Shop our most popular fixings, fasteners, tools and trade essentials all in one place. Our Best Sellers collection brings together customer favourites, trusted products and everyday must-haves for jobs of all sizes.
Whether you're stocking up for site work, tackling a repair, or ordering reliable supplies for your next project, these top-selling products are a great place to start.
HSS-M Blacksmith Drill BitManufactured From M2 Grade HSS Steel With A Black Oxide Coating, This HSS-M Blacksmith Drill Bit Provides Consistent Drilling Performance In Sheet Metal And Other Non-Alloy Materials. The 118° Split Point Helps Prevent Bit Drift, While The Milled Flute Supports Accurate Hole Formation. A 12.5mm Shank Is Suitable For Use In A 1/2 Inch Chuck.
Brad Point Wood BitThis Brad Point Wood Bit Is Designed For Accurate Small Diameter Drilling In Timber And Man-Made Boards. Manufactured From High Grade HSS Steel, It Provides Longer Service Life, Clean Hole Entry And Improved Cutting Control. The Fully Ground Construction Helps Reduce Friction, While Offering Up To 3x Heat Resistance Compared With Standard Carbon Steel Bits.
Long Flat Wood BitDesigned For Deep Drilling In Timber, Chipboard And Plasterboard, This TIMCO Long Flat Wood Bit Uses A 400 mm Length For Extended Reach. The Carbon Steel Body Features A Three Point Tip, Twin Cutting Edges And Recessed Ground Cutting Geometry For Cleaner Holes, Fast Chip Removal And Reliable Use With 3 Jaw Chucks Or Quarter Inch Quick Release Adaptors.
1/4" Flat Wood Bit Extension RodThis TIMCO Extension Rod Is Designed For Drilling In Restricted Access Areas With 1/4" Shank Flat Wood Bits And Spade Bits. Suitable For Wood Drilling Applications Where Extra Reach Is Required, It Provides A Secure Bit Connection And Is Supplied With An Allen Key For Fast Fitting And Adjustment.
Carpenter's Speed Auger & Flat Wood Bit KitA Compact Wood Drilling Kit For First Fix Pipe And Cable Runs, Designed For Drilling Between Joists And Studding Where Tool Length Is Restricted. Includes Three Speed Augers With Four Flutes For Rapid Chip Ejection And Cleaner Holes, Plus Two Flat Wood Bits For Larger Openings. Suitable For Carpenters, Electricians And Plumbers Using Standard Drills Or Impact Drivers.
TCT Hinge CutterThis TCT Hinge Cutter Is Designed For Cutting Accurate Blind Holes In MDF And Chipboard For Cantilever Door Hinges. Tungsten Carbide Cutting Edges Support Long Service Life, While The Bright And Black Finish Aids Identification. The 12.7 mm Shank Is Suitable For 13 mm Capacity Pillar Drills And 1/2 Inch Industrial Routers.
Wood Auger Bit - SDS ShankThis Wood Auger Bit Is Designed For Drilling Deep, Accurate Holes In Timber And Other Wood Based Materials. The SDS Shank Provides Secure Fitment In Compatible Power Tools, While The High Grade Carbon Steel Body Offers Reliable Strength For Regular Site Use. A Screw Point Helps Pull The Bit Through The Wood, With A Bright And Black Finish For Practical Durability.
Wood Auger Bit - Hex ShankA High Performance Wood Auger Bit Designed For Drilling Deep, Clean Holes In Timber, Joists, Beams And General Woodworking Applications. Manufactured From High Grade Carbon Steel, It Features A Screw Point For Accurate Starting And Efficient Pull Through, With A Hex Shank For Secure Grip In Compatible Drill Chucks. The Bright And Black Finish Supports Durability In Site And Workshop Use.
TCT Arrow Head Tile & Glass BitDesigned For Accurate Drilling In Glass, Ceramic And Tile, This TCT Arrow Head Bit Uses A Cross Ground Tungsten Carbide Tip For Clean, Controlled Starts. The Spear Shaped Profile And Shot Blast Finish Support Precise Rotary Drilling At Low RPM. Use Rotary Mode Only, With Water Lubrication Recommended When Drilling Glass.
Premium Diamond Tile & Glass BitDesigned For Clean, Accurate Drilling In Ceramics, Porcelain, Marble, Slate, Tile And Glass. Vacuum Brazed Technology Supports Higher Temperature Dry Drilling Through Hard Porcelain, While An Integrated Lubricant Aids Cooling And Extends Bit Life. The Non Slip Hex Shank Improves Grip In The Chuck, With A Laser Etched Diameter For Quick Size Identification. Suitable For Wet Or Dry Use.
Adaptor For Rebar Cutter HeadsThis TIMCO Adaptor Is Designed For Use With 22mm And Above Rebar Cutter Heads, Providing The Correct Connection For Rebar Cutting Applications In Reinforced Concrete Drilling. Suitable For Trade And Site Use, It Supports Accurate Cutter Head Fitment And Must Be Operated In Rotary Mode Only For Correct Performance.
Rebar Cutter - Head OnlyThe TIMCO Rebar Cutter Head Is Designed For Use With A Compatible Rebar Adaptor To Drill Through In-Situ Rebar During Reinforced Concrete Drilling. Supplied As A Head Only, It Provides A Practical Solution For Site Work Where Steel Reinforcement Is Encountered. Use In Rotary Mode Only To Protect The Cutter And Maintain Controlled Drilling Performance.
SDS Shank Rebar Cutters CompleteTIMCO SDS Shank Rebar Cutters Are Designed For Drilling Through In Situ Rebar When Working In Concrete With SDS Plus Machines Set To Rotary Mode Only. The Heavy Duty Tungsten Carbide Tip And High Temperature Brazed Construction Support Accurate Cutting, While Hammer Action Must Remain Switched Off To Prevent Tool Damage.
SDS Max Steels Slotting ToolDesigned For Use With SDS Max Shank Tools, This Slotting Tool Removes Mortar From Brickwork Before Repointing. The SDS Max Fitting Provides Secure Tool Engagement For Heavy Duty Masonry Preparation, While The Chisel Profile Supports Controlled Joint Clearance. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - Extra Wide ChiselDesigned For Use With SDS Max Shank Demolition Tools, This Extra Wide Chisel Is Suited To Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Supports Chipping And Chiselling Of Tile, Mortar, Old Plaster And Rendering, Providing Broad Surface Removal On Masonry Materials. Use In Hammer Only Mode, Not Rotary Mode, For Correct Operation.
SDS Max Steels - Wide ChiselThis Wide Chisel Is Designed For SDS Max Shank Breakers And Demolition Hammers, Providing Controlled Heavy Duty Breaking, Chipping And Chiselling In Concrete, Masonry, Brick And Stone. Suitable For Tile Removal, Mortar Raking, Old Plaster And Rendering Work. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - ChiselDesigned For Use With SDS Max Shank Breakers, This Chisel Supports Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Is Also Suitable For Chipping And Chiselling Tiles, Mortar, Old Plaster And Rendering, Providing A Practical Accessory For Building, Refurbishment And Demolition Work. For Non Rotary Use Only.
SDS Max Steels - PointThis SDS Max Point Steel Is Designed For Use With SDS Max Shank Tools For Heavy Duty Breaking, Chiselling And Demolition Work In Concrete And Masonry. The Pointed Tip Helps Concentrate Impact Force For Effective Material Breakout In Site, Trade And Maintenance Applications. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Hammer BitThe TIMCO SDS Max Hammer Bit Is Designed For Drilling Large Diameter Holes In Concrete, Stone And Masonry Using Rotary Hammers With An SDS Max Tool Holder. Its Narrow Angle 4 Cutter Head Helps Reduce Jamming For Smoother Drilling, While The Shot Peened Body Adds Strength And Durability. A Tungsten Carbide Tip Supports Reliable Cutting Performance In Demanding Masonry Applications.
SDS Plus Steels - GougeThis TIMCO SDS Plus Gouge Is Designed For Rotation Stop Hammers With The SDS Plus Tool Holder System. It Is Used To Remove Mortar From Brickwork Before Repointing, Providing Controlled Chiselling For Masonry Preparation. The Heat Treated Steel Construction And Shot Blast Finish Help Improve Durability And Rust Protection. Not For Use In Rotary Mode.
SDS Plus Steels - TileTIMCO SDS Plus Tile Steel For Use With Rotation Stop Hammers And SDS Plus Tool Holder Systems. The Angled Head Supports Controlled Removal Of Tiles, Plaster And Rendering, While Heat Treatment Improves Durability For Site Use. A Shot Blast Finish Helps Reduce Rust, And The Tool Must Not Be Used In Rotary Mode.
SDS Plus Steels - SpadeDesigned For Use With Rotation Stop Hammers And The SDS Plus Tool Holder System, This Spade Steel Is Suited To Breaking Concrete And Masonry, Plus Removing Plaster Or Rendering. Heat Treated Construction Supports Impact Durability, While The Shot Blast Finish Helps Improve Rust Protection. Not Suitable For Use In Rotary Mode.
SDS Plus Steels - ChiselThis SDS Plus Chisel Is Designed For Use With Rotation Stop Hammers Fitted With The SDS Plus Tool Holder System. Suitable For Breaking Concrete And Masonry, It Also Removes Plaster And Rendering During Renovation Or Site Preparation Work. The Steel Is Heat Treated For Durability, With A Shot Blast Finish For Rust Protection. Not For Use In Rotary Mode.
SDS Plus Steels - PointDesigned For Use In Rotation Stop Hammers With The SDS Plus Tool Holder System, This Point Steel Is Suitable For Breaking Up Concrete, Brickwork And Masonry During Chasing, Demolition And Preparation Work. The Heat Treated Construction Supports Durability, While The Shot Blast Finish Helps Improve Rust Protection. Use Only In Hammer Or Rotation Stop Mode, Not Rotary Mode.
