Sheet-to-Steel Screws

Metal Construction Fibre Cement Board To Timber Screws - Hex - BAZ Washer - Slash Point - Exterior - Silver OrganicDesigned For Securing Fibre Cement Profile Sheets To Timber, These Hex Head Screws Use A Slash Point For Fast Penetration And Wings To Ream An Expansion Hole In The Sheet. The Case And Core Hardened Carbon Steel Body Has An Exterior Silver Organic Coating Tested To 500 Hours Salt Spray, With A Heavy Duty EPDM And Stainless Steel BAZ Washer For A Watertight Seal On Roofing Applications.

Read more less

Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Bi-Metal - Exterior - Silver OrganicDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, This Exterior Screw Suits Sheet Steel Applications Up To 1.6mm. The Self-Drilling Carbon Steel Tip Is Fused To An A2-304 Stainless Steel Body, With A Tapered Shank, Washered Hex Head, EPDM Washer, And Silver Organic Finish For Roofing And Construction Use.

Read more less

Drywall Construction Timber Stud Cement Board Screws - PH - Countersunk Wafer - Twin-Cut - Exterior - Silver OrganicThese TIMCO Cement Board Screws Are Designed For Fixing Cement Board To Timber Studs And Thin Sheet Metal Up To 0.6mm. The PH Countersunk Wafer Head, Under-Head Ribs And Twin-Cut Point Support Fast Pick-Up, Reduced Torque And A Flush Finish. Carbon Steel Construction With Exterior Plus Silver Organic Coating Provides Enhanced Corrosion Resistance, With A1 Fire Classification.

Read more less

Drywall Dense Board Screws - PH - Reduced Countersunk - High-Low Thread - BlackThese Black Phosphate Carbon Steel Drywall Dense Board Screws Are Designed For Fixing Dense Board To Timber Stud Work, With A Phillips No.2 Recess For Positive Drive And Reduced Countersunk Head For Neat Seating. The High-Low Thread Improves Pull-Out Performance In Timber And Thin Sheet Metal, While The 25° Super Sharp Point Supports Fast Penetration. Fire Classification A1.

Read more less

EPDM Washers - GalvanisedGalvanised Carbon Steel EPDM Washers Provide A Durable Sealing Interface For Metal Construction Screws, Roofing Sheets And Cladding Fixings. The Integrated EPDM Rubber Seal Compresses Under The Screw Head To Help Prevent Water Ingress, Reduce Vibration And Protect Fixing Points In External Sheet Metal Applications.

Read more less

Metal Construction Fibre Cement Board To Light Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicThese TIMCO Fibre Cement Board Screws Are Designed For Securing Fibre Cement Profile Sheets, Including Big 6 Roofing Sheets, To Light Section Steel Up To 5mm. The Self-Drilling Hex Head Fixing Uses Wings To Ream An Enlarged Hole For Sheet Expansion, With A Heavy Duty EPDM And Stainless Steel BAZ Washer For A Water-Tight Seal. Silver Organic Exterior Coating Provides Corrosion Resistance Tested To 500 Hours Salt Spray.

Read more less

Metal Construction Sheet & Framing Screws - PH - Low Profile Pan - Exterior - Silver OrganicDesigned For Light Duty Metal To Metal Fixing, These Low Profile Pan Head Screws Provide A Flush Finish In Sheet And Framing Applications. Made From Carbon Steel With A Silver Organic Exterior Finish, They Offer Over 500 Hours Salt Spray Resistance. A Large Head Improves Clamping, While The Coarse 60° Self-Tapping Thread And Phillips No.2 Recess Support Secure Driving And Strong Pull-Out Performance.

Read more less

Metal Construction Sheet & Framing Screws - PH - Wafer - Self-Drilling - ZincThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 3.0mm Without Pre-Drilling. The PH Wafer Head Provides A Low Profile Fixing, While The Self-Drilling Carbon Steel Body With Zinc Finish Supports Reliable Installation In Light Gauge Metal Framing. Fire Classification A1 For Suitable Construction Applications.

Read more less

Metal Construction Sheet & Framing Screws - PH - Wafer - Sharp Point - ZincTIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 0.6mm Without Pre-Drilling. The Wafer Head Provides A Low Profile Bearing Surface, While The PH Drive And Sharp Point Support Fast Installation Into Light Gauge Metal. Manufactured From Carbon Steel With A Zinc Finish, They Offer Practical Corrosion Resistance And A1 Fire Classification For Construction Use.

Read more less

Metal Construction Sheet & Stud Screws - PH - Pan - Self-Drilling - ZincA Zinc Finished Carbon Steel Pan Head Screw For Light Duty Metal To Metal Fixing In Interior Dry Lining And Metal Framing Work. The Self Drilling Point Reduces The Need For Pilot Holes, While The Phillips Recess Supports Controlled Installation Into Sheet And Stud Profiles. Suitable For Standard Profile Framing, With Fire Classification A1.

Read more less

Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Self-Drilling - ZincDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, These TIMCO Screws Feature A Self-Drilling Point And Tapered Shank For Fast Installation Through Sheet Steel Up To 1.6mm. The Washered Hexagon Head Includes An EPDM Washer For A Secure Seal, With Zinc Finished Case And Core Hardened Carbon Steel Construction For Roofing And Cladding Applications.

Read more less

Metal Construction Sheet & Framing Screws - PH - Low Profile Pancake - Exterior - Silver OrganicThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Medium Duty Metal To Metal Fixing Where A Flush Finish Is Required. The Low Profile Pancake Head Provides Increased Clamping On Thin Sheet Material, While The Phillips No.2 Recess Supports Positive Drive Control. Carbon Steel Construction, Coarse 60° Self Tapping Thread And Silver Organic Exterior Finish Provide Grip, Pull Out Resistance And Over 500 Hours Salt Spray Performance.

Read more less

Metal Construction Thin Sheet Metal To Timber Screws - Hex - EPDM Washer - Slash Point - Exterior - Silver OrganicThese TIMCO Metal Construction Screws Are Designed To Fix Thin Sheet Metal Up To 0.8mm To Timber Using A Hex Head And Slash Point For Reduced Driving Torque. The Integrated EPDM Washer Helps Prevent Water Ingress, While Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating Provides Corrosion Resistance Tested To 500 Hours Salt Spray.

Read more less

Metal Construction Thin Sheet Metal To Timber Screws - Hex - EPDM Washer - Slash Point - ZincThese TIMCO metal construction screws are designed for fixing thin sheet metal to timber in roofing and construction applications. Suitable for sheet metal up to 0.8mm, the hex head supports secure driving, while the single slash point reduces torque and helps limit timber splitting. Case and core hardened carbon steel with a zinc finish provides durability, and the EPDM washer helps prevent water ingress.

Read more less

Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicThese TIMCO Metal Construction Stitching Screws Are Designed For Joining Two Metal Roofing Sheets Without Pre-Drilling, With A Self-Drilling Point And Tapered Shank For Fast Installation Up To 1.6mm Sheet Steel. The Hex Washer Head Includes An EPDM Washer To Help Seal The Fixing, While Silver Organic Exterior Plating Provides 500 Hours Salt-Spray Corrosion Resistance.

Read more less

Self-Tapping Screws - PZ - Countersunk - ZincThese TIMCO Carbon Steel Self-Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The PZ Countersunk Head Sits Flush In Prepared Countersinks, While The 60 Degree Thread Supports Easy Insertion. A Zinc And Clear Cr3 Finish Provides Corrosion Resistance, With Manufacture To BS 4174:1972.

Read more less

Metal Tapping Screws - Mixed Tray - PZ - Self-Tapping - ZincMixed Tray Of TIMCO Metal Tapping Screws For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Includes Pan, Countersunk And Flange Head Options With PZ Drive, A 60 Degree Self-Tapping Thread And AB Point For Consistent Insertion. Carbon Steel Construction With Zinc And Clear Cr3 Finish, Manufactured To BS 4174:1972.

Read more less

Metal Tapping Screws PZ Pan Self Tapping A2 Stainless SteelThese PZ Pan Head Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Substrates Where A Pre-Drilled Hole Is Available. The Pan Head Provides Improved Clamping, While The A2-304 Austenitic Stainless Steel Construction Supports Outdoor And Corrosive Environments. A 60° Self-Tapping Thread Helps Form A Secure Fixing During Installation.

Read more less

Metal Tapping Screws - PZ - Countersunk - Self-Tapping - A2 Stainless SteelThese PZ Countersunk Self-Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Manufactured From A2-304 Austenitic Stainless Steel, They Suit Outdoor, Damp Or Corrosive Environments, While The Countersunk Head Provides A Flush Finish In Pre-Countersunk Holes. The 60° Self-Tapping Thread Supports Reliable Insertion Into Sheet Metal And Similar Applications.

Read more less

Metal Tapping Screws - PZ - Pan - Self-Tapping - ZincThese TIMCO Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The Pan Head Provides Improved Clamping, While Carbon Steel Construction With A Zinc And Clear Cr3 Finish Supports Corrosion Resistance. A 60° Self-Tapping Thread Aids Insertion, Manufactured To BS 4174:1972.

Read more less

Metal Construction Sheet & Stud Screws - SQ - Pan - Self-Drilling - ZincTIMCO Light Duty Metal Construction Sheet And Stud Screws Are Designed For Interior Metal To Metal Fixing In Dry Lining And Framing Work. Manufactured From Carbon Steel With A Zinc Finish, The Pan Head, Square Recess And Self Drilling Point Support Fast Installation Into Standard Profile Metal Studs. Fire Classification A1.

Read more less

Metal Construction Sheet & Framing Screws - PH - Low Profile Wafer - Exterior - Silver OrganicThese TIMCO low profile wafer head screws are designed for light duty metal to metal fixing and thin sheet framing where a flush finish is required. Made from carbon steel with an Exterior Silver Organic Finish, they offer over 500 hours salt spray resistance. The large head improves clamping, while the coarse 60° self-tapping thread and Phillips No.2 Recess provide secure drive control and pull-out performance.

Read more less