Machine Screws
-
Timco Roofing Bolts & Square Nuts, Zinc Steel
Roofing Bolts & Square Nuts - ZincThese Roofing Bolts With Square Nuts Are Manufactured From Carbon Steel With A Zinc Finish For General Purpose Fixing. The Large Flat Head Spreads Load Across The Fastened Surface, Improving Clamp Hold On Thin Sheet Metal, Plastic And Timber. Suitable For Roofing, Fabrication, Repair Work And Engineering Fixings Where A Wide Bearing Head And Secure Square Nut Are Required.
£0.86 - £6.49 Ex. VAT £1.03 - £7.79 In. VAT
-
Timco Roofing Bolts With Square Nuts, Zinc Steel
Roofing Bolts With Square Nuts - ZincThese TIMCO Roofing Bolts With Square Nuts Are Manufactured From Zinc Finished Carbon Steel For General Purpose Fixing And Corrosion Resistance In Indoor Or Sheltered Applications. The Large Flat Head Spreads Load Across The Fixing, Improving Clamp Performance On Thin Sheet Metal, Plastic And Wood. Supplied With Square Nuts For Secure Assembly In Roofing, Fabrication And Maintenance Work.
£3.94 - £15.17 Ex. VAT £4.73 - £18.20 In. VAT
-
Timco Machine Screws Steel, Zinc, Lime
Machine Screws - Countersunk - PH - Metric Thread - B Point - ZincDesigned For Window Fabrication And PVCu Frame Applications, This Countersunk PH Machine Screw Secures Handles Or Espagnolettes Into Pre-Defined Holes. The Metric Thread And B Point Support Accurate Engagement In Reinforced Or Unreinforced Frames, While Zinc Plated Carbon Steel Provides A Durable, Corrosion Resistant Finish For Interior Hardware Fixing.
£8.06 - £10.69 Ex. VAT £9.67 - £12.83 In. VAT
-
Timco Machine Screws Steel, Clear, Zinc
Machine Screws - PZ - Countersunk & Hex Nuts - ZincThese PZ Countersunk Machine Screws With Hex Full Nuts Are Designed For General Light Duty Bolting Where A Flush Finish Is Required. Manufactured From Carbon Steel With A Zinc & Clear Cr3 Finish, They Provide Practical Corrosion Resistance For Indoor Mechanical Fixing, Metal Construction, Brackets, Panels, And Component Assembly Using A Standard Metric Thread.
£0.86 Ex. VAT £1.03 In. VAT
-
Timco Metric Threaded Machine Screws Steel, Clear, Zinc, Lime
Metric Threaded Machine Screws - PZ - Countersunk - ZincThese Metric Threaded Machine Screws Feature A PZ Drive And Countersunk Head For Flush Installation In Pre Drilled And Threaded Holes. Manufactured From Carbon Steel With A Zinc And Clear Cr3 Finish, They Provide Reliable Fixing For Metalwork, Brackets, Components And General Assembly Where A Metric Thread Is Required.
£0.73 - £3.43 Ex. VAT £0.88 - £4.12 In. VAT
-
Timco Metric Threaded Machine Screws Steel, Clear, Zinc, Lime
Metric Threaded Machine Screws - PZ - Pan Head - ZincThese Metric Threaded Machine Screws Are Designed For Use In Pre-Drilled, Tapped Or Threaded Holes Across Electrical Enclosures, Machinery, Brackets And General Metalwork. The Pan Head Provides A Broad Bearing Surface For Improved Clamping, While Zinc & Clear Cr3 Carbon Steel Supports Corrosion Resistance For Indoor Fixing Applications.
£1.00 - £4.95 Ex. VAT £1.20 - £5.94 In. VAT
-
Timco Machine Screws Steel, Clear, Zinc
Machine Screws - PZ - Pan & Hex Nuts - ZincThese TIMCO machine screws combine a pan head with a supplied full hex nut for light duty bolting where a broad bearing surface improves clamping. Manufactured from carbon steel with a zinc and clear Cr3 finish, they use a standard metric thread and PZ drive, suitable for fixing metal components, brackets, plates and general mechanical assemblies.
£0.86 Ex. VAT £1.03 In. VAT
-
Timco Set Screws, Grade 8.8, Zinc Steel, Clear
Set Screws - Grade 8.8 - ZincA Fully Threaded Grade 8.8 Carbon Steel Set Screw Designed For High Tensile Fastening In Machinery, Brackets, Frames, And General Engineering Assemblies. The Zinc And Clear Cr3 Finish Provides Corrosion Resistance For Indoor And Protected Applications, While The Full Thread Allows Consistent Clamping Across A Wide Range Of Fixing Depths. Nuts Are Not Included.
£6.21 - £17.46 Ex. VAT £7.45 - £20.95 In. VAT
Machine Screws for Tapped Holes Fittings and Fixtures
Discover our full collection of Machine Screws at Fixings2Go. Part of our wider Engineering Fasteners collection machine screws carry a precise metric thread for driving into tapped holes captive nuts and threaded inserts. Electrical accessories door furniture brackets and appliance repairs all turn on these small workhorses.
TIMCO metric threaded machine screws cover M4 M5 and M6 in lengths from 8mm to 50mm in clear zinc with 100 piece boxes 500 piece trade packs and small TIMpacs for single jobs. Roofing bolts with square nuts add the mushroom headed variant from M5 to M8 in 8mm to 80mm the classic fixing for sheet panels gutters and brackets where the wide head spreads load.
Frequently Asked Questions
What are M4 machine screws used for?
Electrical socket and switch fixing is the big one as UK back boxes take M3.5 and M4 threads with M4 and M5 also covering handles hinges and light fittings into tapped holes.
What is a roofing bolt?
A machine screw with a large domed mushroom head and square nut. The head spreads clamping force across soft or thin sheet and the square nut wedges against the material so it tightens single handed.
Why shop for Machine Screws at Fixings2Go?
We stock TIMCO machine screws and roofing bolts from handy packs to 500 piece boxes at trade prices with fast UK delivery.
Need More Help Choosing the Right Machine Screws?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
Best Sellers
-
£0.69 Ex. VAT £0.83 In. VAT
-
£1.07 - £40.55 Ex. VAT £1.28 - £48.66 In. VAT
-
£1.94 - £3.32 Ex. VAT £2.33 - £3.98 In. VAT
-
£0.87 - £1.38 Ex. VAT £1.04 - £1.65 In. VAT
-
£0.34 Ex. VAT £0.41 In. VAT
-
£0.73 Ex. VAT £0.88 In. VAT
-
£9.40 Ex. VAT £11.28 In. VAT
-
£3.58 - £32.95 Ex. VAT £4.29 - £39.54 In. VAT
