Milwaukee winter demolition gloves keep heavy site work moving when the temperature drops. A dual acrylic liner holds warmth in while a water and windproof palm layer shuts the weather out, and padded palms and fingertips take the sting out of handling materials in the cold. The index knuckle carries SMARTSWIPE material for touchscreen use, and the gloves are certified to EN388:2016 (2122A) for mechanical protection plus EN511 (14X) for cold resistance.
Five sizes run from 7/S through 8/M and 9/L up to 10/XL and 11/XXL, so the whole crew can be kitted out for winter. Order at trade prices with fast UK delivery.
Milwaukee winter cut-resistant gloves are insulated for cold weather site work, keeping hands warm without losing the control needed for tools and small components. Every version pairs winter insulation with certified protection, carrying both an EN388:2016 cut rating and an EN511 cold rating, so one glove covers warmth, grip and cut resistance through the colder months.
Three levels cover most winter jobs: Cut A (EN388 1141A, EN511 01X) uses a nylon build with a warm dual liner that keeps dexterity high for small parts, Cut C (2442C, EN511 02X) adds a 3/4 double dipped latex coating for wet conditions, and Cut E (3X43E, EN511 X1X) combines a 13 gauge outer and 10 gauge inner acrylic liner with the same latex coating for the highest cut protection in the range. All three come in sizes 7/S to 11/XXL, at trade prices with fast UK delivery.
Milwaukee performance work gloves are the everyday pair for general handling, made from polyester with the comfort details that matter over a long shift. A breathable tri cot lining stops hands overheating, the terry cloth thumb handles sweat, and a SMARTSWIPE knuckle keeps you connected to phones and tablets on the move. The hook and loop wrist closure holds everything secure, with EN ISO 21420 and EN388:2016 (2121A) certification for mechanical protection.
Sizing covers 7/S, 8/M, 9/L, 10/XL and 11/XXL across the range. Grab your size at trade prices with fast UK delivery.
Milwaukee leather gloves are cut from top grain goatskin, a supple leather that breaks in quickly while shrugging off the wear of daily handling and site work. A reinforced palm boosts protection where tools and materials bite, the keystone thumb keeps the glove comfortable through a full day of gripping, and Smartswipe means touchscreens still respond without the glove coming off. Certification covers EN ISO 21420 and EN388:2016 (2122X) for dependable cut resistance.
Five sizes are available, starting at 7/S and stepping up through 8/M, 9/L and 10/XL to 11/XXL. Order the size you need at trade prices with fast UK delivery.
Milwaukee Impact Pro cut-resistant gloves add shock absorbing protection across the back of the hand and fingers, for jobs where knocks and pinch points are as much of a risk as sharp edges. The reinforced nitrile coating keeps its grip on oily and low temperature surfaces and adds durability between thumb and fingers, SMARTSWIPE palm and fingertips support touchscreen use, and both versions carry EN 407 alongside an impact rated EN388:2016 cut certification.
Two protection levels are offered: the Cut C glove (EN388 4343CP) in sizes 7/S and 9/L for trade and workshop handling, and the Cut E glove (4X43EP) in sizes 7/S, 10/XL and 11/XXL for the sharpest materials in construction, engineering and maintenance. Pick the rating for the risk and order at trade prices with fast UK delivery.
Milwaukee hybrid leather gloves pair the two things you want when shifting heavy materials, a tough leather palm where the wear happens and a synthetic back that keeps the glove flexible and breathable. Extra reinforcement across the palm adds comfort and protection during repeated lifting and carrying, and Smartswipe compatibility lets you check a phone without taking the glove off. Each pair is certified to EN ISO 21420 and EN388:2016 (2122X) for dependable hand protection.
The range runs across five sizes from 7/S up to 11/XXL, with 8/M, 9/L and 10/XL in between. Choose your size and order at trade prices with fast UK delivery.
Milwaukee winter cut-resistant gloves in packs of 12 keep a whole crew warm through the cold months without a mid week trip back to the counter. Each pair combines winter insulation with certified protection to an EN388:2016 cut rating and an EN511 cold rating, so one box sorts warmth, grip and cut resistance for site, warehouse and maintenance teams.
Choose the level to match the work: the Cut A packs (EN388 1141A, EN511 01X) use a nylon dual liner build with high dexterity for small parts, the Cut C packs (2442C, EN511 02X) carry a 3/4 double dipped latex coating for wet, cold conditions, and the Cut E pack (3X43E, EN511 X1X) tops the range with a dual acrylic liner and the same water resistant latex dip. Sizes run from 7/S to 11/XXL across the range, each supplied as a 12 piece pack, and buying by the dozen at trade prices with fast UK delivery keeps the whole team stocked.
Milwaukee general work gloves in a 12 piece pack keep a whole crew, or one busy pair of hands, supplied for weeks of contracting, assembly, carpentry, material handling and remodelling work. Each glove is a lightweight polyester knit with a polyurethane dipped palm, giving the grip and dexterity needed for precise tasks without sacrificing comfort. Certification to EN ISO 21420, EN388:2016 (3121A) and UKCA covers dependable mechanical protection across the pack.
Each pack comes in a single size, with the range spanning 7/S, 8/M, 9/L, 10/XL and 11/XXL. Stock the van at trade prices with fast UK delivery.
Milwaukee Fully Dipped Cut A gloves in packs of 12 are the bulk buy for teams that get through gloves quickly in wet and oily work. The full hand double nitrile coating repels water and oils before they reach the liner, the foam nitrile palm keeps control on slippery parts, and a reinforced thumb stretches the working life of each pair. SMARTSWIPE fingertips handle touchscreens, with certification to EN388:2016 3121A and EN 407.
Where a single pair suits an individual kit, the 12 piece pack is sized for stores rooms and van stock, covering manufacturing, plumbing, automotive and transport crews from one order. Each size from 7/S to 11/XXL comes as its own pack of 12, so you can stock by hand size, at trade prices with fast UK delivery.
Milwaukee Cut A gloves in a pack of 12 give material handling and light construction crews a box of identical pairs, so worn gloves get swapped rather than nursed along. The nylon build carries a reinforced nitrile textured palm for grip and wear resistance, SMARTSWIPE palm and fingertips keep touchscreens usable with the gloves on, and every pair is certified to EN ISO 21420 and EN388:2016 4121A.
Buying by the dozen suits site boxes, warehouses and anyone issuing gloves to a team, with the same spec and dexterity in every pair. The packs come in sizes 8/M, 9/L, 10/XL and 11/XXL, one size per box, at trade prices with fast UK delivery.
Milwaukee Hi-Vis cut-resistant gloves put a fluorescent finish on a lightweight work glove, keeping hands visible in low light while you handle materials, strip wire or thread pipe. The polyurethane dipped palm gives grip and dexterity for fiddly tasks, and SMARTSWIPE palm and fingertips let you use a phone or tablet without taking them off. From Cut B upwards, reinforced nitrile between thumb and fingers adds durability where gloves wear first. Every level is certified to EN388:2016.
The range spans five cut levels, from Cut A (EN388 3121A) for carpentry, plumbing and general contracting, through Cut B (3242B) and Cut C (4X42C), up to Cut D (4X43D) for light metal stamping and Cut E (4X43E) for sheet metal, glass and ducting. Sizes run 7/S to 11/XXL, sold as single pairs, with the Cut A and Cut C levels also in packs of 12 for site supply, at trade prices with fast UK delivery.
Milwaukee Hi-Dex cut-resistant gloves are built for work where you cannot give up feel, pairing an 18 gauge liner with a thin dipped palm so dexterity and grip stay high while the cut protection does its job. Nitrile reinforcement between thumb and index finger takes the wear at the hardest working part of the glove, SMARTSWIPE fingertips keep touchscreens usable, and every level is certified to EN388:2016 and washable for a longer service life.
Four cut levels cover the risk on your site: Cut B (EN388 3242B) and Cut C (3342C) with a polyurethane dipped palm for precise handling and assembly, Cut D (3X42D) on an 18 gauge nylon liner, and High Cut F (4X42F) with a nitrile dipped palm for the sharpest materials. All four come in sizes 7/S to 11/XXL, at trade prices with fast UK delivery.
Milwaukee Fully Dipped Cut A gloves are coated over the whole hand with a double nitrile dip, so water and oil are repelled rather than soaking through to the liner. The foam nitrile palm holds its grip on oily surfaces, a reinforced thumb adds durability where wear starts, and SMARTSWIPE fingertips mean a phone or tablet works without pulling a glove off. Certification covers EN ISO 21420, EN388:2016 3121A cut protection and EN 407 X1XXX.
One spec runs right through the range, made for manufacturing, plumbing, automotive and facility management work where hands are in and out of wet and oily jobs all day. Sizes go from 7/S up to 11/XXL, so fitting different hands is straightforward, all at trade prices with fast UK delivery.
Milwaukee Flex work gloves are lightweight gloves made for jobs where feel matters, from handling small fixings to working with delicate materials. The soft synthetic leather palm grips without bulk, a breathable textile back keeps hands cool and flexible, and reinforced thumb and finger seams add durability where gloves usually fail first. SMARTSWIPE material on both the knuckle and the fingertips keeps phones and tablets usable, with EN ISO 21420 and EN388:2016 (2121A) certification covering mechanical protection.
Sizes span 7/S, 8/M, 9/L, 10/XL and 11/XXL, so there is a close fit for every hand on the job. All at trade prices with fast UK delivery.
Milwaukee DemoX work gloves are the impact rated choice for demolition and heavy site handling, tested to EN388:2016 (2121A) alongside EN ISO 21420. ARMORTEX reinforcement on the palms and fingertips resists wear from rough materials, TPR padding over the knuckles guards against impacts, and a terry cloth thumb gives you somewhere to wipe your brow. A breathable tri cot lining, SMARTSWIPE knuckle for touchscreen use and hook and loop closure round out a glove made for long days.
The full run of five sizes goes from 7/S to 11/XXL, taking in 8/M, 9/L and 10/XL along the way. Pick your fit and order at trade prices with fast UK delivery.
Milwaukee demolition gloves are built for the roughest handling jobs on site, with ARMORTEX reinforced palms and fingertips that stand up to abrasive rubble and sharp edges. TPR pads across the knuckles cushion knocks during strip out and clearance work, a breathable tri cot lining keeps hands comfortable through the shift, and the SMARTSWIPE knuckle means you can use a phone or tablet without pulling a glove off. Each pair carries CE Category 2, EN ISO 21420 and EN 388 (2121X) certification with a hook and loop closure for a snug wrist fit.
Three sizes cover the range, from 7/S through 8/M up to 11/XXL, so you can match the fit rather than make do. Order your size at trade prices with fast UK delivery.
Milwaukee cut-resistant gloves and sleeves give you hand and arm protection from one range, with every option certified to EN388:2016. The gloves use a textured nitrile palm or coating for grip on oily surfaces, plus SMARTSWIPE palm and fingertips so a touchscreen still works with them on. The sleeves are breathable 4 way stretch nylon with a thumb loop, non slip bicep band and stretch cuff, and carry UPF 50+ UV protection for outdoor work.
The gloves run from Cut A (EN388 4121A) for material handling and light construction, through Cut B (4242B) for handling sharper materials, up to Cut D (4X43D) with reinforced thumb and finger areas, all in sizes from 7/S to 11/XXL. The sleeves cover Cut C (2342C) and Cut E (3X42E) in 40cm and 45cm lengths. Pick the cut level to suit the job and order at trade prices with fast UK delivery.
Milwaukee chainsaw gloves carry EN ISO 11393 Class 1 (20 m/s) saw protection in both hands, built for forestry and arborist work where an ordinary work glove is not enough. Top grain goatskin leather gives a durable, water repellent outer, reinforced palm, thumb and fingertip areas resist wear at the contact points, and EN388:2016 2122A mechanical protection with EN ISO 21420 backs up the chainsaw rating. Smartswipe compatibility means a touchscreen still responds with the gloves on.
The same specification runs across the whole range, so choosing is simply a matter of fit, with sizes 8/M, 9/L, 10/XL and 11/XXL covering most of the crew. Order at trade prices with fast UK delivery.
Light Grip Gloves - Crinkle Latex Coated PolyesterThese Crinkle Latex Coated Polyester Gloves Provide Reliable Hand Protection For General Purpose Handling, Site Work, Maintenance And Assembly Tasks. The Crinkle Textured Coating Supports Strong Grip And Durability, While The Seamless Breathable Liner Helps Reduce Heat Build Up. Tight Fitting Construction Improves Dexterity, With Elasticated Knitted Cuffs For Secure, Comfortable Wear.
Medium Cut Gloves - PU Coated HPPE Fibre With Glass FibreDesigned For Construction, Manufacturing, Landscaping, Warehousing And Farming, These TIMCO Medium Cut Gloves Use A PU Coated HPPE And Glass Fibre Liner For Grip, Dexterity And Protection. They Provide Cut Protection Level B With A Seamless Breathable Back And Elasticated Knitted Cuffs For Secure, Comfortable Wear During Cut And Puncture Risk Tasks.
Secure Grip Gloves - Smooth Nitrile Foam Coated Polyester - Multi PackThese Secure Grip Gloves Use A Smooth Nitrile Foam Coating Over A Lightweight Polyester Liner To Provide Controlled Handling In Wet, Dry And Oily Conditions. The Seamless Construction, Breathable Back And Elasticated Knitted Cuff Support Comfort During Trade, Warehouse And Site Work, While Maintaining High Dexterity For Tool Use, Fixings And General Assembly. Supplied As A 12 Pair Multi Pack.
Secure Grip Gloves - Smooth Nitrile Foam Coated PolyesterThese TIMCO Secure Grip Gloves Use A Smooth Nitrile Foam Coating Over A Lightweight Polyester Liner To Provide Reliable Handling In Wet, Dry And Oily Conditions. The Seamless, Breathable Back Helps Reduce Heat Build Up, While Elasticated Knitted Cuffs Improve Fit And Comfort. Suitable For Assembly, Maintenance, Warehousing And General Site Work Where High Dexterity And Grip Are Required.
Toughlight Grip Gloves - Sandy Latex Coated Polyester - Multi PackDesigned For Handling, Assembly And Site Work, These TIMCO Toughlight Grip Gloves Use A Sandy Textured Latex Coating Over A Seamless Polyester Liner For Secure Grip And Flexibility. The Breathable Back, Ergonomic Fit And Elasticated Knitted Cuff Support Dexterity And Comfort During Extended Use. Supplied As A 12 Pair Multi Pack For Trade, Workshop And PPE Stock Replenishment.
Toughlight Grip Gloves - Sandy Latex Coated PolyesterDesigned For Workwear, PPE And General Handling Tasks, These Polyester Grip Gloves Use A Sandy Textured Latex Coating To Improve Anti-Slip Control On Dry Or Lightly Damp Surfaces. The Seamless Breathable Liner, Ergonomic Fit And Elasticated Knitted Cuffs Support Dexterity, Comfort And Secure Wear During Trade, Warehouse And Site Applications.
Discover our full collection of Gloves at Fixings2Go. Part of our wider PPE collection hands take more punishment than any other part of the body on site. This TIMCO and Deligo range matches the glove to the hazard so protection never costs dexterity it does not have to.
Grip duties run from light secure durable and toughlight grip gloves to warm waterproof and aqua thermal versions for winter. Cut protection covers TIMCO medium high and impact cut gloves plus Deligo cut resistant PU gloves in three sizes. Nitrile and diamond textured disposable nitriles handle oils and mess PVC gloves and gauntlets take on chemicals and Deligo Canadian rigger gloves cover heavy handling. Eco options keep bulk buying affordable.
Frequently Asked Questions
What glove cut level do I need?
Match the level to the sharpest material you handle. Medium cut suits general site work while high and impact cut gloves cover sheet metal glass and demolition.
Why choose nitrile disposable gloves over latex?
Nitrile resists oils and punctures better and sidesteps latex allergies. The diamond textured version adds grip when everything is covered in product.
Why shop for Gloves at Fixings2Go?
We stock TIMCO and Deligo gloves for every hazard at trade prices with fast UK delivery.
Need More Help Choosing the Right Gloves?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
