Metal Construction Screws
-
Timco Metal Construction Fibre Cement Board To Timber Screws Silver, Steel, Lime, Ash
Metal Construction Fibre Cement Board To Timber Screws - Hex - BAZ Washer - Slash Point - Exterior - Silver OrganicDesigned For Securing Fibre Cement Profile Sheets To Timber, These Hex Head Screws Use A Slash Point For Fast Penetration And Wings To Ream An Expansion Hole In The Sheet. The Case And Core Hardened Carbon Steel Body Has An Exterior Silver Organic Coating Tested To 500 Hours Salt Spray, With A Heavy Duty EPDM And Stainless Steel BAZ Washer For A Watertight Seal On Roofing Applications.
£18.74 Ex. VAT £22.49 In. VAT
-
Timco Metal Construction Stitching Screws Stainless Steel, Silver, Lime, Red, Ash
Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Bi-Metal - Exterior - Silver OrganicDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, This Exterior Screw Suits Sheet Steel Applications Up To 1.6mm. The Self-Drilling Carbon Steel Tip Is Fused To An A2-304 Stainless Steel Body, With A Tapered Shank, Washered Hex Head, EPDM Washer, And Silver Organic Finish For Roofing And Construction Use.
£27.32 Ex. VAT £32.78 In. VAT
-
Timco Drywall Construction Metal Stud Cement Board Screws Silver, Steel, Lime
Drywall Construction Metal Stud Cement Board Screws - PH - Countersunk Wafer - Self-Drilling - Exterior - Silver OrganicTIMCO Drywall Cement Board Screws Are Designed For Fixing Cement Board To Steel Dry Lining Frames Up To 3.0mm. The Countersunk Wafer Head With Underside Ribs Helps Achieve A Flush Finish, While The Self-Drilling Point And Self-Tapping Thread Support Fast Installation Into Light Section Steel. Carbon Steel Construction With Exterior Plus Silver Organic Coating Provides Enhanced Corrosion Resistance For Damp Or Corrosive Environments And A1 Fire Classification.
£3.89 - £4.67 Ex. VAT £4.67 - £5.60 In. VAT
-
Timco Metal Construction Composite Panel Screws Stainless Steel, Silver, Lime, Ash
Metal Construction Composite Panel Screws - Hex - EPDM Washer - Self-Drilling - Bi-Metal - Exterior - Silver OrganicDesigned To Fix Composite Panels To Light Section Steel Up To 5mm, These TIMCO Hex Head Screws Feature A Self-Drilling Carbon Steel Tip Fused To An A2-304 Stainless Steel Body. The Split Thread Supports Secure Clamping, While The EPDM Washer Helps Seal Against Weather In Exterior Roofing And Cladding Applications. Silver Organic Finish Provides A Clean, Corrosion Resistant Fixing.
£64.50 Ex. VAT £77.40 In. VAT
-
Timco Metal Construction Composite Panel Screws Silver, Steel, Lime, Ash
Metal Construction Composite Panel Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicDesigned For Fixing Composite Panels To Light Section Steel Up To 5mm, These TIMCO Self-Drilling Screws Feature A Hex Head, Split Thread And EPDM Washer For Secure, Weather Resistant Installation. Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating Provides Durable Corrosion Resistance Tested To 500 Hours Salt Spray.
£10.83 - £22.14 Ex. VAT £13.00 - £26.57 In. VAT
-
Timco Metal Construction Fibre Cement Board To Light Section Screws Silver, Steel, Lime, Ash
Metal Construction Fibre Cement Board To Light Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicThese TIMCO Fibre Cement Board Screws Are Designed For Securing Fibre Cement Profile Sheets, Including Big 6 Roofing Sheets, To Light Section Steel Up To 5mm. The Self-Drilling Hex Head Fixing Uses Wings To Ream An Enlarged Hole For Sheet Expansion, With A Heavy Duty EPDM And Stainless Steel BAZ Washer For A Water-Tight Seal. Silver Organic Exterior Coating Provides Corrosion Resistance Tested To 500 Hours Salt Spray.
£16.27 - £19.89 Ex. VAT £19.52 - £23.87 In. VAT
-
Timco Metal Construction Heavy Section Screws Silver, Steel, Lime, Ash
Metal Construction Heavy Section Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicThese TIMCO Metal Construction Heavy Section Screws Are Designed For Fixing Metal To Heavy Section Steel Up To 12mm Without Pre-Drilling. The Hex Head Provides Positive Drive Control, While The EPDM Washer Helps Seal The Fixing Point. Made From Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating, They Offer Durable Corrosion Resistance Tested To 500 Hours Salt Spray.
£6.87 - £31.87 Ex. VAT £8.24 - £38.24 In. VAT
-
Timco Metal Construction Heavy Section Screws Silver, Steel, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicDesigned For Attaching Metal To Heavy Section Steel Without Pre-Drilling, These Hex Head Self-Drilling Screws Suit Roofing, Cladding, And General Construction Fixing. Manufactured From Case And Core Hardened Carbon Steel With A Silver Organic Exterior Finish, They Provide Durable Corrosion Resistance And Are Suitable For Steel Sections Up To 12 Mm.
£5.19 - £16.49 Ex. VAT £6.23 - £19.79 In. VAT
-
Timco Metal Construction Heavy Section Screws Steel, Zinc, Lime, Ash
Metal Construction Heavy Section Screws - Hex - EPDM Washer - Self-Drilling - ZincDesigned For Attaching Metal To Heavy Section Steel Without Pre-Drilling, These Hex Head Self-Drilling Screws Suit Roofing, Cladding, And Construction Fixing Applications. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Provide Reliable Penetration Into Steel Up To 12mm Maximum Thickness, While The EPDM Washer Helps Seal The Fixing Point.
£3.89 - £11.81 Ex. VAT £4.67 - £14.17 In. VAT
-
Timco Hex Head Cover Caps, Metallic Silver Plastic, Ash
Hex Head Cover Caps - Metallic SilverTIMCO Hex Head Cover Caps Provide A Neat Finish For Roofing Screws And Metal Construction Fixings, Helping Screw Heads Blend With Coloured Panels. Made From Plastic With A Matt Metallic Silver Finish, They Are Suitable For Sheet Fixings, Caps And Washers In Roofing, Cladding And General Construction Applications.
£12.80 - £13.11 Ex. VAT £15.36 - £15.73 In. VAT
-
Timco Metal Construction Light Section Screws Silver, Steel, Lime, Ash
Metal Construction Light Section Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicHex Head Self-Drilling Screws For Fixing Roofing Sheets To Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With An EPDM Washer For Weather Sealing, They Suit Exterior Roofing And Construction Applications. The Silver Organic Exterior Finish Provides 500 Hours Salt-Spray Resistance And Is Rated For Steel Sections Up To 5.0mm.
£4.25 - £52.36 Ex. VAT £5.10 - £62.83 In. VAT
-
Timco Metal Construction Light Section Screws Steel, Zinc, Lime, Ash
Metal Construction Light Section Screws - Hex - EPDM Washer - Self-Drilling - ZincHex Head Self-Drilling Screws For Fixing Roofing Sheets To Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Are Suitable For Steel Sections Up To 5.0mm. The EPDM Washer Helps Form A Weather-Resistant Seal For Roofing And Cladding Applications.
£2.61 - £4.98 Ex. VAT £3.13 - £5.97 In. VAT
-
Timco Metal Construction Light Section Screws Silver, Steel, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicHex Head Self-Drilling Screws For Joining Roofing Sheets To Max. 5.0mm Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With An Exterior Silver Organic Finish, They Provide Durable Corrosion Protection Rated To 500 Hours Salt-Spray Resistance And Meet Fire Classification A1 For Roofing And Construction Applications.
£3.13 - £9.94 Ex. VAT £3.76 - £11.93 In. VAT
-
Timco Metal Construction Light Section Screws Stainless Steel, Steel, Silver, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - Bi-Metal - Exterior - Silver OrganicHex Head Self-Drilling Screws Designed For Joining Roofing Sheets To Light Section Steel Up To 5.0mm Without Pre-Drilling. The Bi-Metal Construction Combines An A2-304 Stainless Steel Body With A Hardened Carbon Steel Drill Tip, Providing Reliable Drilling Performance And Exterior Corrosion Resistance With A Silver Organic Finish.
£22.77 - £48.57 Ex. VAT £27.32 - £58.28 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Silver, Steel, Lime
Metal Construction Sheet & Framing Screws - PH - Low Profile Pan - Exterior - Silver OrganicDesigned For Light Duty Metal To Metal Fixing, These Low Profile Pan Head Screws Provide A Flush Finish In Sheet And Framing Applications. Made From Carbon Steel With A Silver Organic Exterior Finish, They Offer Over 500 Hours Salt Spray Resistance. A Large Head Improves Clamping, While The Coarse 60° Self-Tapping Thread And Phillips No.2 Recess Support Secure Driving And Strong Pull-Out Performance.
£7.18 Ex. VAT £8.62 In. VAT
-
Timco Metal Construction Heavy Section Screws Steel, Zinc, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - ZincTIMCO Metal Construction Heavy Section Screws Are Designed For Fixing Metal To Heavy Section Steel Without Pre-Drilling. The Hex Head Supports Secure Driving, While The Self-Drilling Tip Cuts Into Max. 12mm Steel. Made From Case And Core Hardened Carbon Steel With A Zinc Finish, They Suit Roofing, Cladding And Structural Metalwork Applications.
£4.43 - £10.19 Ex. VAT £5.31 - £12.23 In. VAT
-
Timco Metal Construction Heavy Section Screws Stainless Steel, Silver, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - Bi-Metal - Exterior - Silver OrganicDesigned For Attaching Metal To Heavy Section Steel Up To 12mm Without Pre-Drilling. The Hex Head Self-Drilling Screw Uses A Hardened Carbon Steel Drill Tip Fused To An A2-304 Stainless Steel Body, Providing Strength, Corrosion Resistance And Reliable Exterior Fixing For Roofing, Cladding And Construction Applications.
£28.45 - £32.62 Ex. VAT £34.14 - £39.14 In. VAT
-
Timco Metal Construction Light Section Screws Steel, Zinc, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - ZincHex Head Self-Drilling Screws Designed For Joining Roofing Sheets To Light Section Steel Up To 3.0mm Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Provide Reliable Fixing Performance For Roofing And Construction Applications. Suitable For Light Duty Section Steel, These Screws Feature A Hex Head For Positive Driver Engagement And Carry An A1 Fire Classification.
£10.73 - £17.07 Ex. VAT £12.88 - £20.48 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Steel, Zinc, Lime
Metal Construction Sheet & Framing Screws - PH - Wafer - Self-Drilling - ZincThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 3.0mm Without Pre-Drilling. The PH Wafer Head Provides A Low Profile Fixing, While The Self-Drilling Carbon Steel Body With Zinc Finish Supports Reliable Installation In Light Gauge Metal Framing. Fire Classification A1 For Suitable Construction Applications.
£6.35 - £11.23 Ex. VAT £7.62 - £13.48 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Steel, Zinc, Lime
Metal Construction Sheet & Framing Screws - PH - Wafer - Sharp Point - ZincTIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 0.6mm Without Pre-Drilling. The Wafer Head Provides A Low Profile Bearing Surface, While The PH Drive And Sharp Point Support Fast Installation Into Light Gauge Metal. Manufactured From Carbon Steel With A Zinc Finish, They Offer Practical Corrosion Resistance And A1 Fire Classification For Construction Use.
£8.33 Ex. VAT £10.00 In. VAT
-
Timco Metal Construction Sheet & Stud Screws Steel, Zinc, Lime
Metal Construction Sheet & Stud Screws - PH - Pan - Self-Drilling - ZincA Zinc Finished Carbon Steel Pan Head Screw For Light Duty Metal To Metal Fixing In Interior Dry Lining And Metal Framing Work. The Self Drilling Point Reduces The Need For Pilot Holes, While The Phillips Recess Supports Controlled Installation Into Sheet And Stud Profiles. Suitable For Standard Profile Framing, With Fire Classification A1.
£7.21 - £12.18 Ex. VAT £8.65 - £14.62 In. VAT
-
Timco Metal Construction Stitching Screws Steel, Zinc, Lime, Red, Ash
Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Self-Drilling - ZincDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, These TIMCO Screws Feature A Self-Drilling Point And Tapered Shank For Fast Installation Through Sheet Steel Up To 1.6mm. The Washered Hexagon Head Includes An EPDM Washer For A Secure Seal, With Zinc Finished Case And Core Hardened Carbon Steel Construction For Roofing And Cladding Applications.
£3.54 Ex. VAT £4.25 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Silver, Steel, Lime
Metal Construction Sheet & Framing Screws - PH - Low Profile Pancake - Exterior - Silver OrganicThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Medium Duty Metal To Metal Fixing Where A Flush Finish Is Required. The Low Profile Pancake Head Provides Increased Clamping On Thin Sheet Material, While The Phillips No.2 Recess Supports Positive Drive Control. Carbon Steel Construction, Coarse 60° Self Tapping Thread And Silver Organic Exterior Finish Provide Grip, Pull Out Resistance And Over 500 Hours Salt Spray Performance.
£10.47 - £12.64 Ex. VAT £12.56 - £15.17 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Silver, Steel, Lime
Metal Construction Sheet & Framing Screws - PH - Low Profile Wafer - Exterior - Silver OrganicThese TIMCO low profile wafer head screws are designed for light duty metal to metal fixing and thin sheet framing where a flush finish is required. Made from carbon steel with an Exterior Silver Organic Finish, they offer over 500 hours salt spray resistance. The large head improves clamping, while the coarse 60° self-tapping thread and Phillips No.2 Recess provide secure drive control and pull-out performance.
£3.73 Ex. VAT £4.48 In. VAT
You have seen 24 out of 50 products
Shop Metal Construction Screws for Steel Sheet and Framing at Fixings2Go
Discover our full collection of Metal Construction Screws at Fixings2Go. Part of our wider Screws range these fixings join metal to metal timber to steel and board to steel across roofing cladding and framing work. Whether you are a steel frame contractor or a DIY user building with light gauge sections our Metal Construction Screws combine self drilling points EPDM sealing washers and exterior coatings for fast weathertight results without pre drilling. Browse today and find exactly what your next steel job needs.
Types of Metal Construction Screws
Our Metal Construction Screws come in practical styles to match different steel thicknesses and fixtures. Each range offers unique benefits so you can pick the perfect match. Click the links below to explore the full selection in each subcategory.
Tek Screws
Hex head self drilling screws that cut their own hole and thread in one action. Light section designs handle steel up to 5mm while heavy section versions drill into structural steel up to 12mm.
Self Tapping Metal Screws
PZ countersunk and pan head designs in zinc and A2 stainless steel that thread into pre drilled holes. Ideal for stitching sheet metal fixing components and general fabrication plus handy mixed trays with three head types.
Stitching Screws
Sheet to sheet fixings with EPDM washers that join two metal sheets without pre drilling. Used on side laps flashings and drywall track systems.
Sheet to Steel Screws
Board and sheet fixings for steel frames including cement board screws dense board screws and galvanised EPDM washers that seal every fixing point.
Product Range and Feature Comparison
Compare the main Metal Construction Screw ranges in our collection to find the perfect match for your project:
Range |
Key Feature |
Popular Uses |
|---|---|---|
| Light Section Screws | Self drilling hex head EPDM washer steel up to 5mm | Roofing sheets to purlins and rails |
| Heavy Section Screws | Self drilling into structural steel up to 12mm zinc silver or bi metal stainless | Cladding rails and structural steelwork |
| Timber to Steel Screws | Countersunk wing tip designs collated options available | Timber battens to light and heavy sections |
| Composite Panel Screws | Long reach 82mm to 180mm EPDM washer | Insulated panels to light section steel |
| Sheet and Framing Screws | Low profile pan and wafer heads for flush finishes | Drywall track and light metal framing |
| Metal Tapping Screws | PZ drive zinc or A2 stainless for pre drilled holes | Fabrication maintenance and repair |
Frequently Asked Questions
What kind of screws do I need to go through metal?
Self drilling Metal Construction Screws drill and thread steel in one action with no pilot hole. Match the screw to the steel thickness with light section designs for up to 5mm and heavy section versions for structural steel up to 12mm. For thin pre drilled sheet use self tapping screws.
What type of screw do you use for metal framing?
Low profile pan and wafer head sheet and framing screws suit stud and track work because the flat head sits flush under boards. For stitching drywall track and ceiling track systems up to 3mm choose wafer head self drilling framing screws.
Can construction screws go through metal?
Ordinary timber construction screws cannot but our timber to steel wing tip screws can. The wing tip clears the timber then snaps off as the self drilling point enters steel letting you fix battens boards and timber sections directly onto steel up to 12mm.
Are Metal Construction Screws weathertight?
Yes when fitted with EPDM washers which compress a bonded rubber seal around each fixing point. Exterior silver organic coatings and bi metal stainless options add corrosion resistance while colour matched hex head cover caps finish the job neatly.
What makes TIMCO Metal Construction Screws stand out?
TIMCO Metal Construction Screws use case and core hardened steel for drilling performance with corrosion resistant finishes across zinc exterior silver and bi metal stainless. Clear naming by steel section thickness makes picking the right screw for the job straightforward.
Why shop for Metal Construction Screws at Fixings2Go?
We stock quality TIMCO metal fixings from tek screws and stitching screws to composite panel screws EPDM washers and cover caps. Our focus on performance features and fast UK delivery helps you complete every steel fixing job efficiently with the right screw every time.
Need More Help Choosing the Right Metal Construction Screws?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
Best Sellers
-
£0.69 Ex. VAT £0.83 In. VAT
-
£1.07 - £40.55 Ex. VAT £1.28 - £48.66 In. VAT
-
£1.94 - £3.32 Ex. VAT £2.33 - £3.98 In. VAT
-
£0.87 - £1.38 Ex. VAT £1.04 - £1.65 In. VAT
-
£0.34 Ex. VAT £0.41 In. VAT
-
£0.73 Ex. VAT £0.88 In. VAT
-
£9.40 Ex. VAT £11.28 In. VAT
-
£3.58 - £32.95 Ex. VAT £4.29 - £39.54 In. VAT
