VESF Vinylester SF Chemical ResinVESF Vinylester Styrene Free Chemical Resin Is A Rapid Curing, Two Component Resin For Safety Critical Fixing In Solid And Hollow Masonry. ETA Approved And Fire Rated, It Is Suitable For Enclosed, Damp Or Wet Areas, With Low Odour, Low Extrusion Force And A Mixing Nozzle Included For Controlled Application.
Skeleton GunA 48mm Skeleton Gun For Dispensing Sealants, Caulk And Adhesives In Trade And DIY Applications. Built With 2.3mm Strengthened Side Plates And A 6mm Gripper Plate, It Provides Controlled Cartridge Pressure With A 7:1 Trigger Ratio. The Riveted Front Cap, Integrated Cleaning Pin, Hook End And 380ml Cartridge Capacity Support Practical Site Use.
PESF Styrene Free Chemical ResinTIMCO PESF Is A Styrene Free Polyester Resin For Day To Day Non Safety Critical Fixing In Solid And Hollow Masonry. The Two Component Formula Mixes In The Nozzle For Clean Application, With Low Extrusion Force, Reduced Leakage And Less Waste. ETA Approved And Low Odour, It Is Suitable For Enclosed Or Poorly Ventilated Areas, With Fire Rated Performance And Close Edge Or Axial Spacing.
PE Chemical ResinTIMCO PE Chemical Resin Is A Two Component Polyester Resin Supplied Ready To Use With A Mixing Nozzle. Designed For Solid And Hollow Masonry, It Is Suitable For Day To Day Non Safety Critical Fixing In Well Ventilated Areas. The Low Extrusion Force Formula Supports Controlled Application, Reduced Wastage, No Leakage, And Closer Edge And Axial Spacing.
Internal D3 Wood AdhesiveTIMCO Internal D3 Wood Adhesive Is A Resin Based Wood Glue For General Woodworking, Joinery, Furniture Assembly And DIY Repairs. It Provides A High Strength, Impact Resistant Bond For Internal Timber Applications And Short Term Damp Or Humid Areas Such As Kitchens, Bathrooms And Covered External Use. Fast Cure Performance Gives An Initial Set In 10 Minutes, With Suitability For Load Bearing Work To BS 14256.
Nozzles For Chemical ResinsTIMCO Nozzles For Chemical Resins Are Spare Mixer Nozzles Designed For Controlled Resin Application In Masonry And Cavity Fixing Work. The Unique Mixing Design Supports Consistent Blending, While Low Extrusion Force Helps Improve Handling On Smaller Jobs. Suitable For 300ml And 410ml Resin Cartridges, They Allow Part Used Resin To Be Stored And Reused For Later Fixing Applications.
Blow-Out PumpThis TIMCO Blow-Out Pump Is Designed For Hole Debris Removal Before Resin Injection Or Mechanical Anchor Installation. It Clears Dust And Loose Material From Drilled Masonry Holes, Helping Improve Bond Strength, Anchor Seating And Fixing Reliability. Suitable For Site, Trade And Maintenance Use, It Supports Correct Drill Hole Preparation Where Safe Fixing Performance Depends On A Clean Substrate.
Professional Resin GunThe TIMCO Professional Resin Gun Is A Heavy Duty, Co Axial Applicator For Accurate Dispensing Of 410ml Chemical Resin Cartridges In Masonry And Fixing Work. Its 64mm Cartridge Capacity, Twin 5mm Gripper Plates And Four Point Plunger Contact Support Controlled Application, While The 25:1 Trigger Ratio And Non Drip Mechanism Help Reduce Waste On Site.
Professional Sealant GunThe TIMCO Professional Sealant Gun Is A 48mm Heavy Duty Applicator For Sealants, Caulks And Resin Cartridges. Its Swivel Action Barrel Supports Controlled Application In Tight Corners, While The Patented Non Drip Mechanism Helps Reduce Waste. A 12:1 Trigger Ratio, Hook End For Storage And Approximate 820g Weight Make It Suitable For Trade And DIY Use.
Metoset Concrete Repair Resin - SandA Two Component Concrete Repair Resin In Sand For Filling Cracks, Sealing Joints And Repairing Masonry, Concrete, Brick And Stone Surfaces. Supplied Ready To Use In A ChubSeal Cartridge Design, It Provides Fast Curing, Weatherproof Repairs With A Styrene Free Formulation And Bond Strength Stronger Than Cured Concrete For Trade And DIY Building Maintenance.
Metoset Concrete Repair Resin - GreyMetoset Concrete Repair Resin In Grey Is A Two Component Masonry Repair Compound For Cracks, Joint Sealing And Surface Repairs On Concrete, Brick And Stone. Supplied In A ChubSeal Cartridge, It Is Ready To Use, Styrene Free And Weatherproof, With A Fast Curing Formula Designed To Set Stronger Than Cured Concrete For Durable Internal Or External Repairs.
Internal & External D4 Premium Wood AdhesiveThis Solvent Free Hybrid Resin Wood Adhesive Is Designed For Internal And External Joinery, Woodworking And Timber Construction. It Provides A D4 Waterproof Bond With High Strength, Impact Resistance And Temperature Resistance, Making It Suitable For Water Immersed Applications. Fast Curing Performance Gives An Initial Set In 10 Minutes And It Conforms To DIN EN 14257.
Shop Construction Chemicals for Resin Fixing and Repair at Fixings2Go
Discover our collection of Construction Chemicals at Fixings2Go. Part of our wider Adhesives & Building Chemicals range these two component resins and compounds anchor repair and reinforce masonry and concrete. Whether you are resin fixing studs into hollow block or repairing cracked concrete our Construction Chemicals combine ETA approved TIMCO chemical resins with Metolux repair systems plus the guns nozzles and pumps that make application clean and accurate. Browse today and find exactly what your next fix needs.
Types of Construction Chemicals
Our Construction Chemicals come in practical styles to match different fixings and repairs. Each range offers unique benefits so you can pick the perfect match. Click the links below to explore the full selection in each subcategory.
VESF vinylester styrene free resin that is ETA approved and fire rated for safety critical fixing plus PESF styrene free and PE polyester resins for day to day anchoring in solid and hollow masonry with spare mixing nozzles blow out pumps and professional resin guns.
PVA bond and premium SBR bond that prime seal and improve water resistance in concrete mortar render and floor screeds plus powder fillers and Metolux repair compounds.
Frequently Asked Questions
What is chemical resin fixing?
Chemical resin bonds threaded studs and anchors into masonry without expansion stress. Inject the two component resin into a clean drilled hole insert the stud and once cured the fixing carries high loads even close to edges and in hollow block.
What is the difference between VESF and PESF resin?
VESF vinylester resin is ETA approved and fire rated for safety critical structural fixing while PESF and PE polyester resins handle day to day non safety critical anchoring. All three mix in the nozzle for clean accurate application.
Why do I need a blow out pump?
Dust left in the drilled hole is the main cause of resin fixing failure. The blow out pump clears debris before injection so the resin bonds to sound masonry which dramatically improves the strength of the finished anchor.
What is SBR bond used for?
SBR bond is a latex based primer and admixture that improves water resistance and adhesion in concrete mortar render and screeds. Brush it on as a bonding coat or mix it in to strengthen patching and levelling compounds.
Why shop for Construction Chemicals at Fixings2Go?
We stock quality TIMCO and Metolux construction chemistry from ETA approved resins to bonding agents repair compounds and professional application tools. Our focus on performance features and fast UK delivery helps you anchor and repair efficiently every time.
Need More Help Choosing the Right Construction Chemicals?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
