Professional Masonry BitProfessional Masonry Bit For Accurate Drilling In Brick, Block, Stone And General Masonry Using Cordless Or Corded Drill Drivers In Rotary Or Hammer Action. Manufactured From Hardened Carbon Steel With A 130° Industrial Carbide Tip, Ground Flute, Heat Treated Body And Silver And Black Finish For Efficient Dust Clearance And Reliable Site Use.
SDS Plus Rebar Cutter - One PieceDesigned For Drilling In Situ Reinforcing Bars Embedded In Concrete, This One Piece SDS Plus Rebar Cutter Fits Standard SDS Plus Fitment Hammer Machines For Rotary Mode Only. Heavy Duty Tungsten Carbide Tips And Heat Treated Construction Support Accurate Cutting Through Rebar, While The Convenient Slot Aids Debris Clearance During Controlled Masonry Work.
Adaptor For Rebar Cutter HeadsThis TIMCO Adaptor Is Designed For Use With 22mm And Above Rebar Cutter Heads, Providing The Correct Connection For Rebar Cutting Applications In Reinforced Concrete Drilling. Suitable For Trade And Site Use, It Supports Accurate Cutter Head Fitment And Must Be Operated In Rotary Mode Only For Correct Performance.
Rebar Cutter - Head OnlyThe TIMCO Rebar Cutter Head Is Designed For Use With A Compatible Rebar Adaptor To Drill Through In-Situ Rebar During Reinforced Concrete Drilling. Supplied As A Head Only, It Provides A Practical Solution For Site Work Where Steel Reinforcement Is Encountered. Use In Rotary Mode Only To Protect The Cutter And Maintain Controlled Drilling Performance.
SDS Shank Rebar Cutters CompleteTIMCO SDS Shank Rebar Cutters Are Designed For Drilling Through In Situ Rebar When Working In Concrete With SDS Plus Machines Set To Rotary Mode Only. The Heavy Duty Tungsten Carbide Tip And High Temperature Brazed Construction Support Accurate Cutting, While Hammer Action Must Remain Switched Off To Prevent Tool Damage.
SDS Max Steels Slotting ToolDesigned For Use With SDS Max Shank Tools, This Slotting Tool Removes Mortar From Brickwork Before Repointing. The SDS Max Fitting Provides Secure Tool Engagement For Heavy Duty Masonry Preparation, While The Chisel Profile Supports Controlled Joint Clearance. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - Extra Wide ChiselDesigned For Use With SDS Max Shank Demolition Tools, This Extra Wide Chisel Is Suited To Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Supports Chipping And Chiselling Of Tile, Mortar, Old Plaster And Rendering, Providing Broad Surface Removal On Masonry Materials. Use In Hammer Only Mode, Not Rotary Mode, For Correct Operation.
SDS Max Steels - Wide ChiselThis Wide Chisel Is Designed For SDS Max Shank Breakers And Demolition Hammers, Providing Controlled Heavy Duty Breaking, Chipping And Chiselling In Concrete, Masonry, Brick And Stone. Suitable For Tile Removal, Mortar Raking, Old Plaster And Rendering Work. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Steels - ChiselDesigned For Use With SDS Max Shank Breakers, This Chisel Supports Heavy Duty Breaking Of Concrete, Masonry, Brick And Stone. It Is Also Suitable For Chipping And Chiselling Tiles, Mortar, Old Plaster And Rendering, Providing A Practical Accessory For Building, Refurbishment And Demolition Work. For Non Rotary Use Only.
SDS Max Steels - PointThis SDS Max Point Steel Is Designed For Use With SDS Max Shank Tools For Heavy Duty Breaking, Chiselling And Demolition Work In Concrete And Masonry. The Pointed Tip Helps Concentrate Impact Force For Effective Material Breakout In Site, Trade And Maintenance Applications. For Hammer Action Use Only, Not For Rotary Mode.
SDS Max Hammer BitThe TIMCO SDS Max Hammer Bit Is Designed For Drilling Large Diameter Holes In Concrete, Stone And Masonry Using Rotary Hammers With An SDS Max Tool Holder. Its Narrow Angle 4 Cutter Head Helps Reduce Jamming For Smoother Drilling, While The Shot Peened Body Adds Strength And Durability. A Tungsten Carbide Tip Supports Reliable Cutting Performance In Demanding Masonry Applications.
SDS Plus Steels - GougeThis TIMCO SDS Plus Gouge Is Designed For Rotation Stop Hammers With The SDS Plus Tool Holder System. It Is Used To Remove Mortar From Brickwork Before Repointing, Providing Controlled Chiselling For Masonry Preparation. The Heat Treated Steel Construction And Shot Blast Finish Help Improve Durability And Rust Protection. Not For Use In Rotary Mode.
SDS Plus Steels - TileTIMCO SDS Plus Tile Steel For Use With Rotation Stop Hammers And SDS Plus Tool Holder Systems. The Angled Head Supports Controlled Removal Of Tiles, Plaster And Rendering, While Heat Treatment Improves Durability For Site Use. A Shot Blast Finish Helps Reduce Rust, And The Tool Must Not Be Used In Rotary Mode.
SDS Plus Steels - SpadeDesigned For Use With Rotation Stop Hammers And The SDS Plus Tool Holder System, This Spade Steel Is Suited To Breaking Concrete And Masonry, Plus Removing Plaster Or Rendering. Heat Treated Construction Supports Impact Durability, While The Shot Blast Finish Helps Improve Rust Protection. Not Suitable For Use In Rotary Mode.
SDS Plus Steels - ChiselThis SDS Plus Chisel Is Designed For Use With Rotation Stop Hammers Fitted With The SDS Plus Tool Holder System. Suitable For Breaking Concrete And Masonry, It Also Removes Plaster And Rendering During Renovation Or Site Preparation Work. The Steel Is Heat Treated For Durability, With A Shot Blast Finish For Rust Protection. Not For Use In Rotary Mode.
SDS Plus Steels - PointDesigned For Use In Rotation Stop Hammers With The SDS Plus Tool Holder System, This Point Steel Is Suitable For Breaking Up Concrete, Brickwork And Masonry During Chasing, Demolition And Preparation Work. The Heat Treated Construction Supports Durability, While The Shot Blast Finish Helps Improve Rust Protection. Use Only In Hammer Or Rotation Stop Mode, Not Rotary Mode.
SDS Plus Hammer BitThe TIMCO SDS Plus Hammer Bit Is Designed For Rotary Hammers Using The SDS Plus Tool System, Providing Reliable Drilling In Masonry And Trade Applications. Fully Heat Treated Construction Helps Reduce Bending Under Load, While A Shot Blast Finish Improves Rust Protection. Available Across Popular Sizes Up To 600mm Length, It Offers A Practical, Cost Effective Choice For Site And Workshop Use.
Professional SDS Plus Drill Bit SetThis SDS Plus Drill Bit Set Is Designed For Accurate Drilling In Concrete And Masonry For Plastic Plug And Fixing Applications. German Tested And PGM Approved, Each Bit Uses A Nickel Chromoly Shank, BC20 Tungsten Carbide Tip, Twin Flute Geometry, Full Heat Treatment And Shot Peening For Strength, Durability And Reduced Bending.
Professional SDS Plus Hammer BitTIMCO Professional SDS Plus Hammer Bit For Accurate Drilling In Concrete And Masonry. Built With A BC20 Tungsten Carbide Tip And Nickel Chromoly Shank, It Offers High Wear Resistance For Hammer Drilling. The Twin Flute Design Improves Dust Clearance, While Heat Treated And Shot Peened Construction Helps Reduce Bending. PGM Approved For Dimensional Precision, Suitable For Direct Fix Anchors And General Site Fixings.
Cladding Pin - A4 Stainless SteelThese A4 Stainless Steel Cladding Pins Are Designed For Fixing Timber Cladding, Trim And External Boards Where Corrosion Resistance Is Required. The A4 316 Austenitic Stainless Steel Construction Supports Use In Coastal Or Exposed Locations, While The Ring Shank Helps Improve Grip And Pull Out Resistance For A Secure, Impact Resistant Fixing.
Polymer Headed Pins - A4 Stainless Steel - BlackDesigned For Fixing Soffits, Fascias, Roofline Trims And Other Visible Finishing Applications, These Black Polymer Headed Pins Combine A Neat Appearance With Reliable Outdoor Performance. The A4 316 Stainless Steel Shank Provides Corrosion Resistance, While The UV Stable, Impact Resistant Polymer Head Helps Maintain A Clean Finish In Exposed Installations.
Polymer Headed Pins - A4 Stainless Steel - Anthracite GreyThese Polymer Headed Pins Use A4 316 Austenitic Stainless Steel For Corrosion Resistance In Exposed Roofline Applications. The Anthracite Grey Polymer Head Is UV Stable And Impact Resistant, Providing A Neat Colour-Matched Fixing For Soffits, Fascias, Trims And Other Visible Exterior Installations.
Polymer Headed Pins - A4 Stainless Steel - OakThese Polymer Headed Pins Use A4 316 Austenitic Stainless Steel For Durable Fixing In Exposed Roofline Applications. The Oak Polymer Head Provides A Neat Finish For Soffits, Fascias, Trims And Other Visible Fixing Points, While UV Stable And Impact Resistant Construction Helps Maintain Appearance And Holding Performance Outdoors.
Polymer Headed Pins - A4 Stainless Steel - Clay BrownThese Clay Brown Polymer Headed Pins Use A4 316 Austenitic Stainless Steel For Excellent Corrosion Resistance In Exposed Roofline Applications. The UV Stable And Impact Resistant Polymer Head Provides A Neat Colour Matched Finish For Fixing Soffits, Fascias, Trims And Other Visible Exterior Components Where Aesthetic, Durable Fixings Are Required.
Discover our full collection of New Arrivals at Fixings2Go. This is where every fresh line lands first. As we grow the range across fixings hardware tools and site supplies the newest products from brands like TIMCO and Bosch appear here before they settle into their permanent categories.
The mix changes constantly which is exactly the point. One week brings new door furniture finishes and gate hardware the next adds drill sets nails in fresh pack sizes or ironmongery patterns customers have asked for. Checking back regularly is the easiest way to catch additions relevant to your trade the moment they hit the shelves.
Frequently Asked Questions
How often do new products arrive?
Continuously. We add lines throughout the year as brands release new products and as customer requests shape what we stock so this page rarely looks the same twice.
Are new arrivals full price?
New lines launch at our normal trade prices. Keep an eye on our promotions pages for launch offers and bundles across the wider store.
Why shop New Arrivals at Fixings2Go?
Because the newest trade products reach you here first backed by the same trade prices and fast UK delivery as everything else we sell.
Need More Help Choosing from our New Arrivals?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
