Round Wire Nails GalvanisedTimco Round Wire Nails Are Designed For General Clamping And Fixing In Timber Applications Where Medium Duty Corrosion Resistance Is Required. Manufactured From Carbon Steel With A Galvanised Finish, They Feature A 4.5mm Shank Diameter, 100mm Length And Full Round Head. Suitable For Service Class 2 Conditions And Conforming To Eurocode 5.
Clout Nails GalvanisedThese galvanised carbon steel clout nails are designed for fixing roofing felt, slate and shingles where a broad head is needed for secure hold and reduced pull through. Manufactured with a 2.65mm shank and 25mm length, they offer reliable performance for general roofing and external applications, with medium duty rust protection and conformity to Eurocode 5 service class 2.
Clout Nails - AluminiumThese Aluminium Clout Nails are designed for fixing roofing felt, slate and shingles, with a large diameter head that helps secure sheet materials firmly and reduces pull through. Manufactured from 2.65mm aluminium with a 38mm length, they offer good corrosion resistance and are suitable for roofing and external applications where rust protection and reliable holding performance are required.
Square Twist Nails - GalvanisedThese 30mm square twist nails are designed for fixing builders metalwork where improved grip is required. Manufactured from galvanised carbon steel with a 3.75mm shank, the twisted profile increases pull out resistance for a more secure fixing. Suitable for medium duty rust protection, they conform to Eurocode 5 and service class 2.
Presser Point Staples GalvanisedThese Galvanised Carbon Steel presser point staples are designed for fixing fencing and wire mesh in outdoor and general construction applications. Manufactured with a 2mm Shank Diameter and 20mm length, they provide reliable holding performance for timber fixing tasks. The galvanised finish offers medium duty rust protection, making them suitable for exposed environments.
Magnetic Socket Driver Bit - HexThis Magnetic Socket Driver Bit Is Designed For Installing 10mm Hex Headed Fasteners With A Power Tool. Made From S2 Hardened Carbon Steel, It Offers Strength And Wear Resistance For Repetitive Site And Workshop Use. The 65mm Length And 1/4 Inch Hex Shank Provide Secure Compatibility With Standard Bit Holders, While The High Strength Magnet Helps Retain Fixings During Fast, Controlled Driving.
Magnetic Catches WhiteThis Surface Mounted Magnetic Catch Is Designed For Light Duty Use On Cupboard And Cabinet Doors, Providing A Simple And Reliable Closing Solution. Finished In White For A Neat Appearance, It Measures 40 mm In Length And Offers A 4 kg Holding Strength, Making It Suitable For Domestic Furniture, Storage Units, And General Joinery Applications Where Secure Door Retention Is Required.
Impact Driver Bits - PHTIMCO Phillips impact driver bit designed for demanding fastening applications with impact tools. Manufactured from hardened carbon steel, it features a PH1 tip, 25mm length and 1/4 inch hex shank for secure compatibility with standard impact drivers and bit holders. The reduced body hardness helps absorb torque peaks under high load, while the black phosphate finish improves corrosion resistance and service life.
Impact Magnetic Socket DriverThis 1/4 Inch Shank impact magnetic socket driver is engineered for demanding fastening tasks with impact drivers. Designed for use with hex head screws, it withstands high rotational and downward force while providing secure bit engagement. The integrated high strength magnet helps hold fasteners in place during installation, and the 65 mm length offers controlled access in routine trade and site work.
Drive Screws - GalvanisedGalvanised Drive Screws Are Designed For Fixing Roofing And Cladding Sheets To Timber Purlins, Providing A Secure Hold In External And Structural Timber Applications. Manufactured From Carbon Steel With A 5.4mm Shank Diameter And 100mm Length, They Offer Medium Duty Rust Protection And Conform To Eurocode 5 And Service Class 2 Requirements.
Extra Large Head Clout Nails - GalvanisedThese Galvanised Carbon Steel extra large head clout nails are designed for secure fixing where increased clamping is needed. With a 3mm shank diameter and 13mm length, they are suitable for roofing felt, plasterboard and similar sheet materials. The galvanised finish offers medium duty rust protection and conforms to Eurocode 5 and service class 2 for reliable internal and sheltered external use.
Clip-On Cabinet Hinges - NickelThese Steel Clip On Cabinet Hinges are designed for overlay kitchen, bathroom and furniture cabinets, providing a clean concealed fit and reliable everyday operation. Featuring a 90° Opening, sprung action and clip on design for quick door removal, they suit 35mm rebates and are supplied with fixings for straightforward installation. The nickel finish offers a neat, durable appearance.
Twin Threaded Woodscrews PZ Double Countersunk ZincThese TIMCO twin threaded woodscrews are designed for fast, reliable fixing in soft timber and for masonry when used with a plastic plug. Manufactured from carbon steel with a zinc finish, they feature a double countersunk head to help reduce head shear, a Pozi recess for secure drive engagement, and a 25° sharp point for quick starting and improved thread acceptance.
Twin Threaded Woodscrews PZ Double Countersunk ZincThese TIMCO twin threaded woodscrews are designed for fast, reliable fixing in soft timber and for masonry when used with a plastic plug. Manufactured from carbon steel with a zinc finish, they feature a 6mm thread diameter, 80mm length, double countersunk head, Pozi recess and 25 degree sharp point for controlled drive, strong pull out resistance and reduced risk of head shear.
Twin Threaded Woodscrews PZ Double Countersunk ZincThese carbon steel twin threaded woodscrews are designed for fast, reliable fixing in soft timber and for masonry when used with a plastic plug. The double countersunk head helps reduce head shear and supports a neat flush finish, while the Pozi recess suits PZ1 driving. A 25 degree sharp point and 60 degree twin thread improve start speed, insertion and pull out resistance.
Spring Washers - ZincDesigned To Help Prevent Nuts From Loosening Under Vibration, This Square Section Spring Washer Is Suitable For General Fastening Applications In Assembly, Maintenance And Repair Work. Manufactured From Carbon Steel With A Zinc & Clear Cr3 Finish, It Offers Corrosion Resistance For Internal Use. This Washer Suits M10 Fixings And Measures 16mm Long, 5mm Wide And 2.5mm Thick.
Slab Nails - GalvanisedTIMCO Slab Nails Are Designed For Securing Insulation To Wood In Construction And Roofing Applications. Manufactured From Carbon Steel With A Galvanised Finish, They Offer Medium Duty Rust Protection And Conform To Eurocode 5 And Service Class 2. These Slab Nails Feature A 3.75mm Shank Diameter, 100mm Length, And Approximately 82 Pieces Per 1kg For Efficient Site Use.
Round Wire Nails - BrightThese 100mm bright round wire nails are manufactured from carbon steel with a 4.5mm shank diameter and a full round head for reliable clamping in general joinery and timber fixing tasks. Self coloured with no plating, they are suited to indoor applications and conform to Eurocode 5 and service class 1 requirements.
Round Wire Nails Stainless SteelThese A2 Stainless Steel round wire nails are designed for general clamping and fixing in external or corrosive environments, including Green Oak. Featuring a full round head, 4mm shank diameter and 100mm length, they offer reliable holding performance for construction and joinery applications. Suitable for service class 3 use and conforming to Eurocode 5.
Round Lost Head Nails - BrightThese 40mm Round Lost Head Nails are made from Bright Carbon Steel and are designed for indoor joinery, trim and second fix applications where a concealed finish is required. The round lost head can be punched below the timber surface for neat finishing before filling or painting. With a 2.36mm shank diameter, they provide reliable holding in general woodworking tasks.
Round Lost Head Nails - Stainless SteelRound Lost Head nails are designed for joinery and finishing work where a concealed fixing is required. The head can be punched below the timber surface for a neat result, while the 2.65mm shank diameter and 40mm length suit a range of internal and external woodworking tasks. Manufactured from A2 stainless steel, they offer strong corrosion resistance and are suitable for use with green oak and other corrosive timbers.
