Wire Hole Cleaning BrushesWire Hole Cleaning Brushes Are Designed To Remove Dust And Debris From Drilled Holes Before Resin Injection Or Mechanical Anchor Installation. Effective Hole Cleaning Is Essential For Safe Fixing Performance, Helping Improve Bond Strength And Anchor Reliability In Masonry, Concrete And Cavity Applications. Suitable For Trade And DIY Use With Resin Fixing Systems.
Blow-Out PumpThis TIMCO Blow-Out Pump Is Designed For Hole Debris Removal Before Resin Injection Or Mechanical Anchor Installation. It Clears Dust And Loose Material From Drilled Masonry Holes, Helping Improve Bond Strength, Anchor Seating And Fixing Reliability. Suitable For Site, Trade And Maintenance Use, It Supports Correct Drill Hole Preparation Where Safe Fixing Performance Depends On A Clean Substrate.
Economy PU Foam Applicator GunThe Economy PU Foam Applicator Gun Is Built For Controlled Application Of Expanding Foam In Gaps, Cavities And Deep Voids. It Features A Lightweight Polypropylene Body, Steel Barrel, Brass Needle And Ergonomic Grip For Practical Site Use. Stainless Steel Internals And A Stainless Steel Non Return Valve Support Reliable Flow Control, With Compatibility For 750ml And 500ml PU Foam Canisters And Foam Cleaners.
PU Foam Applicator GunDesigned For Controlled Application Of Gun Grade PU Foam, This Applicator Gun Fits Standard 750ml And 500ml Canisters. A Heavy Duty Steel Body, Polypropylene Hand Grip And Lubricated Trigger Support Accurate Foam Flow For Sealing, Filling And Insulating Gaps. The Stainless Steel Non Blocking Valve Helps Reduce Curing Inside The Gun, With Extension Tubes And Tapered Nozzles For Longer Reach And Small Voids.
Professional PU Foam Applicator GunThe TIMCO Professional PU Foam Applicator Gun Is Designed For Controlled Application Of Gun Grade Expanding Foam From 750ml And 500ml Canisters. Its Lightweight Aluminium Body, Soft Touch Grip And Anti Stick PTFE Coating Support Accurate Filling And Sealing Of Cavities, Gaps And Service Penetrations. A Lubricated PTFE Coated Valve Helps Maintain An Air Tight Seal, With Extension Tubes And Tapered Nozzles For Restricted Areas.
Skeleton GunA 48mm Skeleton Gun For Dispensing Sealants, Caulk And Adhesives In Trade And DIY Applications. Built With 2.3mm Strengthened Side Plates And A 6mm Gripper Plate, It Provides Controlled Cartridge Pressure With A 7:1 Trigger Ratio. The Riveted Front Cap, Integrated Cleaning Pin, Hook End And 380ml Cartridge Capacity Support Practical Site Use.
Professional Sealant GunThe TIMCO Professional Sealant Gun Is A 48mm Heavy Duty Applicator For Sealants, Caulks And Resin Cartridges. Its Swivel Action Barrel Supports Controlled Application In Tight Corners, While The Patented Non Drip Mechanism Helps Reduce Waste. A 12:1 Trigger Ratio, Hook End For Storage And Approximate 820g Weight Make It Suitable For Trade And DIY Use.
Professional Resin GunThe TIMCO Professional Resin Gun Is A Heavy Duty, Co Axial Applicator For Accurate Dispensing Of 410ml Chemical Resin Cartridges In Masonry And Fixing Work. Its 64mm Cartridge Capacity, Twin 5mm Gripper Plates And Four Point Plunger Contact Support Controlled Application, While The 25:1 Trigger Ratio And Non Drip Mechanism Help Reduce Waste On Site.
Professional Foil & Cartridge Applicator Gun - 400ml & 380mlThis Professional Applicator Gun Is Designed For Controlled Adhesive And Sealant Application In Trade And Site Use. The 1.5mm Heavy Gauge Aluminium Barrel Accepts 400ml Foils And 380ml Plastic Cartridges, While The 16:1 Trigger Ratio Supports Fast Flow. A Reinforced Steel Mechanism, Ergonomic Grip And Non Drip Release Paddle Improve Accuracy, Comfort And Clean Finishing On Masonry, Fixing And General Construction Jobs.
PE Chemical ResinTIMCO PE Chemical Resin Is A Two Component Polyester Resin Supplied Ready To Use With A Mixing Nozzle. Designed For Solid And Hollow Masonry, It Is Suitable For Day To Day Non Safety Critical Fixing In Well Ventilated Areas. The Low Extrusion Force Formula Supports Controlled Application, Reduced Wastage, No Leakage, And Closer Edge And Axial Spacing.
PESF Styrene Free Chemical ResinTIMCO PESF Is A Styrene Free Polyester Resin For Day To Day Non Safety Critical Fixing In Solid And Hollow Masonry. The Two Component Formula Mixes In The Nozzle For Clean Application, With Low Extrusion Force, Reduced Leakage And Less Waste. ETA Approved And Low Odour, It Is Suitable For Enclosed Or Poorly Ventilated Areas, With Fire Rated Performance And Close Edge Or Axial Spacing.
VESF Vinylester SF Chemical ResinVESF Vinylester Styrene Free Chemical Resin Is A Rapid Curing, Two Component Resin For Safety Critical Fixing In Solid And Hollow Masonry. ETA Approved And Fire Rated, It Is Suitable For Enclosed, Damp Or Wet Areas, With Low Odour, Low Extrusion Force And A Mixing Nozzle Included For Controlled Application.
Chemical Anchor Threaded Studs, Nuts & Washers - ZincChemical Anchor Threaded Studs For Use With Chemical Resin Fixings In Masonry And Concrete Applications. Manufactured From Grade 5.8 Carbon Steel With A Zinc Finish, They Include Nuts, Washers And A Nut Setter. The Chisel Point Helps Prevent Rod Rotation During Tightening, While The External Hex Drive And Embedment Depth Mark Support Accurate Installation.
Chemical Anchor Threaded Studs, Nuts & Washers - Hot Dipped GalvanisedDesigned For Secure Fixing With Chemical Resins In Masonry And Concrete, These Threaded Anchor Studs Include Nuts, Washers And A Nut Setter. The Hot Dipped Galvanised Finish Supports External Use, While Grade 5.8 Carbon Steel Provides Reliable Strength. A Chisel Point Helps Prevent Rotation During Tightening, With An External Hex Drive And Embedment Depth Mark For Accurate Installation.
Forged Hooks - YellowTIMCO Forged Hooks Are Threaded Hook Bolts For Securing Ropes Or Cables Into Masonry And Concrete Shield Anchor Applications. Manufactured From Carbon Steel Using A Forging Process, The Hook Resists Opening Under Load. The Zinc And Yellow Passivated Finish Improves Corrosion Resistance, With Grade 4.8 Strength For Reliable Fixing. Supplied As Hooks Only, Without Shield Anchors.
Forged Eyes - YellowThese Forged Eyes Provide A Threaded Eye Bolt Fixing For Attaching Ropes, Cables And Restraints To Compatible Shield Anchors In Masonry Or Concrete Applications. Manufactured From Carbon Steel Using A Forging Process For Added Strength, They Feature A Zinc And Yellow Passivated Finish For Improved Corrosion Resistance And Are Grade 4.8 Rated. Supplied As Eyes Only, Without Shield Anchors.
Shield Anchor - Loose Bolts - YellowTIMCO Shield Anchor Loose Bolts Are Designed For Through Fixing Into Concrete, Brick And Stone After The Shield Is Set In The Substrate. The Three Segmented Expansion Anchor Provides Torque Controlled Holding Performance, With A Zinc & Yellow Finish And Carbon Steel Grade 8.8 Bolt Construction For Secure Metric Threaded Fixings In Masonry And Structural Applications.
Shield Anchor - Projecting Bolts - YellowA Carbon Steel Shield Anchor With Projecting Bolt For Securing Fixtures Into Concrete, Brick Or Stone. The Projecting Stud Allows The Fixture To Be Positioned Before Final Tightening, While The Three Segmented Expansion Shield Provides A Torque Controlled Fixing. Finished In Zinc And Yellow For Corrosion Resistance, It Is Compatible With Most Metric Threaded Components And Uses Grade 5.8 Stud Strength For General Masonry Applications.
Shield Only - YellowThis Shield Only Anchor Is Designed For Attaching Metric Threaded Fixings Such As Hooks, Eyes And Studs Into Concrete, Brick Or Stone. Manufactured From Carbon Steel With A Zinc & Yellow Finish, It Uses A Three Segmented Expansion Design For Torque Controlled Installation And Reliable Holding In Masonry Applications.
Drop In Anchors Setting Tool - YellowThis Carbon Steel Setting Tool Is Designed For Installing Standard And Lipped Drop In Anchors In Masonry And Concrete. The Yellow Tool Provides Controlled Expansion Of The Anchor During Setting, Helping Achieve A Secure Fixing For Threaded Rod, Studding, Brackets, And General Fastening Applications. Finished In Zinc And Yellow For Corrosion Resistance.
Lipped Drop In Anchors - ZincThese Internally Threaded Drop In Anchors Are Hammer Set Expansion Fixings For Heavy Duty Anchoring Into Concrete. Made From Zinc Finished Carbon Steel, The Lipped Design Sits Flush To The Surface And Helps Prevent Over Insertion. Suitable For Mechanical, Electrical And Construction Installations, They Provide An All Steel, Non-Flammable Fixing In Support Of BS 7671 18th Edition Wiring System Requirements.
Drop In Anchors - ZincDesigned For Heavy Duty Fixing Into Concrete, These Internally Threaded Drop In Anchors Use A Hammer Set Expansion Mechanism For Secure Load Bearing Installation. The Carbon Steel, Zinc Finished Body Provides Durable Performance For Construction, Electrical Containment And Mechanical Supports. Suitable For Setting Below The Surface, This All Steel Non Flammable Fixing Supports BS 7671 18th Edition Compliance Where Wiring Systems Must Resist Premature Collapse In Fire Conditions.
Multi-Fix Masonry Bolts - Pan - Exterior - SilverThese TIMCO Multi-Fix Masonry Bolts Provide A Stress Free, Non-Expansion Through Fixing For Heavy Duty Anchoring Into Concrete, Brick, Stone, Wood And Concrete Block. The Pan Head Improves Clamping, While High-Low Parallel Threads And A Concave Thread Form Support Fast Insertion And High Pull-Out Performance. Supplied In A Silver Exterior Organic Finish, The All-Steel Fixing Is Removable, Adjustable And Suitable For Fire-Resistant Installations To BS 7671 18th Edition.
Multi-Fix Masonry Bolts - Countersunk - Exterior - SilverThese TIMCO Multi-Fix Countersunk Masonry Bolts Provide A Stress Free, Non Expansion Through Fixing For Concrete, Brick, Stone, Wood And Concrete Block. The Exterior Silver Organic Finish Improves Corrosion Resistance, While High Low Parallel Threads Support Fast Installation And High Pull Out Values. The All Steel, Non Flammable Fixing Is Removable, Adjustable And Suitable For Flush, Pre Countersunk Applications.
Discover our full collection of New Arrivals at Fixings2Go. This is where every fresh line lands first. As we grow the range across fixings hardware tools and site supplies the newest products from brands like TIMCO and Bosch appear here before they settle into their permanent categories.
The mix changes constantly which is exactly the point. One week brings new door furniture finishes and gate hardware the next adds drill sets nails in fresh pack sizes or ironmongery patterns customers have asked for. Checking back regularly is the easiest way to catch additions relevant to your trade the moment they hit the shelves.
Frequently Asked Questions
How often do new products arrive?
Continuously. We add lines throughout the year as brands release new products and as customer requests shape what we stock so this page rarely looks the same twice.
Are new arrivals full price?
New lines launch at our normal trade prices. Keep an eye on our promotions pages for launch offers and bundles across the wider store.
Why shop New Arrivals at Fixings2Go?
Because the newest trade products reach you here first backed by the same trade prices and fast UK delivery as everything else we sell.
Need More Help Choosing from our New Arrivals?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
