Self-Tapping Metal Screws
-
TIMCO Timco Drywall Construction Metal Stud Cement Board Screws Steel, Silver, Lime
Drywall Construction Metal Stud Cement Board Screws - PH - Countersunk Wafer - Self-Drilling - Exterior - Silver OrganicTIMCO Drywall Cement Board Screws Are Designed For Fixing Cement Board To Steel Dry Lining Frames Up To 3.0mm. The Countersunk Wafer Head With Underside Ribs Helps Achieve A Flush Finish, While The Self-Drilling Point And Self-Tapping Thread Support Fast Installation Into Light Section Steel. Carbon Steel Construction With Exterior Plus Silver Organic Coating Provides Enhanced Corrosion Resistance For Damp Or Corrosive Environments And A1 Fire Classification.
£4.67 - £5.59
-
TIMCO TIMCO Collated Timber to Steel CSK Wing-Tip Self-Drilling Screws Silver Organic (00044COLLW)
Collated Timber To Light Section Screws - Countersunk - Wing-Tip - Self-Drilling - Exterior - Silver OrganicThese TIMCO Collated Timber To Light Section Screws Are Designed For Fixing Wood To Light Gauge Steel Up To 4.0mm. The Wing-Tip Reams Timber To Reduce Heat Build-Up Before Breaking Off On Metal, Allowing The Coarse 60° Self-Tapping Thread To Cut Cleanly. A Countersunk Head With Self-Countersinking Ribs, Carbon Steel Construction And Exterior Silver Organic Finish Support Durable, Corrosion-Resistant Outdoor Installation.
£45.26
-
TIMCO TIMCO Collated Wing-Tip Self-Drilling Screws Countersunk Zinc For Wood Metal (4865COLLW)
Collated Timber To Light Section Screws - Countersunk - Wing-Tip - Self-Drilling - ZincTIMCO Collated Wing-Tip Screws Are Designed For Fixing Timber To Light Section Steel Up To 4.0mm. The Coarse 60° Self-Tapping Thread Provides Rapid Insertion And Strong Hold, While Wings Ream The Timber Before Breaking Off On Metal. Zinc Plated Carbon Steel Construction Supports Durable, Countersunk Fixing With Leading Collated Screw Guns.
£41.49
-
TIMCO TIMCO Low Profile Pan Head Metal Framing Screws Phillips Silver (LPP16)
Metal Construction Sheet & Framing Screws - PH - Low Profile Pan - Exterior - Silver OrganicDesigned For Light Duty Metal To Metal Fixing, These Low Profile Pan Head Screws Provide A Flush Finish In Sheet And Framing Applications. Made From Carbon Steel With A Silver Organic Exterior Finish, They Offer Over 500 Hours Salt Spray Resistance. A Large Head Improves Clamping, While The Coarse 60° Self-Tapping Thread And Phillips No.2 Recess Support Secure Driving And Strong Pull-Out Performance.
£8.62
-
TIMCO Timco Metal Construction Sheet & Framing Screws Steel, Silver, Lime
Metal Construction Sheet & Framing Screws - PH - Low Profile Pancake - Exterior - Silver OrganicThese TIMCO Metal Construction Sheet And Framing Screws Are Designed For Medium Duty Metal To Metal Fixing Where A Flush Finish Is Required. The Low Profile Pancake Head Provides Increased Clamping On Thin Sheet Material, While The Phillips No.2 Recess Supports Positive Drive Control. Carbon Steel Construction, Coarse 60° Self Tapping Thread And Silver Organic Exterior Finish Provide Grip, Pull Out Resistance And Over 500 Hours Salt Spray Performance.
£12.56 - £15.17
-
TIMCO TIMCO Metal Framing Screws Phillips Low Profile Wafer Head Silver (22LPW)
Metal Construction Sheet & Framing Screws - PH - Low Profile Wafer - Exterior - Silver OrganicThese TIMCO low profile wafer head screws are designed for light duty metal to metal fixing and thin sheet framing where a flush finish is required. Made from carbon steel with an Exterior Silver Organic Finish, they offer over 500 hours salt spray resistance. The large head improves clamping, while the coarse 60° self-tapping thread and Phillips No.2 Recess provide secure drive control and pull-out performance.
£4.48
-
TIMCO Timco Metal Tapping Screws Stainless Steel, Steel, Lime
Metal Tapping Screws - PZ - Countersunk - Self-Tapping - A2 Stainless SteelThese PZ Countersunk Self-Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Manufactured From A2-304 Austenitic Stainless Steel, They Suit Outdoor, Damp Or Corrosive Environments, While The Countersunk Head Provides A Flush Finish In Pre-Countersunk Holes. The 60° Self-Tapping Thread Supports Reliable Insertion Into Sheet Metal And Similar Applications.
£1.58 - £11.10
-
TIMCO Timco Metal Tapping Screws Steel, Zinc, Lime, Clear
Metal Tapping Screws - PZ - Countersunk - Self-Tapping - ZincUsed For Stitching Metal Or Attaching Fixtures To Metal, These PZ Countersunk Self Tapping Screws Require A Pre Drilled Hole And Sit Flush In Pre Countersunk Applications. Manufactured From Carbon Steel With A Zinc & Clear Cr3 Finish, They Feature A 60° Self Tapping Thread For Reliable Insertion And Are Made To BS 4174:1972.
£1.68 - £5.44
-
TIMCO Timco Metal Tapping Screws Stainless Steel, Steel, Lime
Metal Tapping Screws - PZ - Flange - Self-Tapping - A2 Stainless SteelThese TIMCO Metal Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Used. The A2-304 Austenitic Stainless Steel Construction Provides Corrosion Resistance For Outdoor Or Aggressive Environments, While The Flange Head Improves Clamping And Finish. A 60° Self-Tapping Thread Supports Reliable Insertion Into Suitable Metal Applications.
£3.98 - £5.28
-
TIMCO TIMCO Self-Tapping Metal Screws Mixed Tray PZ Zinc Carbon AB (STSTRAY)
Metal Tapping Screws - Mixed Tray - PZ - Self-Tapping - ZincMixed Tray Of TIMCO Metal Tapping Screws For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. Includes Pan, Countersunk And Flange Head Options With PZ Drive, A 60 Degree Self-Tapping Thread And AB Point For Consistent Insertion. Carbon Steel Construction With Zinc And Clear Cr3 Finish, Manufactured To BS 4174:1972.
£22.79
-
TIMCO Timco Metal Tapping Screws Stainless Steel, Steel, Lime
Metal Tapping Screws PZ Pan Self Tapping A2 Stainless SteelThese PZ Pan Head Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Substrates Where A Pre-Drilled Hole Is Available. The Pan Head Provides Improved Clamping, While The A2-304 Austenitic Stainless Steel Construction Supports Outdoor And Corrosive Environments. A 60° Self-Tapping Thread Helps Form A Secure Fixing During Installation.
£1.54 - £12.43
-
TIMCO Timco Metal Tapping Screws Steel, Zinc, Lime, Clear
Metal Tapping Screws - PZ - Flange - Self-Tapping - ZincThese TIMCO Metal Tapping Screws Are Designed For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The 60° Self-Tapping Thread Supports Clean Insertion, While The Flange Head Improves Clamp Load And Provides A Neat Finish. Manufactured From Zinc And Clear Cr3 Carbon Steel To BS 4174:1972 For Reliable General Metalwork Applications.
£1.79 - £3.63
-
TIMCO TIMCO Mixed Self-Tapping Screws Tray Zinc (TRAY440)
Mixed Tray - Self-Tapping Screws - ZincThis TIMCO Mixed Tray Provides A Practical Assortment Of Zinc Plated Self Tapping Screws For Metal To Metal Fixing. Supplied With Three Head Types, It Supports General Fabrication, Repairs, Installation Work, And Maintenance Tasks. Designed For Use With A Pre Drilled Pilot Hole, The Zinc Finish Helps Improve Corrosion Resistance In Indoor And Dry Trade Environments.
£8.28
-
TIMCO Timco Metal Tapping Screws Steel, Zinc, Lime, Clear
Metal Tapping Screws - PZ - Pan - Self-Tapping - ZincThese TIMCO Metal Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The Pan Head Provides Improved Clamping, While Carbon Steel Construction With A Zinc And Clear Cr3 Finish Supports Corrosion Resistance. A 60° Self-Tapping Thread Aids Insertion, Manufactured To BS 4174:1972.
£1.13 - £6.82
-
TIMCO Timco Metal Construction Timber To Light Section Screws Steel, Zinc, Lime
Metal Construction Timber To Light Section Screws - Countersunk - Wing-Tip - Self-Drilling - ZincDesigned For Fixing Timber To Light Section Steel Up To 3mm, These TIMCO Countersunk Wing Tip Screws Use A Coarse Self Tapping Thread And Self Drilling Point For Fast Installation. The Wings Ream The Timber To Reduce Heat Build Up, Then Break Off On Contact With Metal To Allow Secure Thread Formation. Zinc Finish Supports Roofing, Cladding And Construction Applications.
£5.31 - £17.83
-
TIMCO Timco Metal Construction Timber To Light Section Screws Steel, Silver, Lime
Metal Construction Timber To Light Section Screws - Countersunk - Wing-Tip - Self-Drilling - Exterior - Silver OrganicTIMCO Metal Construction Screws Are Designed For Fixing Timber To Light Section Steel Up To 3mm. The Countersunk Wing-Tip Drills Through Timber Without Burning, Then The Wings Break On Contact With Steel To Allow The Coarse Self-Tapping Thread To Secure Into Metal. Made From Case And Core Hardened Carbon Steel With Silver Organic Exterior Plating, They Provide Durable Corrosion Resistance For Roofing And Construction Applications.
£7.57 - £13.68
-
TIMCO Timco Self-Tapping Screws Steel, Zinc, Lime, Clear
Self-Tapping Screws - PZ - Pan - ZincSelf-Tapping Screws With A PZ Pan Head For Stitching Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Used. Manufactured From Carbon Steel With A Zinc And Clear Cr3 Finish, They Feature A 60 Degree Self-Tapping Thread For Reliable Insertion And A Pan Head To Improve Clamping. Manufactured To BS 4174:1972.
£1.03 - £6.30
-
TIMCO Timco Self-Tapping Screws Steel, Zinc, Clear
Self-Tapping Screws - PZ - Flange Head - ZincThese TIMCO Self-Tapping Screws Are Designed For Stitching Metal Sheets Or Fixing Components To Metal Where A Pre-Drilled Hole Is Used. Made From Carbon Steel With A Zinc & Clear Cr3 Finish, They Offer Corrosion Resistance For General Construction Use. The Flange Head Provides Wider Clamping Cover, While The 60° Thread Supports Easier Insertion To BS 4174:1972.
£1.03
-
TIMCO Timco Self-Tapping Screws Steel, Zinc, Lime, Clear
Self-Tapping Screws - PZ - Countersunk - ZincThese TIMCO Carbon Steel Self-Tapping Screws Are Designed For Stitching Sheet Metal Or Fixing Components To Metal Where A Pre-Drilled Hole Is Required. The PZ Countersunk Head Sits Flush In Prepared Countersinks, While The 60 Degree Thread Supports Easy Insertion. A Zinc And Clear Cr3 Finish Provides Corrosion Resistance, With Manufacture To BS 4174:1972.
£1.03 - £5.44
