Milwaukee Ratchet (Ratcheting Insulated Terminals Crimper)Ratcheting insulated terminals crimper for secure, repeatable connections on cable lugs, insulated terminals and end sleeves. Features 3 crimping cavities for red 0.3 to 1.0mm², blue 1.5 to 2.5mm² and yellow 4.0 to 6.0mm² connectors. Dual ratcheting action, a quick release lever and high contrast markings improve control, visibility and productivity.
Milwaukee Rasping Jab Saw Cutting AccessoryDesigned for cutting plasterboard and drywall, this rasping jab saw features a 150 mm extra strong blade for improved plunge cut durability and control. The coated finish helps resist corrosion, while built in rasping holes allow fast hole enlargement and smoother edge finishing on site.
Milwaukee Cooling Pva TowelThis Milwaukee cooling PVA towel helps reduce heat stress on site, during outdoor work or in warm industrial environments. Activate in 30 seconds with water for a cooling effect that lasts up to 4 hours, then re-wet to reuse. Made from comfortable polyester, it is machine washable and offers UPF 50+ protection certified to EN 13758-1.
Milwaukee Pry Bar 200mmCompact 200mm Milwaukee pry bar for pulling nails, levering and demolition work in tight spaces. Built with an all metal core and I Beam design for strength, it also features a chrome steel shaft, hammer ready strike cap and curved claw to improve leverage while reducing surface damage.
Milwaukee Blade Bi Metal Pack Of 3 1139.83 Mm X 8/10 TpiPremium bandsaw blades for cordless and corded deep cut bandsaws, designed for fast, clean cutting in angle iron, galvanised pipe, cast iron and stainless steel. Featuring 1139.83 x 12.7 x 0.51 mm dimensions and 8/10 Tpi Matrix II high speed steel teeth with 8% cobalt, these bi metal blades deliver longer life and fewer blade changes.
Milwaukee Chisel Pointed 250 Mm SDS Plus FitmentThe Milwaukee pointed chisel with SDS Plus fitment is designed for precise breaking, chasing and demolition in masonry and concrete. Its 250 mm length helps reach confined areas, while the SDS Plus shank ensures secure compatibility with suitable rotary hammers for efficient power transfer and fast accessory changes.
Milwaukee Pocket Level MagneticCompact pocket level for quick levelling and angle checks on site, ideal for pipework, framing and general installation work. Features a 360° adjustable vial for accurate angle reading, a milled edge for precision, and a V groove for use on pipes. Rare earth magnets provide strong holding power, while the locking mechanism supports repetitive use.
Milwaukee Plastic CutterDesigned for clean cutting of plastic pipe and conduit, this cutter handles PEX, PB, MDP, PE, rubber and silicon hoses up to 25 mm. The V shaped blade delivers straight cuts without crushing the material, while the replaceable stainless steel blade, corrosion resistant head and metal core construction support long service life on site.
Milwaukee Packout XL Mounting Plate SystemThe Milwaukee PACKOUT XL Mounting Plate turns compatible PACKOUT storage into secure stationary workshop organisation. Built from impact resistant polymers with metal reinforced mounting points, it supports heavy loads and suits multiple mounting configurations. Ideal for tool storage walls, benches and van setups, it connects with all Milwaukee PACKOUT modular storage components.
Milwaukee Packout Wire Basket SystemPart of the Milwaukee PACKOUT Shop Storage range, this wire basket provides organised storage for gloves, bit sets, bottles and sprays. The click and lock mounting system delivers secure, fast installation and easy access to frequently used items, making it suitable for workshops, vans, garages and trade storage setups.
Milwaukee Packout Tumbler 887 MlThis Milwaukee PACKOUT tumbler is designed for site, travel and everyday use, with 887 ml capacity and double wall vacuum insulation to help retain hot or cold drinks for longer. Made from durable 18/8 stainless steel, it features a rotating magnetic closure, dishwasher safe construction, and a twist and lock connection compatible with all PACKOUT components.
Milwaukee Packout Tool Box SystemPart of the Milwaukee PACKOUT modular storage system, this trolley tool box is built for transporting tools and accessories across demanding sites. It features 113 kg load capacity, impact resistant polymer construction, an industrial grade extension handle and oversized 228 mm all terrain wheels. The IP65 weather seal helps protect contents from rain and debris.
Milwaukee Packout Tumbler 591 Ml RedThe Milwaukee PACKOUT tumbler is a durable drinking vessel for site work, travel and workshops, with 591 ml capacity and double wall vacuum insulation to keep drinks hot or cold for longer. Made from 18/8 stainless steel, it features a rotating magnetic closure, dishwasher safe design, and twist and lock compatibility with all PACKOUT components.
Milwaukee Packout Side Mount TrayDesigned for organised tool storage, this Milwaukee PACKOUT side mount tray attaches to PACKOUT rails in either orientation for flexible access on site or in the workshop. Its impact resistant body suits demanding use, while compatibility with PACKOUT bins, magnetic trays and SHOCKWAVE bit sets helps keep hand tools, tapes, gloves and accessories close to hand.
Milwaukee Packout Tool Tray SystemThe Milwaukee PACKOUT tool tray adds flexible organisation for tools, fixings and accessories within compatible PACKOUT storage. It fits the Large Box, Trolley Box, XL Tool Box and Rolling Tool Chest, and includes Quick Adjust Dividers for custom layouts. With a top carry handle for transport and a 11 kg weight capacity, it supports efficient site storage as part of the PACKOUT modular system.
Milwaukee Packout M18 Battery Rack AttachmentThis PACKOUT side mount M18 battery rack attaches to PACKOUT rails in either orientation, providing flexible battery storage for tool boxes, trolleys and workstations. Designed for organised access on site or in transit, it stores up to 3 M18 batteries and features an impact resistant body for reliable use within the PACKOUT modular storage system.
Milwaukee Packout Tool Box Accessory SystemThe Milwaukee PACKOUT side mount mounting plate attaches to PACKOUT rails in either orientation, giving flexible storage for shop storage products and compact organisers. Built with an impact resistant body, it supports organised access to compatible tool box, trolley and workbench accessories. Part of the PACKOUT modular storage system for efficient workshop and van storage.
Milwaukee Packout Tool Box Accessory SystemThe Milwaukee PACKOUT side mount M12 battery rack attaches to PACKOUT rails in either orientation, adding flexible battery storage to tool boxes, trolleys and modular setups. It stores up to 3 M12 batteries and features an impact resistant body for reliable use on site, in workshops and service vehicles.
Milwaukee Packout Side Mount Long Tool HolderDesigned for quick access to levels, pry bars and other long tools, this Milwaukee PACKOUT side mount holder attaches to PACKOUT rails in either orientation for flexible setup. The metal construction and reinforced base help keep tools secure, while carabiner style gates allow fast loading and removal on site, in vans or workshops.
Milwaukee Packout Tool Box Accessory SystemSide mount hand tool holder for Milwaukee PACKOUT modular storage, designed to attach to PACKOUT rails in either orientation for flexible setup. The impact resistant body supports daily site use, while adjustable dividers and a large belt clip improve organisation. Holds tools up to 25 cm long securely during transit.
Milwaukee Packout Tool Box Attachment Adapter 2 PackDesigned for use with PACKOUT modular storage, these side mount adapters attach securely to PACKOUT metal rails in either orientation for flexible toolbox setup. The impact resistant body supports regular site use, while the design allows fast fitting and removal of compatible attachments. Supplied as a 2 pack for expanding storage options across tool boxes, trolleys and workstations.
Milwaukee Packout Tool Box Accessory System 3 Hook AttachmentThe Milwaukee PACKOUT 3 hook attachment adds flexible tool storage to compatible rails in either orientation. Reinforced J hooks support hand tools and equipment, while the hooks lift and lock to 90 degrees when not in use. Built for the PACKOUT modular storage system, it offers a 11.3kg weight capacity for organised workshop, van or site setup.
