Stitching Roofing Screws
-
Timco Metal Construction Stitching Screws Stainless Steel, Silver, Lime, Red, Ash
Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Bi-Metal - Exterior - Silver OrganicDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, This Exterior Screw Suits Sheet Steel Applications Up To 1.6mm. The Self-Drilling Carbon Steel Tip Is Fused To An A2-304 Stainless Steel Body, With A Tapered Shank, Washered Hex Head, EPDM Washer, And Silver Organic Finish For Roofing And Construction Use.
£27.32 Ex. VAT £32.78 In. VAT
-
Timco Metal Construction Composite Panel Screws Stainless Steel, Silver, Lime, Ash
Metal Construction Composite Panel Screws - Hex - EPDM Washer - Self-Drilling - Bi-Metal - Exterior - Silver OrganicDesigned To Fix Composite Panels To Light Section Steel Up To 5mm, These TIMCO Hex Head Screws Feature A Self-Drilling Carbon Steel Tip Fused To An A2-304 Stainless Steel Body. The Split Thread Supports Secure Clamping, While The EPDM Washer Helps Seal Against Weather In Exterior Roofing And Cladding Applications. Silver Organic Finish Provides A Clean, Corrosion Resistant Fixing.
£64.50 Ex. VAT £77.40 In. VAT
-
Timco Metal Construction Composite Panel Screws Silver, Steel, Lime, Ash
Metal Construction Composite Panel Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicDesigned For Fixing Composite Panels To Light Section Steel Up To 5mm, These TIMCO Self-Drilling Screws Feature A Hex Head, Split Thread And EPDM Washer For Secure, Weather Resistant Installation. Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating Provides Durable Corrosion Resistance Tested To 500 Hours Salt Spray.
£10.83 - £22.14 Ex. VAT £13.00 - £26.57 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Steel, Zinc, Lime
Metal Construction Sheet & Framing Screws - PH - Wafer - Sharp Point - ZincTIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 0.6mm Without Pre-Drilling. The Wafer Head Provides A Low Profile Bearing Surface, While The PH Drive And Sharp Point Support Fast Installation Into Light Gauge Metal. Manufactured From Carbon Steel With A Zinc Finish, They Offer Practical Corrosion Resistance And A1 Fire Classification For Construction Use.
£8.33 Ex. VAT £10.00 In. VAT
-
Timco Metal Construction Sheet & Framing Screws Steel, Zinc, Lime
Metal Construction Sheet & Framing Screws - PH - Wafer - Self-Drilling - ZincThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Stitching Drywall Track And Ceiling Track Systems Up To 3.0mm Without Pre-Drilling. The PH Wafer Head Provides A Low Profile Fixing, While The Self-Drilling Carbon Steel Body With Zinc Finish Supports Reliable Installation In Light Gauge Metal Framing. Fire Classification A1 For Suitable Construction Applications.
£6.35 - £11.23 Ex. VAT £7.62 - £13.48 In. VAT
-
Timco Metal Construction Light Section Screws Steel, Zinc, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - ZincHex Head Self-Drilling Screws Designed For Joining Roofing Sheets To Light Section Steel Up To 3.0mm Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Provide Reliable Fixing Performance For Roofing And Construction Applications. Suitable For Light Duty Section Steel, These Screws Feature A Hex Head For Positive Driver Engagement And Carry An A1 Fire Classification.
£10.73 - £17.07 Ex. VAT £12.88 - £20.48 In. VAT
-
Timco Metal Construction Heavy Section Screws Stainless Steel, Silver, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - Bi-Metal - Exterior - Silver OrganicDesigned For Attaching Metal To Heavy Section Steel Up To 12mm Without Pre-Drilling. The Hex Head Self-Drilling Screw Uses A Hardened Carbon Steel Drill Tip Fused To An A2-304 Stainless Steel Body, Providing Strength, Corrosion Resistance And Reliable Exterior Fixing For Roofing, Cladding And Construction Applications.
£28.45 - £32.62 Ex. VAT £34.14 - £39.14 In. VAT
-
Timco Metal Construction Heavy Section Screws Steel, Zinc, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - ZincTIMCO Metal Construction Heavy Section Screws Are Designed For Fixing Metal To Heavy Section Steel Without Pre-Drilling. The Hex Head Supports Secure Driving, While The Self-Drilling Tip Cuts Into Max. 12mm Steel. Made From Case And Core Hardened Carbon Steel With A Zinc Finish, They Suit Roofing, Cladding And Structural Metalwork Applications.
£4.43 - £10.19 Ex. VAT £5.31 - £12.23 In. VAT
-
Timco Metal Construction Light Section Screws Stainless Steel, Steel, Silver, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - Bi-Metal - Exterior - Silver OrganicHex Head Self-Drilling Screws Designed For Joining Roofing Sheets To Light Section Steel Up To 5.0mm Without Pre-Drilling. The Bi-Metal Construction Combines An A2-304 Stainless Steel Body With A Hardened Carbon Steel Drill Tip, Providing Reliable Drilling Performance And Exterior Corrosion Resistance With A Silver Organic Finish.
£22.77 - £48.57 Ex. VAT £27.32 - £58.28 In. VAT
-
Timco Metal Construction Light Section Screws Silver, Steel, Lime, Ash
Metal Construction Light Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicHex Head Self-Drilling Screws For Joining Roofing Sheets To Max. 5.0mm Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With An Exterior Silver Organic Finish, They Provide Durable Corrosion Protection Rated To 500 Hours Salt-Spray Resistance And Meet Fire Classification A1 For Roofing And Construction Applications.
£3.13 - £9.94 Ex. VAT £3.76 - £11.93 In. VAT
-
Timco Metal Construction Light Section Screws Steel, Zinc, Lime, Ash
Metal Construction Light Section Screws - Hex - EPDM Washer - Self-Drilling - ZincHex Head Self-Drilling Screws For Fixing Roofing Sheets To Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Are Suitable For Steel Sections Up To 5.0mm. The EPDM Washer Helps Form A Weather-Resistant Seal For Roofing And Cladding Applications.
£2.61 - £4.98 Ex. VAT £3.13 - £5.97 In. VAT
-
Timco Metal Construction Light Section Screws Silver, Steel, Lime, Ash
Metal Construction Light Section Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicHex Head Self-Drilling Screws For Fixing Roofing Sheets To Light Section Steel Without Pre-Drilling. Manufactured From Case And Core Hardened Carbon Steel With An EPDM Washer For Weather Sealing, They Suit Exterior Roofing And Construction Applications. The Silver Organic Exterior Finish Provides 500 Hours Salt-Spray Resistance And Is Rated For Steel Sections Up To 5.0mm.
£4.25 - £52.36 Ex. VAT £5.10 - £62.83 In. VAT
-
Timco Helical Bars, A2 Stainless Steel
Helical Bars - A2 Stainless SteelThese Helical Bars Are Designed For Crack Stitching And Reinforcement In Masonry Joints, Helping Restore Structural Stability In Brick And Blockwork. Manufactured From A2 304 Austenitic Stainless Steel, They Provide Reliable Corrosion Resistance For Exposed Or Aggressive Conditions, Including Use With Corrosive Base Materials Such As Green Oak.
£113.41 - £171.26 Ex. VAT £136.09 - £205.51 In. VAT
-
Timco Metal Construction Heavy Section Screws Steel, Zinc, Lime, Ash
Metal Construction Heavy Section Screws - Hex - EPDM Washer - Self-Drilling - ZincDesigned For Attaching Metal To Heavy Section Steel Without Pre-Drilling, These Hex Head Self-Drilling Screws Suit Roofing, Cladding, And Construction Fixing Applications. Manufactured From Case And Core Hardened Carbon Steel With A Zinc Finish, They Provide Reliable Penetration Into Steel Up To 12mm Maximum Thickness, While The EPDM Washer Helps Seal The Fixing Point.
£3.89 - £11.81 Ex. VAT £4.67 - £14.17 In. VAT
-
Timco Metal Construction Heavy Section Screws Silver, Steel, Lime, Ash
Metal Construction Heavy Section Screws - Hex - Self-Drilling - Exterior - Silver OrganicDesigned For Attaching Metal To Heavy Section Steel Without Pre-Drilling, These Hex Head Self-Drilling Screws Suit Roofing, Cladding, And General Construction Fixing. Manufactured From Case And Core Hardened Carbon Steel With A Silver Organic Exterior Finish, They Provide Durable Corrosion Resistance And Are Suitable For Steel Sections Up To 12 Mm.
£5.19 - £16.49 Ex. VAT £6.23 - £19.79 In. VAT
-
Timco Metal Construction Heavy Section Screws Silver, Steel, Lime, Ash
Metal Construction Heavy Section Screws - Hex - EPDM Washer - Self-Drilling - Exterior - Silver OrganicThese TIMCO Metal Construction Heavy Section Screws Are Designed For Fixing Metal To Heavy Section Steel Up To 12mm Without Pre-Drilling. The Hex Head Provides Positive Drive Control, While The EPDM Washer Helps Seal The Fixing Point. Made From Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating, They Offer Durable Corrosion Resistance Tested To 500 Hours Salt Spray.
£6.87 - £31.87 Ex. VAT £8.24 - £38.24 In. VAT
-
Timco Metal Construction Stitching Screws Steel, Zinc, Lime, Red, Ash
Metal Construction Stitching Screws - For Sheet To Sheet - Hex - EPDM Washer - Self-Drilling - ZincDesigned For Stitching Two Metal Roofing Sheets Together Without Pre-Drilling, These TIMCO Screws Feature A Self-Drilling Point And Tapered Shank For Fast Installation Through Sheet Steel Up To 1.6mm. The Washered Hexagon Head Includes An EPDM Washer For A Secure Seal, With Zinc Finished Case And Core Hardened Carbon Steel Construction For Roofing And Cladding Applications.
£3.54 Ex. VAT £4.25 In. VAT
-
Timco Metal Tapping Screws Stainless Steel, Lime
Metal Tapping Screws - PZ - Countersunk - Self-Tapping - A2 Stainless SteelThese PZ Countersunk Self-Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Manufactured From A2-304 Austenitic Stainless Steel, They Suit Outdoor, Damp Or Corrosive Environments, While The Countersunk Head Provides A Flush Finish In Pre-Countersunk Holes. The 60° Self-Tapping Thread Supports Reliable Insertion Into Sheet Metal And Similar Applications.
£1.32 - £9.25 Ex. VAT £1.58 - £11.10 In. VAT
-
Timco Metal Tapping Screws Stainless Steel, Lime
Metal Tapping Screws - PZ - Flange - Self-Tapping - A2 Stainless SteelThese TIMCO Metal Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Used. The A2-304 Austenitic Stainless Steel Construction Provides Corrosion Resistance For Outdoor Or Aggressive Environments, While The Flange Head Improves Clamping And Finish. A 60° Self-Tapping Thread Supports Reliable Insertion Into Suitable Metal Applications.
£3.32 - £4.40 Ex. VAT £3.98 - £5.28 In. VAT
-
Timco Metal Tapping Screws Steel, Clear, Zinc, Lime
Metal Tapping Screws - PZ - Countersunk - Self-Tapping - ZincUsed For Stitching Metal Or Attaching Fixtures To Metal, These PZ Countersunk Self Tapping Screws Require A Pre Drilled Hole And Sit Flush In Pre Countersunk Applications. Manufactured From Carbon Steel With A Zinc & Clear Cr3 Finish, They Feature A 60° Self Tapping Thread For Reliable Insertion And Are Made To BS 4174:1972.
£1.40 - £4.53 Ex. VAT £1.68 - £5.44 In. VAT
-
Timco Metal Tapping Screws Steel, Clear, Zinc, Lime
Metal Tapping Screws - PZ - Pan - Self-Tapping - ZincThese TIMCO Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The Pan Head Provides Improved Clamping, While Carbon Steel Construction With A Zinc And Clear Cr3 Finish Supports Corrosion Resistance. A 60° Self-Tapping Thread Aids Insertion, Manufactured To BS 4174:1972.
£0.94 - £5.68 Ex. VAT £1.13 - £6.82 In. VAT
-
Timco Metal Tapping Screws Steel, Clear, Zinc, Lime
Metal Tapping Screws - PZ - Flange - Self-Tapping - ZincThese TIMCO Metal Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The 60° Self-Tapping Thread Supports Clean Insertion, While The Flange Head Improves Clamp Load And Provides A Neat Finish. Manufactured From Zinc And Clear Cr3 Carbon Steel To BS 4174:1972 For Reliable General Metalwork Applications.
£1.49 - £3.03 Ex. VAT £1.79 - £3.63 In. VAT
-
Timco Metal Tapping Screws Stainless Steel, Lime
Metal Tapping Screws PZ Pan Self Tapping A2 Stainless SteelThese PZ Pan Head Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Substrates Where A Pre-Drilled Hole Is Available. The Pan Head Provides Improved Clamping, While The A2-304 Austenitic Stainless Steel Construction Supports Outdoor And Corrosive Environments. A 60° Self-Tapping Thread Helps Form A Secure Fixing During Installation.
£1.28 - £10.36 Ex. VAT £1.54 - £12.43 In. VAT
-
Timco Metal Tapping Screws Steel, Clear, Zinc
Metal Tapping Screws - Mixed Tray - PZ - Self-Tapping - ZincMixed Tray Of TIMCO Metal Tapping Screws For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Includes Pan, Countersunk And Flange Head Options With PZ Drive, A 60 Degree Self-Tapping Thread And AB Point For Consistent Insertion. Carbon Steel Construction With Zinc And Clear Cr3 Finish, Manufactured To BS 4174:1972.
£18.99 Ex. VAT £22.79 In. VAT
You have seen 24 out of 30 products
Stitching Roofing Screws That Lock Side Laps Tight
Discover our full collection of Stitching Roofing Screws at Fixings2Go. Part of our wider Roofing Screws collection stitching screws join metal sheet to metal sheet along side laps flashings and trims where there is no purlin behind. The short drilling point pierces both sheets and the washer clamps the lap weathertight stopping sheets chattering and lifting in wind.
TIMCO metal construction stitching screws come in 22mm and 25mm with zinc silver exterior and A2 stainless finishes in 100 and 120 piece packs. Around them sit sheet and framing screws from 13mm to 25mm for trims and light framing plus self tapping and metal tapping screws in zinc and stainless steel from gauge 4 to 12 for smaller sheet metal jobs and repairs.
Frequently Asked Questions
What is a stitching screw used for?
Stitching screws fasten two overlapping metal sheets together between purlins typically along the side laps of roof and wall cladding. They stop the free edge lifting and keep the lap sealed against driven rain.
How far apart should stitching screws go?
Side laps are commonly stitched at 300mm to 500mm centres with closer spacing on exposed elevations. Follow the sheet manufacturer's fixing pattern for the profile you are laying.
Why shop for Stitching Roofing Screws at Fixings2Go?
We stock TIMCO stitching and sheet screws in zinc exterior and stainless finishes at trade prices with fast UK delivery.
Need More Help Choosing the Right Stitching Roofing Screws?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
Best Sellers
-
£0.69 Ex. VAT £0.83 In. VAT
-
£1.07 - £40.55 Ex. VAT £1.28 - £48.66 In. VAT
-
£1.94 - £3.32 Ex. VAT £2.33 - £3.98 In. VAT
-
£0.87 - £1.38 Ex. VAT £1.04 - £1.65 In. VAT
-
£0.34 Ex. VAT £0.41 In. VAT
-
£0.73 Ex. VAT £0.88 In. VAT
-
£9.40 Ex. VAT £11.28 In. VAT
-
£3.58 - £32.95 Ex. VAT £4.29 - £39.54 In. VAT
