Round Wire Nails - BrightThese 100mm bright round wire nails are manufactured from carbon steel with a 4.5mm shank diameter and a full round head for reliable clamping in general joinery and timber fixing tasks. Self coloured with no plating, they are suited to indoor applications and conform to Eurocode 5 and service class 1 requirements.
Round Wire Nails Stainless SteelThese A2 Stainless Steel round wire nails are designed for general clamping and fixing in external or corrosive environments, including Green Oak. Featuring a full round head, 4mm shank diameter and 100mm length, they offer reliable holding performance for construction and joinery applications. Suitable for service class 3 use and conforming to Eurocode 5.
Round Lost Head Nails - BrightThese 40mm Round Lost Head Nails are made from Bright Carbon Steel and are designed for indoor joinery, trim and second fix applications where a concealed finish is required. The round lost head can be punched below the timber surface for neat finishing before filling or painting. With a 2.36mm shank diameter, they provide reliable holding in general woodworking tasks.
Round Lost Head Nails - Stainless SteelRound Lost Head nails are designed for joinery and finishing work where a concealed fixing is required. The head can be punched below the timber surface for a neat result, while the 2.65mm shank diameter and 40mm length suit a range of internal and external woodworking tasks. Manufactured from A2 stainless steel, they offer strong corrosion resistance and are suitable for use with green oak and other corrosive timbers.
Rivets Flange Head AluminiumThese aluminium flange head rivets are designed for heavy duty sheet to sheet fixing where welding or bolting is unsuitable. The 4.8 x 25 mm body provides a secure, low profile finish, with a 4.9 mm drill hole requirement and 16 to 21 mm grip range. Fitted with a zinc and clear Cr3 mandrel, they suit steel, aluminium, hard plastic and PVCu substrates.
Presser Point Staples CopperTIMCO Presser Point Staples Are Manufactured From Solid Copper For Excellent Corrosion Resistance In Roofing, Cladding And General Exterior Fixing Applications. Designed For Secure Timber Fixing, They Feature A 25mm Length And 2.65mm Shank Diameter For Reliable Holding Performance. Approximate Yield Is 830 Pieces Per 1kg, Making Them Suitable For Trade And Maintenance Use.
S2 Driver Bits - PZThis PZ1 Pozi Driver Bit Is Made From S2 Hardened Carbon Steel For Increased Strength, Wear Resistance And Long Service Life. With A 25mm Length, 1/4 Inch Hex Shank And Steel Finish, It Is Designed For Use In Compatible Power Tools And Bit Holders. Suitable For Repetitive Screwdriving Tasks Where Consistent Fit, Durability And Reliable Torque Transfer Are Required.
S2 Driver Bits - PHBuilt For Reliable Driving In Phillips Fixings, This PH1 S2 Driver Bit Is Made From Premium S2 Hardened Carbon Steel For Improved Strength And Wear Resistance Over Standard Chrome Vanadium Bits. The 25mm Length Suits General Screwdriving Tasks, While The 1/4 Inch Hex Shank Ensures Secure Compatibility With Standard Bit Holders, Drills And Drivers.
Oval Nails - BrightThese Bright Carbon Steel oval nails are designed for indoor woodworking and general fixing where a concealed finish is required. The oval head helps reduce visibility once driven below the surface, making them suitable for trim, joinery and second fix tasks. With a 100mm Length and approximately 64 pieces per 1kg, they offer reliable performance for trade and site use in dry internal applications.
Mixed S2 Driver Bit SetThis 37 Piece mixed driver bit set is designed for general fastening, installation and maintenance work across trade and DIY applications. Manufactured from S2 Hardened Carbon Steel, it includes 25mm and 50mm Phillips, Pozi, TX and slotted bits, plus a magnetic adaptor and socket drivers, all supplied in a robust weatherproof case for organised storage and transport.
Masonry Nails - ZincThese 2.5mm x 25mm hardened carbon steel masonry nails are designed for secure fixing into masonry and concrete block. The countersunk head helps achieve a flush finish, while the 35° sharp point aids quick penetration and accurate placement. Finished in bright zinc for internal use, they are suited to general construction, fitting and repair work where a strong, reliable fixing is required.
Jagged Plasterboard Nails GalvanisedThese 30mm jagged plasterboard nails are a traditional fixing for securing plasterboard in timber applications where a dependable mechanical hold is required. Manufactured from carbon steel with a 2.65mm shank and galvanised finish, they offer medium duty rust protection, conform to Eurocode 5 and service class 2, and achieve Fire Classification A1.
Impact Driver Bits - PZTIMCO PZ1 impact driver bit designed for demanding fastening applications with a 25mm length and 1/4 Inch hex shank for secure compatibility with impact drivers. Manufactured from hardened carbon steel, it features a torsion zone to absorb rotational force, reduced body hardness for high load resistance, and a black phosphate finish to help improve corrosion resistance and service life.
Roll Forged Jobber Drills - HSSThis 1/2 Inch HSS Jobber Drill Is Designed For Drilling Non Alloy Materials With Reliable Accuracy And Consistent Cutting Performance. The 135° Split Point Reduces Bit Drift And Supports Faster Penetration Without Pre Drilling Or Centre Punching. Manufactured To DIN 338 With A Roll Forged Black Oxide Finish, It Features A Straight 1/2 Inch Shank, 151 Mm Overall Length, And 101 Mm Working Length.
Ground Long Jobber Drills HSS M2This 10mm Ground Long Jobber Drill Is Manufactured From M2 Alloyed HSS Steel For Accurate Drilling In Carbon And Alloy Steel, Cast Iron, Non Ferrous Metals And Plastics. Fully Ground To DIN 340, It Features A 135° Split Point For Reduced Drift, Faster Penetration And Precise Starting. With A 184mm Total Length, 121mm Working Length And Straight 10mm Shank, It Suits Extended Reach Drilling Applications.
Ground Jobber Drills - HSS M2Ground Jobber Drill Manufactured From M2 Grade HSS Steel For Accurate, Consistent Drilling In Non Alloy Materials. Fully Ground From Solid Material And Produced To DIN 338 For Dimensional Precision. This Imperial 1/16 Inch Drill Features A Straight Shank, 43mm Overall Length And 20mm Working Length, Making It Suitable For Engineering, Maintenance And General Metal Drilling Tasks.
Hose Clips - ZincZinc Plated Carbon Steel Worm Drive Hose Clip Designed For Securing Large Diameter Hoses And Pipe Connections In Plumbing, Automotive And General Maintenance Applications. Manufactured To BS 5315:1991, It Features A 110 To 140mm Clamping Range And A 7mm Slotted Hex Head For Straightforward Adjustment And Reliable Tightening In Service.
Hose Clips ZincZinc Plated Carbon Steel Worm Drive Hose Clip Designed For Securing Hoses In Plumbing, Automotive And General Maintenance Applications. Suitable For 11 To 16mm Hose Sizes, It Features A 7mm Slotted Hex Head For Simple Adjustment And Reliable Clamping. Manufactured To BS 5315 1991, It Provides A Durable, Consistent Fixing For Professional And Domestic Use.
TIMCO MDPE Female Adaptors for MDPE Pipe to BSP Thread These TIMCO MDPE female adaptors are designed to connect MDPE water pipe to male BSP threaded fittings, providing a fast, secure joint for potable water pipework. They use a push-in and turn connection for quick installation, are WRAS approved, and are built for external use with strong impact resistance and performance in sub-zero temperatures. Ideal for domestic and commercial cold water supply lines, repairs, and system alterations where a demountable, reliable transition from MDPE pipe to threaded components is required.
Double Ball Catches - ChromeA Solid Brass Push Fit Catch Designed To Secure Cupboard And Cabinet Doors With A Reliable Double Ball Closing Action. Finished In Satin Chrome For A Clean, Durable Appearance, It Is Suitable For Furniture And Joinery Applications Where A Neat Mechanical Catch Is Required. The Body Measures 43 x 8mm, Providing A Compact Fit For Domestic Or Trade Installation.
