Magnetic Impact Screw GuideThe TIMCO Magnetic Impact Screw Guide Is An Impact Resistant Driver Accessory For Controlled Screw Installation With Impact Drivers. Its Sliding Sleeve Holds The Screw Straight For Consistent 90° Driving And A Flush Finish, While The High Strength Magnet Improves Bit Engagement And Fastener Retention. The Sleeve Also Covers Sharp Screw Threads To Help Reduce Finger Contact During Repetitive Fixing Work.
Magnetic Bit HolderThe TIMCO Magnetic Bit Holder Is A 1/4 Inch Hex Drive Adaptor Designed For Impact Driver Use, Providing Secure Bit Retention With A High Strength Magnet. Its Torsion Zone Helps Absorb High Torque Loads, Reducing Stress During Screwdriving Applications In Construction, Joinery, Electrical Installation And General Site Work.
Magnetic Screw HolderThe TIMCO Magnetic Screw Holder Is Designed For Controlled Installation Of Flat Head Screws With Impact Driver Setups. Its High Strength Magnet And Sliding Magnetic Sleeve Hold The Screw Securely For Single Handed Use In Vertical Or Horizontal Fixing Tasks. The Impact Resistant Construction Suits Trade And DIY Applications Where Accurate Screw Starting And Reduced Drop Risk Are Required.
Impact Quick Release AdaptorThe TIMCO Impact Quick Release Adaptor Is Built For Impact Driver Use, Allowing Fast Changes Between 1/4 Inch Hex Drive Accessories. Its Impact Resistant Construction Supports Repeated High Torque Applications, While The High Strength Magnet Helps Secure Bits During Drilling, Driving And Fixing Tasks In Trade Or DIY Work.
Impact Driver Bit Set - CaseThis 49 Piece Impact Driver Bit Set Is Designed For High Torque Impact Tools, Covering Common Fixing And Assembly Tasks In Trade And DIY Applications. The Carbon Steel Bits Include 25mm And 50mm Lengths, Three Nut Drivers And An Impact Magnetic Bit Holder. A Reduced Body Hardness, Heat Treated Construction And Black Phosphate Finish Support Break Resistance, Service Life And Corrosion Protection, Supplied In A Tough Organiser Case.
Impact Driver Bit SetThis Pocket Sized TIMCO Impact Driver Bit Set Includes 10 X 25mm Impact Resistant Bits And A 60mm Impact Magnetic Bit Holder For Screwdriving With High Torque Impact Tools. Manufactured From Carbon Steel With A Black Phosphate Finish, The Bits Use Heat Treatment And Reduced Body Hardness To Absorb Torque Peaks, Improve Durability, And Resist Corrosion In Trade Or DIY Fixing Applications.
S2 Driver Bits - SLTIMCO S2 Driver Bits Are Slotted Screwdriver Bits Manufactured From S2 Hardened Carbon Steel For Increased Strength And Wear Resistance Compared With Standard Chrome Vanadium Bits. Designed For Use With Compatible Power Tool Holders And Adaptors, They Provide Reliable Screw Driving Performance For Trade, Maintenance And General Electrical Installation Work.
S2 Driver Bits - SQDesigned For Square Drive Fasteners, These TIMCO S2 Driver Bits Are Manufactured From S2 Hardened Carbon Steel For Improved Strength And Wear Resistance Compared With Standard Chrome Vanadium Bits. Suitable For Trade And DIY Screwdriving With Cordless Drills And Bit Holders, They Provide Reliable Tip Engagement And Longer Service Life In Repetitive Fixing Applications.
Impact Driver Bits - SQTIMCO SQ Impact Driver Bits Are Designed For Square Drive Fixings Used With High Torque Impact Drivers. Manufactured From Hardened Carbon Steel, The Bits Use A Developed Heat Treatment Process And Reduced Body Hardness To Absorb Torque Peaks Under Load. A Black Phosphate Finish Helps Improve Corrosion Resistance For Regular Trade And DIY Fastening Applications.
S2 Driver Bits HXThese S2 Driver Bits HX Are Manufactured From S2 Hardened Carbon Steel To Provide Greater Strength And Wear Resistance Than Standard Chrome Vanadium Bits. Designed For Hex Socket Fasteners, They Are Suitable For Use With Compatible Bit Holders, Adaptors And Power Tool Drivers In Trade Or DIY Fixing Applications. The Hardened S2 Grade Construction Supports Longer Service Life During Repeated Driving Tasks.
Impact Driver Bits - HexDesigned For Hex Fastening With High Powered Impact Drivers, These Impact Bits Use Hardened Carbon Steel And A Developed Heat Treatment Process To Improve Service Life Under Repeated Torque Peaks. Reduced Body Hardness Helps Absorb High Loads And Limit Breakage, While The Black Phosphate Finish Supports Corrosion Resistance In Trade And DIY Fixing Applications.
Impact Driver Bits - PH - Double EndedTIMCO Double Ended PH Impact Driver Bits Are Made From Hardened Carbon Steel For High Load Impact Driving In Trade And DIY Applications. Designed To Absorb Torque Peaks From Powered Impact Tools, They Use A Developed Heat Treatment Process And Reduced Body Hardness For Break Resistance, With A Black Phosphate Finish To Improve Corrosion Protection.
V5 Impact Driver Bits - TXThese TIMCO V5 TX25 Impact Driver Bits Are Manufactured From V5 Hardened Carbon Steel For High Torsion Strength Under Impact Loads. The 40mm Length Suits Compact Driver Access, Providing Durable, Accurate Fastening In Timber, Metalwork, Construction Fixings And General Trade Applications.
S2 Driver Bits - TXThese TIMCO TX Driver Bits Are Manufactured From S2 Hardened Carbon Steel For High Strength, Wear Resistance, And Longer Service Life Than Standard Chrome Vanadium Bits. Designed For Torx Style Fixings, They Provide Reliable Engagement In Impact Drivers, Drills, And Screwdrivers For Trade And DIY Assembly, Installation, And Maintenance Applications.
Impact Driver Bits - TXThese Hardened Carbon Steel TX Impact Driver Bits Are Designed For High Torque Impact Drivers, Providing Controlled Flex To Absorb Torque Peaks During Fixing. A Newly Developed Heat Treatment Reduces Body Hardness For Load Resistance, While The Black Phosphate Finish Helps Improve Corrosion Protection. Suitable For Trade And DIY Torx Fastening In Timber, Metal And General Construction Applications.
Impact Driver Bits - PZ - Double EndedThese TIMCO PZ Double Ended Impact Driver Bits Are Manufactured From Hardened Carbon Steel For Demanding Impact Driving In Trade And DIY Applications. A Dedicated Torsion Zone Absorbs Sudden Rotational And Downward Forces, While Reduced Body Hardness Helps Withstand High Load Use. The Black Phosphate Finish Improves Corrosion Resistance For Reliable Fastening With Impact Drivers.
1/2" Chuck SDS Plus AdaptorThis TIMCO SDS Plus To 1/2 Inch Chuck Adaptor Is Manufactured From Carbon Steel For Reliable Strength When Connecting Standard Drill Chucks To SDS Plus Machines. It Provides A Practical Interface For Using Compatible Chuck Accessories And Straight Shank Drill Bits In General Drilling Tasks, Helping Convert An SDS Plus Tool For Wider Site And Workshop Applications.
Chuck KeyTIMCO Chuck Key Designed As A Direct Replacement For Traditional 1/2" Keyed Chuck Systems Used On Compatible Drills And Power Tools. Manufactured From Carbon Steel For Durable Engagement With The Chuck Gear, It Provides Reliable Torque Transfer For Tightening And Releasing Drill Bits In Workshop, Site, Maintenance And General Trade Applications.
1/2" Chuck & Key SetA Traditional Keyed Chuck And Key Set For Drills With A 1/2" Shaft, Providing Secure Bit Retention For General Drilling, Workshop, And Site Use. Manufactured From Carbon Steel, It Accepts 1.5mm To 13mm Drill Bits And Is Suitable For Replacing Worn Chucks Or Equipping Compatible Corded And Cordless Drills.
1/2" Keyless Chuck & SDS Plus Adaptor SetThis TIMCO Keyless Chuck And SDS Plus Adaptor Set Converts SDS Plus Rotary Hammer Drills For Standard Round Shank Drill Bits. The Hand Tightened Three Jaw Chuck Fits A 1/2" Shaft And Accepts 1.5mm To 13mm Drill Bits, With Carbon Steel Construction For General Drilling Applications On Impact Drills Up To 750W.
Single Handed Keyless ChuckThis TIMCO Single Handed Keyless Chuck Provides Fast, Tool Free Bit Changes For Drilling Applications. The Three Jaw Carbon Steel Design Fits Drills With A 1/2 Inch Shaft And Securely Holds 1.5mm To 13mm Drill Bits. Suitable For Impact Drills Up To 750 Watt, It Is A Practical Replacement Or Upgrade Chuck For Trade And DIY Power Tool Use.
Super Heavy Duty ChuckThis Carbon Steel Keyless Heavy Duty Three Jaw Chuck Is Designed For Hand Tightened Bit Changes On Compatible Drills With A 1/2" Shaft. Suitable For Impact Drills Up To 1,000 Watt, It Provides Secure Holding For 1.5mm To 13mm Drill Bits, Making It Practical For Trade And General Drilling Applications.
Heavy Duty Keyless ChuckA Keyless, Hand Tightened Three Jaw Chuck Designed For Drills With A 1/2 Inch Shaft. Made From Carbon Steel For Durable Workshop Use, It Is Suitable For Impact Drills Up To 750W And Accepts 1.5mm To 13mm Drill Bits. A Practical Replacement Or Upgrade Chuck For General Drilling, Trade Maintenance And Site Applications.
Drill Wheel Brush - Twisted Knot Steel WireThis Twisted Knot Steel Wire Wheel Brush Is Designed For Drill Use Where Aggressive Surface Preparation Is Required. Made From Carbon Steel, It Is Suitable For Removing Paint, Rust, Rubber, Concrete Residue And Dirt From Metal, Masonry And Other Robust Surfaces In Trade Or DIY Applications.
TIMCO has supplied the UK trade since 1972 growing from a family screw importer into one of Britain's biggest independent suppliers of fixings power tool accessories and building essentials. Discover the full collection at Fixings2Go where TIMCO anchors more shelves than any other supplier we stock. Trade professionals specify it because it delivers real engineering at a price that respects the day rate and DIY users get the same product the professionals fit.
Why Choose TIMCO?
Few brands cover as much of the job as TIMCO. The range at Fixings2Go runs from the C2 screw family and FirmaHold collated nails through the full nail pattern book masonry fixings driver bits and jobber drills to door and gate hardware hose clips and hi-vis workwear. One trusted name one consistent standard across thousands of lines.
Engineered for the Day Rate
TIMCO fixings are designed to save time on the tool. C2 screws pair twin cut points with dual angle threads and ribs under the head so they start fast drive smoothly and countersink cleanly without splitting. Performance that matches premium rivals at a working price.
One Brand Across the Whole Job
First fix to final furniture the range holds together. Frame the stud wall with FirmaHold hang the door on TIMCO hardware fit the letter plate numerals and hooks then drive it all with TIMCO S2 bits. Fewer brands on the van means fewer surprises on site.
Trade Packaging That Makes Sense
Boxes tubs and industry packs sized for real jobs not blister packs. Nails run from handy packs to bulk cartons screws come in trade boxes and driver bits in mixed sets so you buy at the quantity the work demands.
Types of TIMCO Products
Our TIMCO range spans the trades. These are the main families you will find in this collection.
TIMCO Screws
The C2 family from Strong-Fix to Deck-Fix plus Classic Multi Purpose and Solo woodscrews. Sharp starting smooth driving screws for timber decking and general fixing in every common gauge and length.
TIMCO Nails
The full pattern book including round wire lost head clout annular ringshank square twist and slab nails plus FirmaHold collated nails for first fix nailers.
TIMCO Fixings and Fasteners
Masonry and framing anchors timber hangers drive screws rivets staples washers and hose clips. The site consumables that hold the structural and second fix work together.
TIMCO Door and Gate Hardware
One of the deepest sections of the range. Pull handles letter plates door knockers numerals latches padbolts sash fasteners door stops robe hooks and gate furniture in traditional and contemporary finishes.
TIMCO Tools and Driver Bits
Ground jobber drills in singles and sets S2 steel driver bits impact rated magnetic socket drivers and mixed bit sets built to survive impact drivers.
TIMCO Workwear and PPE
Hi-vis clothing and site safety essentials that carry the same trade value as the fixings shelves.
Popular TIMCO Ranges Compared
The named ranges below are the ones tradespeople ask for. Use the table to match the range to the job.
Range
Best For
Key Features
C2 Strong-Fix
Structural timber and heavy carpentry
Twin cut point dual angle thread ribs under head
C2 Deck-Fix
Decking and exterior boards
Weather resistant coating reduced splitting
Classic Multi Purpose
Everyday fixing in timber and board
Sharp point smooth drive clean countersink
Solo Woodscrews
Volume general purpose work
Dependable woodscrew value in trade boxes
FirmaHold
First fix nailers
Collated framing nails for gas and cordless tools
S2 Driver Bits and Ground Jobber Drills
Drilling and driving
Impact ready S2 steel precision ground HSS drills
Frequently Asked Questions
Are TIMCO screws good quality?
Yes TIMCO screws are trade specified across the UK. Ranges like the C2 Strong-Fix carry twin cut points dual angle threads and ribs under the head so they drive faster and hold harder than standard screws at a working price.
What is the difference between C2 Strong-Fix and Classic Multi Purpose screws?
Classic Multi Purpose is the everyday all rounder for timber and board. C2 Strong-Fix adds the full C2 performance package for structural and heavy section timber where drive speed and clamping force matter most.
Is TIMCO a good make?
TIMCO has been a family run British supplier since 1972 and its products are stocked by independent merchants across the country. The brand's reputation rests on trade quality at sensible prices which is exactly why it anchors our fixings shelves.
What does TIMCO make besides screws?
Nails collated nails anchors driver bits drills door and gate hardware hose clips workwear and site consumables. The breadth is the point one trusted brand across the whole van.
Do TIMCO FirmaHold nails fit my nail gun?
FirmaHold collated nails are made for popular gas and cordless first fix framing nailers. Check your tool's angle and gauge against the pack and the range covers the common site standards.
Why shop for TIMCO at Fixings2Go?
We hold one of the deepest TIMCO ranges online covering screws nails fixings hardware tools and PPE all at trade prices with fast UK delivery.
Need More Help Choosing the Right TIMCO Products?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
