Impact Driver Bits - TXThese Hardened Carbon Steel TX Impact Driver Bits Are Designed For High Torque Impact Drivers, Providing Controlled Flex To Absorb Torque Peaks During Fixing. A Newly Developed Heat Treatment Reduces Body Hardness For Load Resistance, While The Black Phosphate Finish Helps Improve Corrosion Protection. Suitable For Trade And DIY Torx Fastening In Timber, Metal And General Construction Applications.
Impact Driver Bits - PZ - Double EndedThese TIMCO PZ Double Ended Impact Driver Bits Are Manufactured From Hardened Carbon Steel For Demanding Impact Driving In Trade And DIY Applications. A Dedicated Torsion Zone Absorbs Sudden Rotational And Downward Forces, While Reduced Body Hardness Helps Withstand High Load Use. The Black Phosphate Finish Improves Corrosion Resistance For Reliable Fastening With Impact Drivers.
1/2" Chuck SDS Plus AdaptorThis TIMCO SDS Plus To 1/2 Inch Chuck Adaptor Is Manufactured From Carbon Steel For Reliable Strength When Connecting Standard Drill Chucks To SDS Plus Machines. It Provides A Practical Interface For Using Compatible Chuck Accessories And Straight Shank Drill Bits In General Drilling Tasks, Helping Convert An SDS Plus Tool For Wider Site And Workshop Applications.
Chuck KeyTIMCO Chuck Key Designed As A Direct Replacement For Traditional 1/2" Keyed Chuck Systems Used On Compatible Drills And Power Tools. Manufactured From Carbon Steel For Durable Engagement With The Chuck Gear, It Provides Reliable Torque Transfer For Tightening And Releasing Drill Bits In Workshop, Site, Maintenance And General Trade Applications.
1/2" Chuck, Key & SDS Plus Adaptor SetThis Carbon Steel Keyed Chuck Is Designed For Drills With A 1/2" Shaft And Is Supplied With A Chuck Key And SDS Plus Adaptor. Suitable For 1.5mm To 13mm Drill Bits, It Provides A Practical Conversion Solution For General Drilling, Site Work, Maintenance, And Workshop Applications.
1/2" Chuck & Key SetA Traditional Keyed Chuck And Key Set For Drills With A 1/2" Shaft, Providing Secure Bit Retention For General Drilling, Workshop, And Site Use. Manufactured From Carbon Steel, It Accepts 1.5mm To 13mm Drill Bits And Is Suitable For Replacing Worn Chucks Or Equipping Compatible Corded And Cordless Drills.
1/2" Keyless Chuck & SDS Plus Adaptor SetThis TIMCO Keyless Chuck And SDS Plus Adaptor Set Converts SDS Plus Rotary Hammer Drills For Standard Round Shank Drill Bits. The Hand Tightened Three Jaw Chuck Fits A 1/2" Shaft And Accepts 1.5mm To 13mm Drill Bits, With Carbon Steel Construction For General Drilling Applications On Impact Drills Up To 750W.
Single Handed Keyless ChuckThis TIMCO Single Handed Keyless Chuck Provides Fast, Tool Free Bit Changes For Drilling Applications. The Three Jaw Carbon Steel Design Fits Drills With A 1/2 Inch Shaft And Securely Holds 1.5mm To 13mm Drill Bits. Suitable For Impact Drills Up To 750 Watt, It Is A Practical Replacement Or Upgrade Chuck For Trade And DIY Power Tool Use.
Super Heavy Duty ChuckThis Carbon Steel Keyless Heavy Duty Three Jaw Chuck Is Designed For Hand Tightened Bit Changes On Compatible Drills With A 1/2" Shaft. Suitable For Impact Drills Up To 1,000 Watt, It Provides Secure Holding For 1.5mm To 13mm Drill Bits, Making It Practical For Trade And General Drilling Applications.
Heavy Duty Keyless ChuckA Keyless, Hand Tightened Three Jaw Chuck Designed For Drills With A 1/2 Inch Shaft. Made From Carbon Steel For Durable Workshop Use, It Is Suitable For Impact Drills Up To 750W And Accepts 1.5mm To 13mm Drill Bits. A Practical Replacement Or Upgrade Chuck For General Drilling, Trade Maintenance And Site Applications.
Drill Wheel Brush - Twisted Knot Steel WireThis Twisted Knot Steel Wire Wheel Brush Is Designed For Drill Use Where Aggressive Surface Preparation Is Required. Made From Carbon Steel, It Is Suitable For Removing Paint, Rust, Rubber, Concrete Residue And Dirt From Metal, Masonry And Other Robust Surfaces In Trade Or DIY Applications.
Drill End Brush - Crimped Steel WireThe TIMCO Drill End Brush Uses Crimped Steel Wire For Controlled Surface Preparation In Drills. Made From Carbon Steel, It Is Suitable For Light Removal Of Loose Paint, Rust And Dirt From Metal, Timber Or Masonry Surfaces, Helping Clean Edges, Corners And Recesses Without Heavy Scarring Of The Base Material.
Drill Wheel Brush - Crimped Steel WireThis Crimped Steel Wire Wheel Brush Is Designed For Use With Drills To Lightly Remove Loose Paint, Rust, Dirt And Surface Contamination. Manufactured From Carbon Steel, It Provides Controlled Abrasion For Metal Preparation, Cleaning And Refurbishment Without Excessive Scarring Of The Base Material.
Drill Cup Brush - Crimped Steel WireThis Carbon Steel Drill Cup Brush Uses Crimped Steel Wire For Controlled Surface Preparation With Compatible Power Drills. It Is Suitable For Light Removal Of Loose Paint, Rust And Dirt From Metal, Timber Or General Workshop Materials, Helping Clean The Surface Without Excessive Scarring Of The Base Material.
Drill Wheel Brush - NylonThe Nylon Wheel Brush is a drill-mounted abrasive accessory for light de-burring, polishing and finishing on metal, plastic, timber and coated surfaces. Its less aggressive nylon construction helps remove light marks, surface residue and burrs while reducing the risk of gouging, making it suitable for maintenance, fabrication and preparation work.
Drill Cup Brush - NylonThis Drill Cup Brush Uses Nylon Bristles For Controlled Surface Preparation Where Wire Brushes May Be Too Aggressive. Suitable For Light Deburring, Polishing And Finishing On Metals, Plastics And Coated Surfaces, It Fits Standard Drill Use For Workshop, Site And Maintenance Tasks Requiring Consistent Abrasion With Reduced Risk Of Marking.
Wheel Brush - Twisted Knot Steel WireThis Twisted Knot Steel Wire Wheel Brush Is Designed For Aggressive Surface Preparation On Metal, Masonry And Hard Materials. Made From Carbon Steel, It Removes Paint, Rust, Rubber, Concrete And Dirt, While The Wheel Format Helps Reach Awkward Areas. Suitable For Bench Grinder Applications In Trade, Workshop And Maintenance Use.
Angle Grinder Wheel Brush - Twisted Knot Stainless SteelThis Twisted Knot Stainless Steel Wheel Brush Is Designed For Use With Angle Grinders Where Aggressive Surface Preparation Is Required. The 0.5mm A2 304 Stainless Steel Wire Removes Paint, Rust, Rubber, Concrete And Dirt, While Helping Reduce Cross Contamination On Stainless Base Materials. A Removable Metal Ring Supports Longer Service Life During Heavy Duty Cleaning And Deburring.
Angle Grinder Wheel Brush - Twisted Knot Steel WireDesigned For Use With Angle Grinders, This Twisted Knot Wheel Brush Uses 0.5mm Twisted Knot Steel Wire For Aggressive Surface Preparation On Metal, Masonry And Hard Materials. The Carbon Steel Construction Supports Removal Of Paint, Rust, Rubber, Concrete And Dirt, While The Removable Metal Ring Helps Extend Brush Usage Life During Heavy Duty Cleaning Tasks.
Angle Grinder Bevel Brush - Twisted Knot Stainless SteelThis Angle Grinder Bevel Brush Uses 0.5mm Twisted Stainless Steel Wire For Aggressive Removal Of Paint, Rust, Rubber, Concrete And Dirt. The A2 304 Austenitic Stainless Steel Construction Helps Reduce Cross Contamination When Cleaning Base Materials, While The Removable Metal Ring Extends Usable Brush Life.
Angle Grinder Bevel Brush - Twisted Knot Steel WireDesigned For Use With Angle Grinders, This Bevel Brush Uses 0.5mm Twisted Steel Wire For Aggressive Surface Preparation And Material Removal. The Carbon Steel Construction Is Suitable For Removing Paint, Rust, Rubber, Concrete And Dirt, With A Removable Metal Ring To Extend Brush Usage Life During Heavy Duty Applications.
Angle Grinder Cup Brush - Twisted Knot Stainless SteelThis TIMCO Cup Brush Is Designed For Angle Grinders, Using 0.5mm Twisted Knot A2-304 Stainless Steel Wire For Aggressive Removal Of Paint, Rust, Rubber, Concrete And Dirt. The Stainless Steel Construction Helps Reduce Cross Contamination On Base Materials, While The Removable Metal Ring Extends Usable Brush Life During Heavy Duty Surface Preparation.
Angle Grinder Cup Brush - Twisted Knot Steel WireThis Carbon Steel Twisted Knot Cup Brush Is Designed For Use With Angle Grinders, Providing Aggressive Surface Preparation On Metal, Masonry And Hard Materials. The 0.5mm Steel Wire Supports Fast Removal Of Paint, Rust, Rubber, Concrete Residue And Dirt, While The Removable Metal Ring Helps Extend Working Life As The Brush Wears.
Wheel Brush With Plastic Reducer Set - Crimped Steel WireThis Crimped Steel Wire Wheel Brush Is Designed For Bench Grinder Use, Lightly Removing Loose Paint, Rust And Dirt While Helping Reduce Scarring To The Base Material. Supplied With Plastic Reducing Bushes To Adapt The 32mm Bore To 25mm, 22mm, 20mm, 16mm And 12mm, It Suits Workshop, Maintenance And Surface Preparation Tasks.
Discover our full collection of New Arrivals at Fixings2Go. This is where every fresh line lands first. As we grow the range across fixings hardware tools and site supplies the newest products from brands like TIMCO and Bosch appear here before they settle into their permanent categories.
The mix changes constantly which is exactly the point. One week brings new door furniture finishes and gate hardware the next adds drill sets nails in fresh pack sizes or ironmongery patterns customers have asked for. Checking back regularly is the easiest way to catch additions relevant to your trade the moment they hit the shelves.
Frequently Asked Questions
How often do new products arrive?
Continuously. We add lines throughout the year as brands release new products and as customer requests shape what we stock so this page rarely looks the same twice.
Are new arrivals full price?
New lines launch at our normal trade prices. Keep an eye on our promotions pages for launch offers and bundles across the wider store.
Why shop New Arrivals at Fixings2Go?
Because the newest trade products reach you here first backed by the same trade prices and fast UK delivery as everything else we sell.
Need More Help Choosing from our New Arrivals?
Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.
