837 products

  • Magnetic Impact Screw Guide

    TIMCO - 75SGX6Timco Magnetic Impact Screw Guide

    From 3 - 4 Working Days

    Magnetic Impact Screw GuideThe TIMCO Magnetic Impact Screw Guide Is An Impact Resistant Driver Accessory For Controlled Screw Installation With Impact Drivers. Its Sliding Sleeve Holds The Screw Straight For Consistent 90° Driving And A Flush Finish, While The High Strength Magnet Improves Bit Engagement And Fastener Retention. The Sleeve Also Covers Sharp Screw Threads To Help Reduce Finger Contact During Repetitive Fixing Work.

    From 3 - 4 Working Days

    £4.14 Ex. VAT £4.97 In. VAT

  • Magnetic Screw Holder

    TIMCO - 53MSHX6Timco Magnetic Screw Holder

    From 3 - 4 Working Days

    Magnetic Screw HolderThe TIMCO Magnetic Screw Holder Is Designed For Controlled Installation Of Flat Head Screws With Impact Driver Setups. Its High Strength Magnet And Sliding Magnetic Sleeve Hold The Screw Securely For Single Handed Use In Vertical Or Horizontal Fixing Tasks. The Impact Resistant Construction Suits Trade And DIY Applications Where Accurate Screw Starting And Reduced Drop Risk Are Required.

    From 3 - 4 Working Days

    £5.17 Ex. VAT £6.20 In. VAT

  • Impact Driver Bits - Hex Timco Impact Driver Bits, Hex Steel, Lime

    TIMCO - 5 optionsTimco Impact Driver Bits, Hex Steel, Lime

    From 3 - 4 Working Days

    Impact Driver Bits - HexDesigned For Hex Fastening With High Powered Impact Drivers, These Impact Bits Use Hardened Carbon Steel And A Developed Heat Treatment Process To Improve Service Life Under Repeated Torque Peaks. Reduced Body Hardness Helps Absorb High Loads And Limit Breakage, While The Black Phosphate Finish Supports Corrosion Resistance In Trade And DIY Fixing Applications.

    From 3 - 4 Working Days

    £7.57 Ex. VAT £9.08 In. VAT

  • Holesaw Hex Shank Extension Rod

    TIMCO - HSETimco Holesaw Hex Shank Extension Rod

    From 3 - 4 Working Days

    Holesaw Hex Shank Extension RodThe TIMCO Holesaw Hex Shank Extension Rod Is Designed To Extend Reach When Drilling With Compatible Holesaw Arbors. Suitable For Trade And DIY Cutting Applications, It Fits 11mm Hex Shank Arbors And Helps Access Deeper Or Recessed Positions In Timber, Sheet Materials And Similar Workpieces. A Practical Holesaw Extension Rod For Power Tool Cutting Accessories.

    From 3 - 4 Working Days

    £5.40 Ex. VAT £6.48 In. VAT

  • Holesaw Arbor - Hex Shank Timco Holesaw Arbor, Hex Shank

    TIMCO - 3 optionsTimco Holesaw Arbor, Hex Shank

    From 3 - 4 Working Days

    Holesaw Arbor - Hex ShankTIMCO Holesaw Arbor With Hex Shank For Secure Fitting In Standard Drill Chucks And Compatible Power Drills. Supplied With A Pilot Drill, It Is Designed For Accurate Hole Starting And Reliable Cutting When Used With 14 To 30mm Holesaws. Suitable For Electrical Installation, Joinery, Plumbing And General Trade Applications Requiring Clean, Controlled Holes In Compatible Materials.

    From 3 - 4 Working Days

    £4.18 - £6.65 Ex. VAT £5.02 - £7.98 In. VAT

  • Hex Shank Speed Auger Bit Timco Hex Shank Speed Auger Bit Steel

    TIMCO - 3 optionsTimco Hex Shank Speed Auger Bit Steel

    From 3 - 4 Working Days

    Hex Shank Speed Auger BitThe TIMCO Hex Shank Speed Auger Bit Is Made From High Grade Carbon Steel For Drilling Clean, Accurate Holes In Timber. Its Four Flute Cutter Design Supports Rapid Chip Ejection, While The Screw Point Helps Pull The Bit Into The Material. A Hex Shank With 1/4 Inch Quick Release Provides Secure Fitting In Compatible Drills And Impact Drivers.

    From 3 - 4 Working Days

    £4.58 - £7.77 Ex. VAT £5.49 - £9.32 In. VAT

  • Masonry Nails - Washered - Zinc Timco Masonry Nails, Washered, Zinc Steel

    TIMCO - 7 optionsTimco Masonry Nails, Washered, Zinc Steel

    From 3 - 4 Working Days

    Masonry Nails - Washered - ZincThese Washered Masonry Nails Are Designed For Securing Thin Sheet Materials Such As Plastic Trunking, Cable Trays And Light Fixings To Masonry And Concrete Blocks. Manufactured From Hardened Carbon Steel With A Bright Zinc Plated Finish, They Provide Internal Corrosion Resistance And High Driving Strength. The Loose Washer Increases Clamping Area, While The 35° Sharp Point Supports Fast Penetration Into Hard Substrates.

    From 3 - 4 Working Days

    £5.01 - £9.20 Ex. VAT £6.01 - £11.04 In. VAT

  • Lipped Drop In Anchors - Zinc Timco Lipped Drop In Anchors, Zinc Steel

    TIMCO - 2 optionsTimco Lipped Drop In Anchors, Zinc Steel

    From 3 - 4 Working Days

    Lipped Drop In Anchors - ZincThese Internally Threaded Drop In Anchors Are Hammer Set Expansion Fixings For Heavy Duty Anchoring Into Concrete. Made From Zinc Finished Carbon Steel, The Lipped Design Sits Flush To The Surface And Helps Prevent Over Insertion. Suitable For Mechanical, Electrical And Construction Installations, They Provide An All Steel, Non-Flammable Fixing In Support Of BS 7671 18th Edition Wiring System Requirements.

    From 3 - 4 Working Days

    £7.20 - £9.01 Ex. VAT £8.64 - £10.81 In. VAT

  • Metal Speed Plugs with Screws - Zinc

    TIMCO - TBAZSTTimco Metal Speed Plugs With Screws, Zinc Steel, Lime

    From 3 - 4 Working Days

    Metal Speed Plugs With Screws - ZincThese Metal Speed Plugs Provide A Rapid Light Duty Fixing For Plasterboard And Cavity Applications. The 3 Point Tip Supports Quick Insertion, While The Cross Recess Head Allows Installation With A Pozi Or Cross Drive Screwdriver. Supplied With Zinc Plated Pan Head Screws In 4.5 X 30mm, They Are Suitable For Secure Fixing Of Lightweight Brackets, Trims And Accessories.

    From 3 - 4 Working Days

    £25.19 Ex. VAT £30.23 In. VAT

  • Mixed Tray - Nuts - Zinc

    TIMCO - TRAY540Timco Mixed Tray, Nuts, Zinc Steel

    From 3 - 4 Working Days

    Mixed Tray - Nuts - ZincThis TIMCO Mixed Tray Contains A Practical Selection Of Commonly Used Nuts For Repair, Installation And Maintenance Work. Manufactured From Carbon Steel With A Zinc Plated, Clear Passivated Finish, The Assortment Offers Corrosion Resistance For General Interior Fixing Tasks And Trade Use Across Electrical, Construction And Workshop Applications.

    From 3 - 4 Working Days

    £7.75 Ex. VAT £9.30 In. VAT

  • Mixed Tray - Pins & Nails - Bright

    TIMCO - TRAY680Timco Mixed Tray, Pins & Nails, Bright Steel

    From 3 - 4 Working Days

    Mixed Tray - Pins & Nails - BrightThis TIMCO Mixed Tray Contains A Practical Selection Of Pins And Nails For General Internal Fixing, Joinery, Trim And Light Carpentry Work. Manufactured From Carbon Steel With A Bright Finish, The Assortment Provides Convenient Stock For Site, Workshop Or Maintenance Use Where Multiple Small Fixings Are Required.

    From 3 - 4 Working Days

    £7.75 Ex. VAT £9.30 In. VAT

  • Mixed Tray - Self-Tapping Screws – Zinc

    TIMCO - TRAY440Timco Mixed Tray, Self-Tapping Screws – Zinc

    From 3 - 4 Working Days

    Mixed Tray - Self-Tapping Screws - ZincThis TIMCO Mixed Tray Provides A Practical Assortment Of Zinc Plated Self Tapping Screws For Metal To Metal Fixing. Supplied With Three Head Types, It Supports General Fabrication, Repairs, Installation Work, And Maintenance Tasks. Designed For Use With A Pre Drilled Pilot Hole, The Zinc Finish Helps Improve Corrosion Resistance In Indoor And Dry Trade Environments.

    From 3 - 4 Working Days

    £7.75 Ex. VAT £9.30 In. VAT

  • Mixed Tray – Woodscrews - Zinc

    TIMCO - TRAY370Timco Mixed Tray – Woodscrews, Zinc

    From 3 - 4 Working Days

    Mixed Tray Woodscrews ZincThis TIMCO Mixed Tray Contains Countersunk Woodscrews For General Fixing Into Timber And Man-Made Boards. The Zinc Plated And Clear Passivated Finish Provides Corrosion Resistance For Internal Applications, While The Assorted Tray Format Supports Workshop, Site And Maintenance Use Where Multiple Screw Sizes Are Required.

    From 3 - 4 Working Days

    £7.75 Ex. VAT £9.30 In. VAT

  • Mixed Tray - Screws Plug & Drill Bit – A2 Stainless Steel

    TIMCO - TRAY280Timco Mixed Tray, Screws Plug & Drill Bit – A2 Stainless Steel Wood

    From 3 - 4 Working Days

    Mixed Tray Screws Plug & Drill Bit A2 Stainless SteelThis Mixed Tray Contains Countersunk Woodscrews, Nylon Wall Plugs And A 6mm Masonry Drill Bit For Fixing Timber, Brackets And General Components Into Masonry. Manufactured From Austenitic Stainless Steel A2 304, The Screws Provide Corrosion Resistance For Outdoor Use, While The Included Plugs Support Reliable Installation In Brick, Block And Concrete.

    From 3 - 4 Working Days

    £15.07 Ex. VAT £18.08 In. VAT

  • Mixed Tray - Screws Plug & Drill Bit - Zinc Timco Mixed Tray, Screws Plug & Drill Bit, Zinc Wood

    TIMCO - 2 optionsTimco Mixed Tray, Screws Plug & Drill Bit, Zinc Wood

    From 3 - 4 Working Days

    Mixed Tray - Screws Plug & Drill Bit - ZincThis Mixed Fixing Tray Contains Countersunk Zinc Plated And Clear Passivated Woodscrews With Nylon Wall Plugs For Secure Masonry Fixing. Supplied With A 6mm Masonry Drill Bit, It Provides A Practical Assortment For Trade And DIY Installation, Covering General Timber, Bracket, Fixture And Repair Applications In A Zinc Finish.

    From 3 - 4 Working Days

    £7.75 Ex. VAT £9.30 In. VAT

  • Mixed Nuts Grab Pack - Zinc

    TIMCO - NUTGPACKTimco Mixed Nuts Grab Pack, Zinc Steel

    From 3 - 4 Working Days

    Mixed Nuts Grab Pack - ZincThe TIMCO Mixed Nuts Grab Pack Provides A Practical Assortment Of Commonly Used Zinc Plated Nuts For Repairs, Installation Work, And General Fixing Tasks. Manufactured From Carbon Steel, The Nuts Are Supplied In A Handy Reusable Storage Pack With A Clip Shut Lid, Helping Keep Sizes Organised For Trade, Workshop, And Site Use.

    From 3 - 4 Working Days

    £18.60 Ex. VAT £22.32 In. VAT

  • Mixed Cotter Pins

    TIMCO - MIXCOTTERPTimco Mixed Cotter Pins Steel, Zinc

    From 3 - 4 Working Days

    Mixed Cotter PinsMixed Cotter Pins Are Zinc Finished Carbon Steel Split Pins Designed To Secure Clevis Pins, Linkages, Shafts And General Mechanical Fixings. The Assorted Sizes Provide Flexible Stock For Workshop, Maintenance And Installation Tasks, Offering A Simple Locking Method For Components That Require Retention With Easy Removal During Servicing.

    From 3 - 4 Working Days

    £0.81 Ex. VAT £0.97 In. VAT

  • Mixed R Spring Clips

    TIMCO - MIXRSPRINGPTimco Mixed R Spring Clips Steel, Zinc

    From 3 - 4 Working Days

    Mixed R Spring ClipsTimco Mixed R Spring Clips Are Designed To Secure The Ends Of Round Shafts, Pins And Axles In Mechanical And Electrical Fixing Applications. Manufactured From Carbon Steel With A Zinc Finish, They Provide Reliable Retention, Corrosion Resistance And Quick Installation For Maintenance, Assembly And General Fastening Tasks.

    From 3 - 4 Working Days

    £0.81 Ex. VAT £0.97 In. VAT

  • Masonry Screws - TX - Pan - Zinc Timco Masonry Screws, Tx, Pan, Zinc

    TIMCO - 6 optionsTimco Masonry Screws, Tx, Pan, Zinc

    From 3 - 4 Working Days

    Masonry Screws - TX - Pan - ZincThese Zinc Pan Head Masonry Screws Provide A Rapid Light Duty Fixing For Attaching Ironmongery To Concrete, Stone And Brick Without Nylon Plugs. The TX25 TX Drive Helps Reduce Wear And Cam Out, While Serrated V Threads And High Low Threads Support Easier Insertion. An All Steel, Non Flammable Fixing, It Supports BS 7671 18th Edition Requirements For Secure Wiring System Support.

    From 3 - 4 Working Days

    £1.46 - £6.00 Ex. VAT £1.75 - £7.20 In. VAT

  • Masonry Screws - TX - Countersunk - Zinc Timco Masonry Screws Zinc

    TIMCO - 8 optionsTimco Masonry Screws Zinc

    From 3 - 4 Working Days

    Masonry Screws - TX - Countersunk - ZincThese Zinc Countersunk Masonry Screws Provide A Light Duty Fixing For Ironmongery, Brackets And Electrical Supports Into Concrete, Stone And Brick Without Nylon Plugs. The TX25 TX Drive Reduces Cam Out, While Serrated V Threads And High Low Threads Aid Fast Insertion. All Steel Construction Supports Compliance With BS 7671 18th Edition.

    From 3 - 4 Working Days

    £1.46 - £5.75 Ex. VAT £1.75 - £6.90 In. VAT

  • Metal Speed Plugs & Screws - Zinc

    TIMCO - 3 optionsTimco Metal Speed Plugs & Screws, Zinc Steel

    From 3 - 4 Working Days

    Metal Speed Plugs & Screws - ZincMetal Speed Plugs And Screws Are Light Duty Plasterboard Fixings For Fast Installation In Cavity Walls And Dry Lining. The Zinc Plated Carbon Steel Alloy Plug Features A 3 Point Tip For Quick Insertion, While The Cross Recess Head Allows Fitting With A Pozi Or Cross Drive Screwdriver. Supplied With 4.5 X 30mm Pan Head Screws For Secure General Fixing Applications.

    From 3 - 4 Working Days

    £0.81 - £9.25 Ex. VAT £0.97 - £11.10 In. VAT

  • Metal Cavity Anchors - Zinc

    TIMCO - 12 optionsTimco Metal Cavity Anchors, Zinc Steel

    From 3 - 4 Working Days

    Metal Cavity Anchors - ZincThese Zinc Finished Metal Cavity Anchors Are Manufactured From Carbon Steel For Secure Fixing Into Plasterboard And Hollow Wall Applications. Suitable For Radiators, Brackets, Hand Rails And Shelving Units, They Expand Behind The Board To Spread Load And Improve Hold. For Batch Installation, Use With A TIMCO Setting Tool For Faster, Consistent Anchor Expansion.

    From 3 - 4 Working Days

    £0.81 - £15.44 Ex. VAT £0.97 - £18.53 In. VAT

  • Hinged Screw Caps - Small - Yellow

    TIMCO - SHCCYELLOWPTimco Hinged Screw Caps, Small, Yellow Plastic

    From 3 - 4 Working Days

    Hinged Screw Caps - Small - YellowThese Small Yellow Hinged Screw Caps Provide A Neat Cosmetic Cover For Exposed Screw Heads In Decorative, Mirror And General Fixing Applications. Made From Gloss Plastic, The One Piece Hinged Design Helps Retain The Cap During Installation While Allowing Access To The Screw Head For Future Adjustment Or Removal. Suitable For Improving Appearance And Reducing Exposure To Moisture And Corrosion.

    From 3 - 4 Working Days

    £1.46 Ex. VAT £1.75 In. VAT

  • Hinged Screw Caps - Small - Dark Grey

    TIMCO - SHCCDGREYPTimco Hinged Screw Caps, Small, Dark Grey Plastic

    From 3 - 4 Working Days

    Hinged Screw Caps - Small - Dark GreyThese Small Dark Grey Hinged Screw Caps provide a neat cosmetic cover for exposed screw heads on decorative, mirror, furniture and general fixing applications. Made from Gloss Plastic, the one piece hinged design helps retain the cap during installation while allowing later access to the screw head. They also help shield fixings from moisture and surface exposure to slow corrosion.

    From 3 - 4 Working Days

    £1.46 Ex. VAT £1.75 In. VAT


You have seen 264 out of 837 products

Shop Reliable Fixings & Fasteners Built for Every Job

Discover the strength and reliability you need for every project with our Fixings & Fasteners category at Fixings2Go. Here you will find a wide selection of essential items built to deliver secure connections and long lasting performance in construction woodworking and general building tasks.

Types of Fixings & Fasteners

We stock a comprehensive range of products designed to meet the demands of construction timber work and masonry projects. Options include exterior green coated finishes that perform well outdoors zinc plated items for reliable corrosion resistance in general use and A2 stainless steel versions that offer excellent durability in tougher conditions.

Coach Screws

Heavy duty hex head fasteners ideal for robust timber to timber connections. They deliver strong grip and simple installation making them perfect for fencing gates decking and structural framing.

Carriage Bolts

Classic dome headed bolts complete with nuts and washers. These provide secure clamping power and a smooth finish suiting heavy timber assemblies and outdoor framing applications.

Set Screws and Hex Bolts

Strong fasteners with hex heads for easy driving. Available in various grades they excel in machinery assembly metal fabrication and situations where a firm reliable hold is essential.

Machine Screws and Socket Screws

Precision threaded fasteners including countersunk and button head styles. They offer a neat low profile finish and work brilliantly for furniture equipment maintenance electronics housings and metal to metal assemblies.

Structural Connectors

Galvanised hangers brackets and plates including joist hangers multi functional hangers angle brackets flat connector plates truss clips and corner braces. These provide excellent support and stability in timber framing roof trusses floor joists and building frameworks.

Anchors and Masonry Fixings

Reliable solutions for brick block and concrete including drop in anchors through bolts nylon frame fixings and chemical anchor studs. They deliver strong holding power for securing shelving handrails fixtures and wall mounted installations.

Threaded Products

Versatile threaded bars rods studding and coupling nuts. These allow adjustable lengths and custom assemblies making them ideal for suspended ceilings plumbing supports mechanical installations and flexible on site builds.

Key Features and Popular Uses

These Fixings & Fasteners deliver strong grip reliable hold and easy installation across timber framing metalwork masonry and structural projects with excellent corrosion resistance for lasting performance.

Category

Examples

Key Features

Popular Uses

Screws & Bolts Coach Screws Carriage Bolts Set Screws Hex Bolts Hex heads for easy driving exterior coatings various grades Timber framing fencing gates metal assemblies
Machine & Socket Screws Metric Threaded PZ Countersunk Button Head Precise threading low profile options zinc or stainless Equipment furniture maintenance tasks
Structural Connectors Joist Hangers Angle Brackets Truss Clips Corner Braces Galvanised for protection multi functional designs Roof and floor framing timber support
Anchors & Masonry Fixings Drop In Anchors Through Bolts Nylon Frame Fixings Chemical Studs Strong hold in concrete and brick quick installation Wall fixtures shelving handrails
Threaded Products Threaded Bars Rods Studding Coupling Nuts Adjustable lengths reliable threading Suspended systems mechanical supports custom builds

Frequently Asked Questions

What are Fixings & Fasteners used for?

Fixings & Fasteners are used to join secure or support materials in construction woodworking metalwork masonry and general building tasks. They help create strong reliable connections for everything from timber framing and shelving to machinery assembly and wall mounted fixtures.

What is the difference between coach screws and carriage bolts?

Coach screws are heavy duty threaded fasteners driven directly into timber for strong timber to timber connections. Carriage bolts pass through materials and are secured with nuts and washers creating a clamped fixing with a smooth dome head finish.

When should I use anchors and masonry fixings?

Anchors and masonry fixings are best for securing items into brick block and concrete. They are commonly used for handrails shelving brackets fixtures and other wall mounted installations where a strong hold in masonry is required.

Are stainless steel Fixings & Fasteners suitable for outdoor use?

Yes A2 stainless steel Fixings & Fasteners offer excellent durability and corrosion resistance making them suitable for many outdoor and demanding environments. They are a strong choice where moisture weather exposure or long term performance matters.

What are structural connectors used for?

Structural connectors such as joist hangers angle brackets truss clips plates and corner braces are used to support and strengthen timber frameworks. They are popular in roof structures floor joists timber framing and general construction work.

Why choose threaded bars rods and studding?

Threaded bars rods and studding provide flexible adjustable fixing solutions. They can be cut to length and used with nuts washers or coupling nuts making them ideal for suspended ceilings plumbing supports mechanical installations and custom assemblies.

How do I choose the right Fixings & Fasteners for my project?

Consider the materials you are joining the load requirement the installation environment and the finish needed. Timber projects may need coach screws or structural connectors while masonry work may require anchors and metal assemblies often suit set screws hex bolts or machine screws.

Why shop for Fixings & Fasteners at Fixings2Go?

Fixings2Go offers a wide range of reliable Fixings & Fasteners for trade and DIY use. With options for timber masonry metalwork and structural jobs you can find the right product to complete projects securely efficiently and with confidence.

Need More Help Choosing the Right Fixings & Fasteners?

Our friendly customer service team are always ready to provide answers offer support and share information. So if you are still unsure on which product best suits your needs or for any other questions or queries please do not hesitate to give us a call on 01424 220384.

© 2026 Fixings2Go

      Login

      Forgot your password?

      Don't have an account yet?
      Create account