO at Fixings2Go?
We hold one of the deepest TIMCO ranges online covering screws nails fixings hardware tools and PPE all at trade prices with fast UK delivery.
Need More Help Choosing the Right TIMCO Products?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
