Brad Point Wood BitThis Brad Point Wood Bit Is Designed For Accurate Small Diameter Drilling In Timber And Man-Made Boards. Manufactured From High Grade HSS Steel, It Provides Longer Service Life, Clean Hole Entry And Improved Cutting Control. The Fully Ground Construction Helps Reduce Friction, While Offering Up To 3x Heat Resistance Compared With Standard Carbon Steel Bits.
Long Flat Wood BitDesigned For Deep Drilling In Timber, Chipboard And Plasterboard, This TIMCO Long Flat Wood Bit Uses A 400 mm Length For Extended Reach. The Carbon Steel Body Features A Three Point Tip, Twin Cutting Edges And Recessed Ground Cutting Geometry For Cleaner Holes, Fast Chip Removal And Reliable Use With 3 Jaw Chucks Or Quarter Inch Quick Release Adaptors.
1/4" Flat Wood Bit Extension RodThis TIMCO Extension Rod Is Designed For Drilling In Restricted Access Areas With 1/4" Shank Flat Wood Bits And Spade Bits. Suitable For Wood Drilling Applications Where Extra Reach Is Required, It Provides A Secure Bit Connection And Is Supplied With An Allen Key For Fast Fitting And Adjustment.
Flat Wood BitThis TIMCO Flat Wood Bit Is Designed For Fast, Accurate Drilling In Timber And Man Made Boards. The Carbon Steel Body Features A Bright Finish, Twin Cutting Edges And An Integral Centre Point For Rapid Chip Removal. A 1/4 Inch Quick Release Hex Shank Suits 3 Jaw Chucks And Quick Release Adaptors.
Carpenter's Speed Auger & Flat Wood Bit KitA Compact Wood Drilling Kit For First Fix Pipe And Cable Runs, Designed For Drilling Between Joists And Studding Where Tool Length Is Restricted. Includes Three Speed Augers With Four Flutes For Rapid Chip Ejection And Cleaner Holes, Plus Two Flat Wood Bits For Larger Openings. Suitable For Carpenters, Electricians And Plumbers Using Standard Drills Or Impact Drivers.
High Performance Deep Cut Auger BitThe TIMCO High Performance Deep Cut Auger Bit Is Designed For Clean, Accurate Drilling In Natural Woods Using Impact Drivers. Manufactured From High Carbon Steel S55C With All Hardened Treatment, It Delivers Extended Working Life. A Spurred Cutting Edge, Burr-Free Lead Screw And Unique Twist Geometry Support Fast Starts, Smooth Chip Removal And Reliable Deep Hole Cutting For Trade And DIY Wood Drilling Applications.
TCT Hinge CutterThis TCT Hinge Cutter Is Designed For Cutting Accurate Blind Holes In MDF And Chipboard For Cantilever Door Hinges. Tungsten Carbide Cutting Edges Support Long Service Life, While The Bright And Black Finish Aids Identification. The 12.7 mm Shank Is Suitable For 13 mm Capacity Pillar Drills And 1/2 Inch Industrial Routers.
Hex Shank Speed Auger BitThe TIMCO Hex Shank Speed Auger Bit Is Made From High Grade Carbon Steel For Drilling Clean, Accurate Holes In Timber. Its Four Flute Cutter Design Supports Rapid Chip Ejection, While The Screw Point Helps Pull The Bit Into The Material. A Hex Shank With 1/4 Inch Quick Release Provides Secure Fitting In Compatible Drills And Impact Drivers.
Wood Auger Bit - SDS ShankThis Wood Auger Bit Is Designed For Drilling Deep, Accurate Holes In Timber And Other Wood Based Materials. The SDS Shank Provides Secure Fitment In Compatible Power Tools, While The High Grade Carbon Steel Body Offers Reliable Strength For Regular Site Use. A Screw Point Helps Pull The Bit Through The Wood, With A Bright And Black Finish For Practical Durability.
Wood Auger Bit - Hex ShankA High Performance Wood Auger Bit Designed For Drilling Deep, Clean Holes In Timber, Joists, Beams And General Woodworking Applications. Manufactured From High Grade Carbon Steel, It Features A Screw Point For Accurate Starting And Efficient Pull Through, With A Hex Shank For Secure Grip In Compatible Drill Chucks. The Bright And Black Finish Supports Durability In Site And Workshop Use.
TCT Arrow Head Tile & Glass BitDesigned For Accurate Drilling In Glass, Ceramic And Tile, This TCT Arrow Head Bit Uses A Cross Ground Tungsten Carbide Tip For Clean, Controlled Starts. The Spear Shaped Profile And Shot Blast Finish Support Precise Rotary Drilling At Low RPM. Use Rotary Mode Only, With Water Lubrication Recommended When Drilling Glass.
Premium Diamond Tile & Glass BitDesigned For Clean, Accurate Drilling In Ceramics, Porcelain, Marble, Slate, Tile And Glass. Vacuum Brazed Technology Supports Higher Temperature Dry Drilling Through Hard Porcelain, While An Integrated Lubricant Aids Cooling And Extends Bit Life. The Non Slip Hex Shank Improves Grip In The Chuck, With A Laser Etched Diameter For Quick Size Identification. Suitable For Wet Or Dry Use.
TCT Multi-Purpose Drill BitThe TIMCO TCT Multi-Purpose Drill Bit Is Designed For Rotary Drilling In Steel, Wood, Masonry, PVCu, Ceramics And Concrete. It Features A European Diamond Ground Carbide Tip With A 130° Point For Accurate Starts, Plus High Temperature Copper Brazing, Ground Flutes And Hardened Carbon Steel Construction For Reliable Cutting In Mixed Materials.
Professional Masonry BitProfessional Masonry Bit For Accurate Drilling In Brick, Block, Stone And General Masonry Using Cordless Or Corded Drill Drivers In Rotary Or Hammer Action. Manufactured From Hardened Carbon Steel With A 130° Industrial Carbide Tip, Ground Flute, Heat Treated Body And Silver And Black Finish For Efficient Dust Clearance And Reliable Site Use.
SDS Plus Rebar Cutter - One PieceDesigned For Drilling In Situ Reinforcing Bars Embedded In Concrete, This One Piece SDS Plus Rebar Cutter Fits Standard SDS Plus Fitment Hammer Machines For Rotary Mode Only. Heavy Duty Tungsten Carbide Tips And Heat Treated Construction Support Accurate Cutting Through Rebar, While The Convenient Slot Aids Debris Clearance During Controlled Masonry Work.
Adaptor For Rebar Cutter HeadsThis TIMCO Adaptor Is Designed For Use With 22mm And Above Rebar Cutter Heads, Providing The Correct Connection For Rebar Cutting Applications In Reinforced Concrete Drilling. Suitable For Trade And Site Use, It Supports Accurate Cutter Head Fitment And Must Be Operated In Rotary Mode Only For Correct Performance.
Rebar Cutter - Head OnlyThe TIMCO Rebar Cutter Head Is Designed For Use With A Compatible Rebar Adaptor To Drill Through In-Situ Rebar During Reinforced Concrete Drilling. Supplied As A Head Only, It Provides A Practical Solution For Site Work Where Steel Reinforcement Is Encountered. Use In Rotary Mode Only To Protect The Cutter And Maintain Controlled Drilling Performance.
SDS Shank Rebar Cutters CompleteTIMCO SDS Shank Rebar Cutters Are Designed For Drilling Through In Situ Rebar When Working In Concrete With SDS Plus Machines Set To Rotary Mode Only. The Heavy Duty Tungsten Carbide Tip And High Temperature Brazed Construction Support Accurate Cutting, While Hammer Action Must Remain Switched Off To Prevent Tool Damage.
SDS Max Steels Slotting ToolDesigned For Use With SDS Max Shank Tools, This Slotting Tool Removes Mortar From Brickwork Before Repointing. The SDS Max Fitting Provides Secure Tool Engagement For Heavy Duty Masonry Preparation, While The Chisel Profile Supports Controlled Joint Clearance. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - Extra Wide ChiselDesigned For Use With SDS Max Shank Demolition Tools, This Extra Wide Chisel Is Suited To Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Supports Chipping And Chiselling Of Tile, Mortar, Old Plaster And Rendering, Providing Broad Surface Removal On Masonry Materials. Use In Hammer Only Mode, Not Rotary Mode, For Correct Operation.
SDS Max Steels - Wide ChiselThis Wide Chisel Is Designed For SDS Max Shank Breakers And Demolition Hammers, Providing Controlled Heavy Duty Breaking, Chipping And Chiselling In Concrete, Masonry, Brick And Stone. Suitable For Tile Removal, Mortar Raking, Old Plaster And Rendering Work. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - ChiselDesigned For Use With SDS Max Shank Breakers, This Chisel Supports Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Is Also Suitable For Chipping And Chiselling Tiles, Mortar, Old Plaster And Rendering, Providing A Practical Accessory For Building, Refurbishment And Demolition Work. For Non Rotary Use Only.
SDS Max Steels - PointThis SDS Max Point Steel Is Designed For Use With SDS Max Shank Tools For Heavy Duty Breaking, Chiselling And Demolition Work In Concrete And Masonry. The Pointed Tip Helps Concentrate Impact Force For Effective Material Breakout In Site, Trade And Maintenance Applications. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Hammer BitThe TIMCO SDS Max Hammer Bit Is Designed For Drilling Large Diameter Holes In Concrete, Stone And Masonry Using Rotary Hammers With An SDS Max Tool Holder. Its Narrow Angle 4 Cutter Head Helps Reduce Jamming For Smoother Drilling, While The Shot Peened Body Adds Strength And Durability. A Tungsten Carbide Tip Supports Reliable Cutting Performance In Demanding Masonry Applications.
TIMCO has supplied the UK trade since 1972 growing from a family screw importer into one of Britain's biggest independent suppliers of fixings power tool accessories and building essentials. Discover the full collection at Fixings2Go where TIMCO anchors more shelves than any other supplier we stock. Trade professionals specify it because it delivers real engineering at a price that respects the day rate and DIY users get the same product the professionals fit.
Why Choose TIMCO?
Few brands cover as much of the job as TIMCO. The range at Fixings2Go runs from the C2 screw family and FirmaHold collated nails through the full nail pattern book masonry fixings driver bits and jobber drills to door and gate hardware hose clips and hi-vis workwear. One trusted name one consistent standard across thousands of lines.
Engineered for the Day Rate
TIMCO fixings are designed to save time on the tool. C2 screws pair twin cut points with dual angle threads and ribs under the head so they start fast drive smoothly and countersink cleanly without splitting. Performance that matches premium rivals at a working price.
One Brand Across the Whole Job
First fix to final furniture the range holds together. Frame the stud wall with FirmaHold hang the door on TIMCO hardware fit the letter plate numerals and hooks then drive it all with TIMCO S2 bits. Fewer brands on the van means fewer surprises on site.
Trade Packaging That Makes Sense
Boxes tubs and industry packs sized for real jobs not blister packs. Nails run from handy packs to bulk cartons screws come in trade boxes and driver bits in mixed sets so you buy at the quantity the work demands.
Types of TIMCO Products
Our TIMCO range spans the trades. These are the main families you will find in this collection.
TIMCO Screws
The C2 family from Strong-Fix to Deck-Fix plus Classic Multi Purpose and Solo woodscrews. Sharp starting smooth driving screws for timber decking and general fixing in every common gauge and length.
TIMCO Nails
The full pattern book including round wire lost head clout annular ringshank square twist and slab nails plus FirmaHold collated nails for first fix nailers.
TIMCO Fixings and Fasteners
Masonry and framing anchors timber hangers drive screws rivets staples washers and hose clips. The site consumables that hold the structural and second fix work together.
TIMCO Door and Gate Hardware
One of the deepest sections of the range. Pull handles letter plates door knockers numerals latches padbolts sash fasteners door stops robe hooks and gate furniture in traditional and contemporary finishes.
TIMCO Tools and Driver Bits
Ground jobber drills in singles and sets S2 steel driver bits impact rated magnetic socket drivers and mixed bit sets built to survive impact drivers.
TIMCO Workwear and PPE
Hi-vis clothing and site safety essentials that carry the same trade value as the fixings shelves.
Popular TIMCO Ranges Compared
The named ranges below are the ones tradespeople ask for. Use the table to match the range to the job.
Range
Best For
Key Features
C2 Strong-Fix
Structural timber and heavy carpentry
Twin cut point dual angle thread ribs under head
C2 Deck-Fix
Decking and exterior boards
Weather resistant coating reduced splitting
Classic Multi Purpose
Everyday fixing in timber and board
Sharp point smooth drive clean countersink
Solo Woodscrews
Volume general purpose work
Dependable woodscrew value in trade boxes
FirmaHold
First fix nailers
Collated framing nails for gas and cordless tools
S2 Driver Bits and Ground Jobber Drills
Drilling and driving
Impact ready S2 steel precision ground HSS drills
Frequently Asked Questions
Are TIMCO screws good quality?
Yes TIMCO screws are trade specified across the UK. Ranges like the C2 Strong-Fix carry twin cut points dual angle threads and ribs under the head so they drive faster and hold harder than standard screws at a working price.
What is the difference between C2 Strong-Fix and Classic Multi Purpose screws?
Classic Multi Purpose is the everyday all rounder for timber and board. C2 Strong-Fix adds the full C2 performance package for structural and heavy section timber where drive speed and clamping force matter most.
Is TIMCO a good make?
TIMCO has been a family run British supplier since 1972 and its products are stocked by independent merchants across the country. The brand's reputation rests on trade quality at sensible prices which is exactly why it anchors our fixings shelves.
What does TIMCO make besides screws?
Nails collated nails anchors driver bits drills door and gate hardware hose clips workwear and site consumables. The breadth is the point one trusted brand across the whole van.
Do TIMCO FirmaHold nails fit my nail gun?
FirmaHold collated nails are made for popular gas and cordless first fix framing nailers. Check your tool's angle and gauge against the pack and the range covers the common site standards.
Why shop for TIMCO at Fixings2Go?
We hold one of the deepest TIMCO ranges online covering screws nails fixings hardware tools and PPE all at trade prices with fast UK delivery.
Need More Help Choosing the Right TIMCO Products?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
